How to integrate the Service Note with space webservice?

Similar Questions

• How to integrate the Java Application with OSB

  Hi, I'm a new guy with OSB and we plan to integrate the project with OSB, the exchange of existing project data type is REST JMS and NIO(Apache MINA).

  Could you any body show me how to configure the JMS/REST/NIO in OSB, and how java application call the proxy service maybe OSB?

  For example, the producer will push the message in the jms queue and s Comsumer will pull the message from the queue, java application is sufficient to bind the JDNI queue to identify the queue. But if set up in OSB, how java application to trigger the OSB proxy service to push the message in the jms queue and also how to consume?

  Thank you.

  It is certainly not necessary, because the current solution works for you.

  There may be some advantages however. OSB allows, for example, to disconnect the Server publication and the queue in the sense of identification information. OSB only could credentials to the actual queue, and the editor know only the creds to its own queue of the entry. Or to implement more complex logic that updates the latest version of the consumer - made demand to separate release dates for the producer and the consumer, who, in case of different vendors is a HUGE pain.

  OSB is the proverbial extra level of indirection that allows to solve any problem in IT. If you do not have a problem still though that obviously is not necessary a solution.

  Vlad

  http://genericparallel.com

• How to integrate the glass fish with Oracle JDeveloper application server

  Hello
  is someone's idea on... can we integrate server with Jdeveloper glass fish...
  I have to use the application server with the oracle Jdeveloper glass fish,
  If one achieve this feature before... Please suggest me the steps... How can I do this
  
  thanking you :)
  Nikhil

  Hello

  There is no support yet as server integrated into JDev Glasfish currents

  Frank

• How does integrate the Elements 9 with Lightroom?

  I use Lightroom, but wants to recover a part of the Assembly of the Elements 9 power but while staying in Lightroom.

  I've noticed in Adobe, Lightroom information. There is integration between CS5 and Lightroom but Adobe says nothing on the elements.

  How do, or only the 9 elements fit into Lightroom?

  You will be editing an RGB-converted in PSE, not the NEF image - nothing can change the NAVE, but because of the integration, LR will not need to create to TIF on the path by PSE because it uses silently ACR to open the EPS file.  When you save off PSE, you save like some other filetype that NAVE, TIF, PSD, JPG, or your choice, and LR must stack as you do with your workflow "Topaz".

  The integration will work better if you're in the same compatible version of LR and ACR, where the latest versions of each are 3.4.1 LR and ACR 6.4.1.

• How to integrate the object javascript with my plugin in c ++

  Hi all

  I have the code snippet, in a sample in the sdk, as follows:

  AVDoc avDoc = AVAppGetActiveDoc();

  {if(avDoc==null)}

  If no doc is loaded, take a message.

  strcat (str, "There is no PDF document in Acrobat.");

  }

  else {}

  If a PDF document is open, get his number of pages

  PDDoc pdDoc = AVDocGetPDDoc (avDoc);

  int numPages = PDDocGetNumPages (pdDoc);

  int cnt = 0;

  for (int p = 0; p < numPages; p ++)

  CNT = getPageNumWords (p); = > How to get number of words/sentences/paragraph count in a pdf document, because this method is javascript

  }

  I have three ideas.

  1. use AVExecuteThisJavaScript. There is a problem, because I don't see how you could get back a reply.

  2. you may use OLE as an external application (not completely sure if this will cause a blockage).

  3. use methods based on plug-ins. To get a PDWordFinder instance and check the returned number (be sure to avoid leakage of bad).

• I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

  I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

  Hello
   
   
  could a. you give us the exact error that you are experiencing?
  (b) also mention the error code, as well if it is listed.
  have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
   
  
  Let us check if the service is set to automatic.
  1. Click Start-> run and type services.msc
  2. now, locate the service named Windows Defender,
  3. double click to bring up the Properties window.
  4. set the startup type to automatic
  5. click on apply, and then click Start
  6. click OK, and then click Close window Services/Local
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help! I installed yesterday the music notes with approximately 900 MB of free space on my iPhone 8 gb 5 c. When I tried to record a song of the trial, I got a message saying that I had no space on my phone. ITunes says I have 2.7 GB on the other!

  Help! I installed yesterday the music notes with approximately 900 MB of free space on my iPhone 8 gb 5 c. When I tried to record a song of the trial, I got a message saying that I had no space on my phone. ITunes says I have 2.7 GB on the other! Anyone else had this?

  I did a full restore and got 2.9 GB of free space, but in an hour (without using phone at all) I was at 0 MB of free space. Phone is unusable!

  Anyone who has had this and what I can do about it?

  Since your not sure what the 'others' are I would recommend you to restore your iPhone. I know that you will lose all your data, but not restore from a backup of iCloud so start as a new phone. You can back up your choice and if necessary to write all your contacts on a sheet of paper and then add hide them. Depending on the severity, you want that storage

• How to integrate the police Segoe Script in a saved pdf file?

