How to import the schema to a designated tablespace file?

Similar Questions

• How to import the previous design (presentation of phone) in an existing project?

  How to import the previous design (presentation of phone) in an existing project?

  Of course, two ways actually.

  1: open the two sites against muse and do a select all and copy and paste, or

  2: in the one that you want to import, all select and add to the library, you can easily use this same design on as many sites as you like by adding to your library.

• Import the schema from one instance to another

  Hello
  
  I'm going through a pattern of a (production) Oracle instance to another (development) that is located on a different server. I modified this two years ago, and the data are now obsolete. We do export every night of all schemas and I only want to import the schema of "Bob" in dev. I copied the export file to the dev server and used the following command:
  
  Sys IMP / < password > file = server.dmp fromuser = bob ignore = y
  
  The import worked well for a bit, then I started getting errors cannot create scopes on the tablespace and possibly the imp stopped. I check, and of course, like many primary tablespace which is strange since the two prod and the dev team have the same size. In any case, I went in and has doubled the size of the index and the data of the tablespaces and tried to import again.
  
  This time, I got the following:
  
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYS. XPKACCOUNT_TRANSACTION) violated
  Column 1 3956
  2 1074785 column
  Column 3 20 - APR - 2001:08:57:44
  Column 4 483
  Column 5 52905
  Column 6 CR
  Column 7-. 72
  Column 8
  Column 9 47650
  Column 10
  Column 11
  Column 12
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYS. XPKACCOUNT_TRANSACTION) violated
  Column 1 3957
  2 1076007 column
  Column 3 20 - APR - 2001:13:38:04
  Column 4 483
  Column 5 24290
  Column 6 CR
  Column 7-. 26
  Column 8
  Column 9 47839
  Column 10
  Column 11
  Column 12
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYS. XPKACCOUNT_TRANSACTION) violated
  3958 1 column
  2 1076015 column
  Column 3 20 - APR - 2001:13:38:54
  Column 4 483
  Column 5 24290
  Column 6 CR
  Column 7-. 09
  Column 8
  Column 9 47842
  Column 10
  Column 11
  Column 12
  
  I use the "ignore = y ' option it will ignore a problem if the object already exists, but it adds the data to import or clear and then add it? I'm guessing that he tries to add data, which are the cause of the errors.
  
  I remember in the past, the only way I got this job was to open a session as long as sys, delete user Bob w/waterfall, and then re-create the user before importing. This seems to be a royal pain in the lacrosse.
  
  Did I miss something on how to properly import the schema?
  
  Thank you

  This works. If you have changes of geometry in the table, it's probably best to drop the scheme or at least the table. What if all you want to do is update the data and nothing else has changed, then you can simply truncate and then import the data.

  Dean

• Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  There is no built-in way to add client certificates to Firefox for mobile. We hope to add this in a future version.

  See this previous question for some (kind of complicated) ways to add client certificates in the current version of Firefox for mobile:
  https://support.Mozilla.com/en-us/questions/786035?s=certificate & As = s

• I have a scan disc inserted in the port SD/MMC-MS-pro to my laptop how to import the photos in the scandisk?

  I have a scan disc inserted in the port SD/MMC-MS-pro to my laptop how to import the photos in the scandisk?

  Hello

  Try the tips on this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/when-uploading-pictures-from-memory-card-it-now/b9197f43-B594-48B4-832f-ab547ee3b1ce

  B Eddie

• can someone help me and show me how easily an e-mail website links to friends. How to import the address book (yahoo mail) personal information manager to send the links to the web sites of my contacts.

  can someone help me on how to e-mail easily links to websites with friends. also need to know how to import the address book for (yahoo mail) personal information manager to send links to the web sites of my contacts.

  Hi Claytoncharles,

  I suggest you follow the link provided below, which has the similar problem

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/trying-to-send-page-or-link-via-email-but-not/a8be4248-B803-41F6-9014-386301acb67e

  You can also view the article for more information:

  Import, export, or change the format for contacts

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts

• How to import the mp4 files, it does not work on my mac

  How to import the mp4 files, it does not work on my mac

  If you try to import a video to use as a guide in your timeline, the video must be H.264 with AAC audio. You cannot use the other MP4 videos with other codecs (such as the MPEG-4 video codec).

• How to import the shade of color in Indesign

  Hi guys.  I am relatively new to this. How to import the shades of color, that I rescued in Kuler in InDesign please?

  Peter,

  If you have the latest version of InDesign, you can access your themes for Windows > Extensions > Adobe color themes

• ORA-04031 then that he was trying to import the schema to XE

  Hello. I have Linux Amazon 'micro instance' EC2 (Yes, virtual machine) which has 613 MB of memory. I installed Oracle XE 11.2.0.2 and now try to import the schema of 11.2 oracle server standard edition:
  Impdp system/pwd dumpfile = mydump schema myschema =
  
  But I got the following error:
  ...
  Object type SCHEMA_EXPORT/TABLE/TABLE processing
  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  UDI-04031: operation has generated ORACLE 4031 error
  ORA-04031: unable to allocate 32 bytes of memory ('pool', ' SELECT job_id FROM v$ datapum... ") (', 'SQLA","tmp") shared
  
  Is - this 613 MB of RAM enough for execution of XE? Here is the output of the memory:
  
  SQL > show sga
  
  Total System Global Area 250523648 bytes
  Bytes of size 2225472 fixed
  239078080 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 5025792 bytes

  613 MB of RAM enough for execution of XE?

  The minimum recommended is 512 MB, so in theory it should be enough.

