How to maintain pointing a button state, while it is in its current page?

Similar Questions

• How to use a radio button state to calculate a value in another field

  I produce a registration form that uses radio buttons to specify an accommodation meals and requirements for individual registrants - separate option buttons select the meal (YES or NO) plan and the type of accommodation (NO THANKS, A, B or D).

  I want to ask the State of these boxes to option and, if selected (set), calculate the amount to pay for registration in the related areas of subtotal ( Plan -meals and accommodation).  In other words, based on the costs of $ for YES, A, B and D on a per Member basis, I want to enter an amount of $ in the subtotal fields 'meal Plan' and 'accommodation'.  In the ABSENCE or NO THANKS is selected, no calculation is necessary.

  The form attached, if a given registrant (for example Reg01) chooses to include a meal plan (selected option button M01-Y ), then in the numMEAL subtotal field must increment of $80.  Similarly, if Reg01 wants to book a double room (R01-D) I want to add $268 for the subtotal numROOM field.  It goes without saying that the numMEAL and numROOM fields must reflect the cumulative amount based on the requirements of all listed registered (Reg01 via Reg05)

  Example:  I want to use a FormCalc calculation something like... (If M01 - Y is set then $80) + (if M01 - Y is set then $80) + etc ... to calculate the value of the field numMEAL and any other equivalent expression for the numROOM field.

  Also (but don't feel you have to answer), in the design-time view how to configure to display radio button selections No. or NO THANKS as the default selection (set) such as the other buttons in the PLAN of FOOD groups and the TYPE of ROOM are not selected (not set) - (I think that would correct indications of error that I see).  I managed to configure this radio button state initial for groups TYPE CITIZENSHIP and PAYMENT of the form but can't seem to do for groups of PLAN of MEALS and the TYPE of ROOM .

  Thanks in advance for your help.

  I think this is what you wanted... .view attachment. The problem with multiple selections in Design view is cause-in the name. I changed it to the rooms because it is to be interpreted as a subtraction. You must change them in meal option buttons as well and that will clear up the design problem you mentioned.

  To get the room to add correctly, I changed the value for the room price. Then on the event rentals field calculate I simply add all room radioButtonList. The calculate event fires whenever a room is changed. For meals, I put the code on the RadioButtonList to every meal (just to show you a different technique). You could od it exactly the same way as the rooms but it is up to you.

  Paul

• How to maintain direct links in Acrobat while making the rest of the non editable PDF?

  I want to convert Word docx to PDF and to maintain hyperlinks while not allowing people NOT edit images and other text.
  Is this possible to do with Acrobat?

  I can't find a way to do it.

  Thank you.

  Of course, you can apply a security policy that prevents the installation, allowing links to be clickable (in fact, you can not disable it).

• How do I put the buttons at the top and bottom of a page

  Hello

  I have a requirement that each of the 4 buttons be placed at the top of the shape and the bottom of the form as well.  As I tried, I could not find a way to do it.  I use APEX 4.2.2.

  The layout of the page is / < should be > as follows:

  Area of the header

  -various Articles

  < buttons should go here >

  Region 1

  -various Articles

  Region 2

  -various Articles

  Region 3

  -various Articles

  < buttons should also go here >

  Currently I have buttons in a region called the buttons after the region 3.  I tried to place 1-3 areas in my region of buttons (buttons has been defined as their parent region) and then set the property position button up and down, but that just gave me 2 sets of buttons with nothing between them (regions 1-3 should be between them).  The point of view of each of these regions is body of model Page (3)

  So, how can I address my page have two sets of buttons, as shown above?  I know there is a much better way than to create a new set of buttons with dynamic here of actions/process/validations/etc.

  Thank you very much for your help!

  Jason.

  EDIT: The theme has been applied to this app is a custom theme that was created by the theme of Cloud applications.

  jason02 wrote:

  Cloud Apps is theme 101.  My area of container using the model 'Button region Untitled' and the HTML in the definition is:

  #CLOSE # PREVIOUS # ##DELETE NEXT ##EDIT ##CHANGE # CREATE # CREATE2 # EXPAND ##COPY # HELP #.

  #BODY #.

  This is going to sound strange because you want to display buttons, but the region without title button model is not appropriate for what you're trying to do (it is designed to display buttons in positions defined by the chains of substitution in support of button cell). Stranger still, in a theme derived from issue 20, the best model in the region for a container's region without buttons and title. That this legacy theme uses HTML tables-based layout, the jQuery selector that is required in the JavaScript code is more complex:

  $('#container_body td.t20RegionBody:first')
    .append($('#container_body td.t20RegionBody:first table:first'))
  

• How can I remove a button junk, seemingly permanent of my quiz results page that appears only in the mode to publish?

  When I publish my project, on the results of the quiz at the end page there is a button "continue". It does not appear in my project in edit mode, play or preview. I wouldn't mind so much and might be prepared to ignore, except that it is biased, oversized and distorted (so it looks unprofessional). I can't find the obvious culprits in quiz settings properties or properties. Anyone any ideas as to how this key came to appear in published mode and, more important still, how get rid of?

