How to join vCenter to the domain?

Similar Questions

• Gray network ID cannot join F10 to the domain

  Well, I am a network support analyst for a living, so I know not how to attach and remove the PC and laptop computers of a domain. I have a Qosmio F10 that comes with having the BONE restored from the Original Recovery CD ROM product The network card is very good and its got an IP address, if someone can tell me why when you right-click Select Workstation properties, click on the name of the computer the network ID option is grayed out. If you click on edit the domain area is grayed out so impossible to type the domain name. Why. I uninstalled the client for MS Networks and re-installed and it's the same thing! Its driving me crazy.

  Hi Imsai

  Please contact your network administrator and believe me it can help you. As I know it is not possible to make changes if you have no right to domain administrator.

  Good luck!

• How to network Vista workaround (the domain profile) location

  If Windows Vista is joined to a domain, the network connected to the field of authentication is marked as 'the domain profile.

  Unfortunately, if there is another NIC (Interfaces virtual VMWare), Vista doesn't know where they are. Whatever you choose for these NICs is 'public' or 'private '.

  The result is that a defined group policy Firewall profile 'Domain' the problem is never used, until additional network cards have been completely disabled.

  Anyone know a workaround to classify the VMWare NICs as "field located?

  Concerning

  Severin

  Try searching for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\" network {4D36E972-E325-11CE-BFC1-08002BE10318} cards (e.g. VMnet1, VMnet 8, etc.), and by adding a REG_DWORD value called ' * NdisDeviceType ' set to 1. Then disable and re-enable the network cards. This will make disappear from "Network and sharing Center" Vista.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Use Windows authentication integrated into vSphere SSO without joining vCenter in the field?

  Hi all.

  Our freshly installed vCenter 5.5 is not attached to our domain for security reasons (not managed by the same teams).

  VM admins need to connect with their Windows credentials, though, so that, from now on, the source of identity SSO is set to 'Active Directory as an LDAP server'.

  Single sign-on does not work with this configuration, probably because he needs the source of identity must be set to 'Active Directory (Windows integrated authentication)'.

  Is it possible to get pass through authentication works without vCenter join the Windows domain?

  SSO would not work if the machine is not joined to the tourist.

  The machine must be joined to a domain (test or in-house) to work and for SINGLE sign-on to work correctly.

  Reference KB - http://kb.vmware.com/kb/2058919

• VCenter should be joined to the domain?

  Is there a reason to join vCenter in the field? I don't want Windows Server it works on but in vCenter itself? Windows Server is already part of the field. I just took the VMware class and remember it being a setting in vCenter to reach the field or something similar, but I can't. Can someone tell me where this setting is and what exactly its used for?

  See http://kb.vmware.com/kb/1021970 for more details

• steps on the computer in the domain to remove

  Hello! Can someone give me steps or info on how exactly to rename a computer on a network. for example, at work, I had to set up a pc for a user to work. already, this person has a profile and is in active directory, so now I'm a little fuzzy on what to do. I need to remove his old computer name of the domain and rename it then add it back to the field. What's a sense? I put windows xp on your new pc. Anyone with experience can give me some advice? I'm new to all this.

  Hi valley_girl1919,

  The following link gives instructions step by step how change the name of the computer and join it to the domain:
  http://support.Microsoft.com/kb/295017
  I would like to know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after logging into the domain account

  OK, it's making me nutty and I don't know what to do.