  When I save a file .psd in .PDF (with Photoshop elements 12), two of the three fonts do appear fine in the .pdf file, but not the third (Segoe Script).  I open the PDF with Adobe Reader XI.

  How to integrate the police Segoe Script in the .pdf file?   (Depending on the printer, it must be there.)

  Thank you.

  Yes you will not be able to use either the distorted text.

  (these kinds of properties do not appear in this font)

  If you want to tilt the text as it would be for the italicized text, you can use Image > transform > Skew.

• How to calibrate the PCI-6110 with NOR-DAQmx

  Hello

  I am a new user of the PCI-6110 Council tries to run the calibration using LabVIEW procedure. I look at the document "Calibration" on the page of the manuals for the Board of Directors,

  http://sine.NI.com/NIPs/nisearchservlet?nistype=psrelcon&NID=11888&lang=us&q=FQL: 28locale % 3Aen % 29 + AND + % 28phwebnt % 3 A 1081 + OR + phwebnt % 3 A 7075% 29 + AND + 28nicontenttype % 3Aproductmanual % 29 + AND + % 28docstatus % 3Acurrent % 29% 20RANK % 20nilangs: en & title = NOR + PCI-6110 + manual

  One of the first steps in the document is to call the AI_Configure command to set the input mode, beach, etc. I'm using LabVIEW 8.5 with the NOR-DAQmx software, and I can not find the command (which, in LabVIEW, seems to be "AI Config.vi") anywhere. The calibration paper was written in 2003, and I gather from Google searches (please, correct me if wrong) that this command is actually a part of NOR-DAQ traditional, who was replaced by driver OR DAQmx.

  My question is this: what is the equivalent to AI_Configure command in the latest software? Is it perhaps a subsequent document describing how to calibrate using NOR-DAQmx?

  Thanks much for any help.

  Tom McLaughlin

  Hi Tom,

  The calibration Procedure series B, E, M, S, which is also linked from this page, describes how to calibrate the PCI-6110 with NOR-DAQmx.

  Brad

• How to use the ESD document with structured templates

  Hello

  I started to learn working with SEDD. I have an existing ESD, now I'm suppose to use it to create documents. I created a new book and imported this ESD file to it. I can see all the items in the catalog of the element. But when I start to add items to the book and add a new document, the elements are turning to red. Referring to the User Guide, it is said EDD cannot be used directly and must be used with structured patterns. But I do not have these models structured with me. Can someone please tell me how to create these structured templates and how to use the ESD file with these models, and out of this problem.

  Thanks in advance.

  Although ESD exist in the form of a separate document, the only way that it can be used is when it is part of the model. As a model of structured FrameMaker, a structured model contains master pages, pages reference, character formats, paragraph formats, etc. IN ADDITION, a structured model contains a DSP. To add the EDD to your template file, or any document FrameMaker who will use it, open the template file and the file of ESD. Click anywhere in the template file, and then select file > import > element definitions. In the dialog box, select the EDD file as source and click Import. Then save the template file.

  To use the template file, open it and save it as a FrameMaker document, giving it the name you want. You can now create your structure.

  If you use a book, all documents in the book must use the same ESD. Open the template file. In the book file, select all the documents in the book. Then select file > import > element definitions. In the dialog box, select the template file and click Import. Once completed, all documents in the book have the same ESD. In addition, ESD is copied into the file of the book itself.

  You say:

  But when I start to add items to the book and add a new document, the elements are turning to red.

  It is is not clear to me what you do. While it is true that SOME elements of a book are in the book file, you cannot add a book of items in the folder (at least not as far as I know). In general, the book file, it encapsulates elements around the documents root elements in the book. You may need to update the book to get a part of the Red disappear lines. You may need to rearrange items in the structure of the book to remove the red lines.

  Hope this helps,

  Van

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• How to integrate the work of Commit in action Delete

  Hello
  In the sample the more I learn, there are some buttons to the user interface, New, Update, Delete, Commit and Rollback. When I click on the button Delete, the Entity object is removed from the Cache and pool, not actually removed from db, that after the validation button, the entity will be removed from the db indeed. But in most real world cases of use, when the user deletes a line, she always popup a "confirm". If it selects Yes, the line will be removed from db directly. I want to know how to integrate the button post button Delete?
  
  
  Bob Zhou

  Hi, you can achieve this way:

  Kind regards

  Branislav

• How to play the next song with the repetition of the same song over and over again

  How to play the next song with the repetition of the same song over and over again.

  

  In this screenshot, shot an Apple article, you can see four icons at the bottom of the screen. Look at the third argument of the right, with the two arrows going in a circle. It's the repeat function. When turned on, you can tap the icon to turn it off.

• You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  What problems are you having with the arrow? You go to Tools-> annotate-> arrow and an arrow appears. Then you can drag around the head and tail to make it to the desired location.

  

• How I set the reading aloud with a French accent?

  How I set the reading aloud with a French accent?

  Hi italo Velasques,.

  Please check if you have read aloud, option available for this slot Edit menu > Preferences > reading.

  Check if option available under voice.

  Kind regards

  Meenakshi