  Total System Global Area 250523648 bytes

  Which is less than 250 MB. With most of the facilities of Oracle, GR 11, 2, I'd rather have at least 512 MB for the SGA. But we must leave some room for the OS and PGA are an allowance separate memory for the instance as well. Are likely to shrink the PGA and give a little more room to SGA_TARGET or MEMORY_TARGET, depends on what has been tweeked, and which is still in the default settings.

  Take a look at the default value of the boot settings, in your alert log, find the last start, the lines between the "parameters of the system with default values:" and maybe a date stamp then, stick it in you, we could can help with suggestions to try.

• How to import the mp4 in InDesign? Import fails

  How to import the mp4 in InDesign? All I get is the "failed to import" a message @.

  It seems that iMovie did not create a valid MP4 file. If you have InDesign CS6, you should also have installed Adobe Media Encoder in your Applications folder. Open and he re - save in the SOUL, and then re-import. (I have had no problem whatsoever with MP4 files in InDesign, but never export them from iMovie). You can also use another video encoding utility of your choice.

• How to choose the scheme of work of a different database instead of the database target

  Hi everyone, can you please answer to my problem.
  
  Q1.is it is mandatory that the two target schema schema and work must present in a database.if not then How to choose the scheme of work of another data base instead of target database schema. Please suggest.
  
  __Description__
  
  My work, my work patterns in odi's in a database schema and target in a different database,
  Now I'm dataserver with identification of the target or credentials of scheme work information.
  Here's the problem.
  
  I can't see scheme of work in the drop-down list when you create the physical schema with data server with the credentials of the target.
  
  It's obvious that he cannot show the workschema which presents in an another database.because - database server has the schema of the target database credentials.
  
  Vice versa
  
  Please suggest
  
  Concerning
  Chantal

  Hello

  Your KM will create the tables for working in the schema, you write to and that's why you have the problem:

  create table< %="odiRef.getTable" ("l",="" "int_name",="" "w")="" %="">

  I don't know of an option to replace this 'W' that will say 'go and get work in the staging area, I've specified.

  I guess that you can customize the KM and pass all the commands to Execute on the Source tab, or I guess you could specify the schema for each of the steps to be the logic diagram of the various staging areas.

  BUT I don't know if it would work throughout and I think it will create a massive Mount of work unnecessarily.

  Is there a decent reason why you can not have the staging area on the target?

• How to import the .sql file in oracle apex?

  I am new to oracle apex...
  
  How to import the .sql file in oracle apex?
  
  I have to import a table in apex...
  
  This script I have to write in the .sql file...
  
  pls help...
  
  Published by: 794244 on January 31, 2011 21:31

  Hi Manu

  You can import and browse workshop SQL, SQL Scripts .sql files. If you have multiple SQL statements in your script, make sure that they are separated by the / character

  Andy

• How to import the logo into the clip and display it during the full clip

  Hi all

  I use Adobe Premiere Pro CS4.

  I am now a different DVD project that I've done since the time.

  Now, I'll use these them in a commercial of things if I want to add a logo on the clips to keep my rights... etc.

  Here is the situation:-

  (1) the import of the item in Adobe Premiere Pro CS4.

  (2) import the logo image I want to use.

  (3) right click on the video file and click Insert.

  Now, I want to know how to import the image file into the video so it's being there during the full clip?

  I tried several times to import it, but found that it displays seperatey after or before the clip or in the environment I want to be displayed during the entire film.

  Also, it is great when I posted I want to resize it to be in the upper right of the clamp.

  Thank you very much

  Sorry for the bad English.

  has taken more time than I thought... and it's just basic examples... may be refined more...

  with more time and reflection... .but gives you the basic ideas of... read the caches of combat and transparency... etc...

  -----------

  samples
  white background... .with hide by approach
  becomes transparent... letters, Black opaque, translucent gray

  

  transparent background
  black and white letters are shown as is with no cache by approach

  

  transparent background with matte...
  now white letters serve as mask and allow the image through only the white letters

  

• How to import the .exp/XPDL/XSDL file in ALBPM Studio 5.7

  Hello
  
  Can someone tell how to import the .exp file that develop in the ALBPM Studio 6.0/Oracle 10g r3 in 5.7 ALBPM BPM. I tried but can not able to import the project as suported by ALBPM 5.7 file is <. FPR.exp >. I also tried to import XPDL/XSDL developed in 6.0 to 5.7 but may not able to do. It is important the file but the only automatic operations are in space work (all other activities such as Interactive, Grab etc. are not displayed). The code inside this automatic activities aren't there.
  
  How to import the files/file in ALBPM 5.7
  
  Kind regards
  Sidonie

  Hi Francine,.
  I expect to import a project with an old version of BPM does not work or be supported.
  Most of the products are built to be fulll, incompatible back forward.

  I recommend you go to a version of the product in - trying to maintain two adds to expenses of maintenance and support.
  In this case to migrate your processes from 5.7 to 6.0 (or even 10g) would be bearable and the best way to go.

  Rgrds,
  Ian
  .

• How to read the date and time of a file by labview information

  How to read the date and time of a file by labview information? for example, time created and updated time.

  The similar question had already spoken here (this is the old thread but still seems topical):

  http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836