  Configuration: SB Server 2008 running domain controller.  4 client machines connected, 2 XP, 2 running Vista Ultimate SP1.  XP machines work fine (of course).  Vista machines are in the tank.
  Two Vista machines are about 2 weeks with the only changes to the installation of the factory Office, Norton 360 and printer drivers.  Both machines exhibit the same symptoms at the same time:
  (1) after the restart, each machine running Vista for 10 minutes exactly, saying "Please wait...". "before the screen"press Control-Alt-Delete.  Safe Mode boot normally.  Examine the event log, I see entries on running a startup script of some kind that took 600 seconds (10 minutes).  This of course comes from the domain controller.  What is this and how do I get rid of him?
  (2) after finally journaling, tries to connect the domain account ("domain\username") result in a "Welcome" screen... ', followed by a black screen with a mouse cursor which is mobile.  It is a permanent condition.  I let the machine sit overnight and nothing changes.  I get an occasional popup on the black screen of Norton saying it runs background tasks and that's all, so I know the machines are running.  Pressing Ctrl-alt-delete is * not * bring up the Security screen.  It doesn't do anything.
  Note that connect to a * local * account ("machinename\name") works very well.  I have a desktop, icons, everything.  I even connected locally and made a "change user" to a domain account, and now the machine is stuck again to a black screen with mobile mouse.
  Both machines have worked very well for two weeks.  When I reboot safe mode and remove the computer domain, everything works well, probably because I'm just connect to a local account again.
  I did * no. * change to group policy.  The server works with all settings by default wrt updates, etc.  I did not have any mods system to customers other than to join them to the domain.
  I searched online, and I see other people have this problem, but I can't find a definitive solution.  I tried to restart by using the last known good configuration, but I think that the system is of the opinion that the last logon was successful, which is not good.  To return to the last restore Point is not good.  Both machines has stagnated at the same time, which implies a problem across the field.
  Please don't tell me that I have to spend $200 and one day online with technical support to get an answer to this.
  Thanks in advance for any help you can provide.
  -Rob
  2)

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Thank you for visiting the website of Microsoft Windows Vista Community.  The question you have posted is related to Small Business Server and would be better suited to the Small Business Server community.  Please visit the link below to find a community that will provide the support you want.

  SBS 2008

  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Workstations do not read the domain controller

  Hello

  I am creating a test workstation to simulate the environment that exists in my workplace.

  I have a Windows Server 2003 with Active Directory is installed, it works.

  These are the IP addresses that I used:

  IP: 192.168.120.253

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.120.254

  Preferred DNS: 192.168.120.253

  Also, I have a normal Windows 7 which is connected to the domain with permissions, works correctly. Backend can read very well, and he joined the field without a hitch.

  I gave it the IP 192.168.120.50

  Now I am trying to create more than 2 servers: Web and SQL. I installed Windows Server 2003 on two of them.

  I gave them 192.168.120.70 and 192.168.120.80

  but they don't read the main server, nor will the server read them and so I can't join them to the domain.

  Counsel on this one? Thank you.

  Welcome to the community,

  Please provide details about the configuration of virtual network. How you have configured the virtual machine network (host-only, NAT,...)?

  André

• Change the wallpaper of customer connecting to the domain

  I want to change each client wallpaper in my field a cooperate photo when they connect to the domain. Pls tell me how to do it in the domain controller.

  Hi cindy,.

  Your question is outside the scope of these consumer forums. It is better suited for the IT Pro TechNet public. Please ask your question in theForum on Technet group policy. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install and update the vm on linux systems tools and how to join an esxi host in domain

  How to install and update the vm on linux systems tools and how to join an esxi host in domain

  thanq very much boss

• VCenter 5.1 does not start after joining the domain

  I have a VCenter Server 5.1 that I had to join the domain. The domain controller has died and I had to rebuild the domain from the ground controller. It is early in the generation of the environment and the user does not backup turns yet. The SQL database is on another virtual machine which I added to the domain and at least I think I have fixed the AD accounts on the SQL Server. I ping the SQL server machine vcenter server. I also have a Web server that uses the SQL Server and it works correctly. All thought that the web server uses a SQL account and not a Windows account. Having said that it's the VCenter error I get. I don't know where I can get more detailed logs. VCenter service dies as soon as I try to start it.

  Here's the log of events

  Application error event ID 1000

  Name of the failing application: vpxd.exe, version: 5.1.0.35539, time stamp: 0x514d6239

  Name of the failed module: vmacore.dll, version: 5.1.0.35539, time stamp: 0x514d5992

  Exception code: 0xc0000005 fault offset: 0x00000000000022f7 failed process id: 0xbd0

  Start time of application vulnerabilities: 0x01cefb39789687d1

  The failing application path: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe

  Path of the failing module: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vmacore.dll

  Report ID: bf5595b0-672c-11e3-958d-000c2944f450

  Just rebuilt the VCenter server, was faster than to try to fix it.

• vCenter server join to the domain after installation

  Hello

  I have a windows 2003 with sql Server 2005 in the WORKING Group on this server, I installed virtual center 2.5 now I want to migrate to vcenter 4, but first I have to join to the domain.

  Can perform the join to the domain of this server without problem?

  Thank you

  Fabio Storni

  Yes it should be no problem to joing your Windows 2003 virtual machine to the domain - this will not affect your VC server.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Unable to join u1 VCSA 6 back to the domain. Error messages are not found anywhere online.

  I was wondering if someone can help troubleshoot me SSO with a VCSA to 6u1 running. PLEEASE!  This has been updated about a week ago of 6.0 and had no problems until he decided to collapse Monday. At this time, that we had problems with our domain controllers, I don't know if it was related.

  Monday Veeam backup by using a domain account to access VCenter has stopped working. Authentication failure. Try to connect to VCenter WebClient with SSO that weI made for years also failed. Signature as root for web client has as well.

  Signature to the C++ client worked for connections without any problem, but really limited what we can do. So I spare the domain and attempted to join without success.

  I can sign into the web client with [email protected], you try to join the domain as we did before the results in "Idm client exception: error trying to join AD, code error [31], user..." " - no reference to error 31 anywhere. Yes the username in the form of [email protected]. The computer account has been recreated on the field. Connectivity to the domain controller is fine, because if I put the password wrongly, it tells me that authentication has failed. All services on the VCSA are started with the exception of the function Auto-déployer.

  I tried via SSH connected as long as root (it tells me that [email protected] has no shell access) domaine.net/opt/likewise/bin/domainjoin-cli join [email protected] translated by ERROR_GEN_FAILURE [code 0x0000001f], yet once a mistake that relevant results.

  I am unable to create beams journal via the web client or via the C++ client, I suspect because space on the VCSA which I was not able to solve. Execution of the VSAN performance monitoring seem to chew place until I turned it off, but haven't found all the resources online as to where to find them or how to remove.

  I have a snapshot that was done before I got updated to 6u1 8 days ago, but I'm afraid that everything I have done since then will crumble. This VCenter manages a VSAN production, and I can't get him off.

  Please can someone untangle me this mess? With the lack of informative error messages I don't know where to start!

  Thank you

  B

  Woohoo! I finally thought to it.

  To start with I've implemented a new VCenter server as a trial, nothing configured, just deploy the iso 6u1. I found that it was not automatically joined to the domain and has attempted to do. SAME ERROR! So the problem is not with VSphere. In recent weeks, we introduced two new DCs R2 2012 and retired from one of our 2008 R2 domain controllers. I closed the DCs 2012 and tried again with only the old DC on the network. It worked! I was able to join the VCSA test to the field, and after a reboot because the button leave available domain.

  So I she disjoint and then attempted to join the domain when running wireshark on 2008R2 domain controller's NETWORK card. Then, I grew up a DC 2012R2, waited 10 minutes or so close the 2008R2. Yet once, I ran wireshark but this time on the 2012R2 server's NETWORK card. I compare the results of a successful or not join and I saw that the 2012R2 DC has been a lack of outgoing SMB packets to the VCSA. The Server service is running on the domain controller in 2012, but the Microsoft recommendation has been to change startup srv.sys from automatic to manual on 2012 R2 server. I thought it was odd at the time, but we have changed when we put in place the new domain controllers to meet the BPA. I compared it to the registry setting on the 2008R2 domain controller. which has been set to automatic startup.

  So to allow VCSA to join the domain when you get the error 31, cancel it

  http://social.technet.Microsoft.com/wiki/contents/articles/21104.SRV-sys-should-be-set-to-start-on-demand.aspx

  on your server 2012R2 DCs if it has been applied it causes domain join failure.

  Command prompt: sc config srv = auto start

  or

  Register: HKLM:\System\CurrentControlSet\Services\srv\ from 3 to 2

  I hope this saves someone else the time it took me to understand! I guess I can cancel my request for support now...

• convert Vcenter of the Working Group to the domain

  Hi my current setup of vcenter was related to a working group, but currently I need to join to a domain; measures on how I can carry out this task; Thks for any info I'm on Vsphere 4.0

  You may have a problem with vCenter plugins which may still appoint the previous name:

  http://communities.VMware.com/thread/213995

  But if you only join to the domain and keep the same name, without doubt, everything works fine.

  André

• How to test the domain controller security policy works or not?

  How to test the domain controller security policy works or not?

  So far, I put a security policy in the domain controller security policy, however, I do not affect client computers joined to the domain controller. and so far, if I apply the domain security policy work.

  LiuAlex

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home