  I hope it works, but when you re-read the thread, you'll see that I would never drag the button off the slide to score because of its importance. You can make invisible on the slide by changing its fill and stroke. And make very tiny.

• How can I make a button to be interactive so when its checked or clicked, the next tab fields become required field?

  I'm trying to create a form that contains a button to select a credit card or check.  When someone chooses the credit card, I need to become a required credit card information fields.  In the contrary case, it they select check, all the fields of credit card (number, exp. date, security code...) to be non-mandatory field.

  Why use a button. If you have a checkbox or a radio button, you can use the available actions for one of these fields to adjust the properties of the fields depending on what widget in the Group has been selected that can be to make the required, visible and required fields and then reset/clear the other group of fields, do so in read-only and disabled the requirement.

• How to remove photos from the desktop while maintaining in the Photoshop Elements Organizer?

  How to remove photos from the desktop while maintaining in the Photoshop Elements Organizer?  My office is now crowded with the photos that I can't recycle because they then 'not found."  The image, but not the data is always in the Organizer, but I imagine that it would disappear once I have stop and restart my laptop.  I want to clear my desktop, but keep the photos!

  annab72712181 wrote:

  OK, that's a lot of sense.  But I still don't know what I have to do them down the office without losing them.

  If you move from your Explorer or finder in a given folder, you will not lose them and they will disappear from your desktop.

  If you want to use the Organizer to keep track of your photos in the catalog, use the Organizer, not the Explorer / finder to move them to another folder on the desktop.

• How can I change the 'Submit' button States in muse adobe?

  How can I change the 'Submit' button States in muse adobe? Currently, I can only change the color, text, and the outline of the button, but I can't customize it as I have the other buttons in the tool.

  Use your images as a background the button fill

• The button States - Plus, upwards and downwards.  How to show?

  This morning, I attended a Webinar from our Adobe friends Bangalore.  It was a good presentation and made me think of the button States. The instructor said that you need to create 3 States of the button as separate the 3 images (no Flash) as (1) [buttonx] _up.png, (2) [buttonx] _over.png and (3) [buttonx] _down.png.  She said to put all 3 in your library, but only pointing to [buttonx] _up.png in the properties panel. She said that Cp would have automatically come back on the other 2 States. I tried a preview and do not have the States to show. Admittedly, I have not yet published.  Someone out there with experience with the States of the button. Am I missing something?  I would also like to build files in the components Panel (as one of the buttons - is an improvement to ask?)

  You may have misunderstood what the person of Adobe, or they may have used the wrong word wrong.

  You do not put the files button in the Captivate library. You add them to the Gallery button to:

  C:\Program Files\Adobe\Adobe Captivate 5\Gallery\Buttons

  or on 64-bit computers to:

  C:\Program Files (x 86) \Adobe\Adobe Captivate 5\Gallery\Buttons

  Then, they appear classified among the buttons available in your image buttons drop down.  Captivate shows only one of the images but uses all three.

• How to add a button state is 'disabled '?

  I have a Navigation Menu of the main FLASH Web Site that has (7) buttons (BUTTON real objects created in Flash - no MovieClips) that undertake different HTML pages. Everything works perfect (rollover States, links, etc.), but I can't understand how to write code AS3.0 to create a State "button disabled? I've seen a few code snippets that talk about this, if you use MovieClips, but how can I do a 'Button' disable after clicking on?

  I guess I would need a variable that would capture and store the last button clicked?

  Any help would be greatly appreciated that I keep coming to this same issue.

  Here is my current code that makes the buttons work:

  var mainButtons:Array = new Array(mainBtn0,mainBtn1,mainBtn2,mainBtn3,mainBtn4,mainBtn5,mainBtn6);

  var mainButtonsURLs:Array = new Array ("http://www.thekentcompanies.com/Pages/index.html","http://www.thekentcompanies.com/Pages/WhatsNew.html","http://www.thekentcompanies.com/Pages/Facebook.html","http://www.thekentcompanies.com/Pages/Golf.html","http://www.thekentcompanies.com/Pages/Motorsports.html","https://thekentcompanies.tms.hrdepartment.com/cgi-bin/a/searchjobs_quick.cgi","http://www.thekentcompanies.com/Pages/Register.html" ");

  function loadMainPageToFrame(event:MouseEvent):void {}

  var count: Number = mainButtons.length;

  var: index number;

  for (var i: Number = 0; i < count; i ++) {}

  { if (event.target.name == {mainButtons [i] .name)}

  var myURL:URLRequest = new URLRequest (mainButtonsURLs [i]);

  navigateToURL (myURL, "_self");

  }

  }

  }

  for (var i: Number = 0; i < mainButtons.length; i ++) {}

  mainButtons [i] .addEventListener (MouseEvent.CLICK, loadMainPageToFrame);

  .mouseChildren mainButtons [i] = false;

  }

  This is a link to a source file, so at most, you will see a window asking what you want to do with it.  You may need to right click to get an option to save the target file.

• How to maintain the life of your printer

  It seems more common that everyone feared how to maintain the service life of the cartridges from the printer itself.  As many variations of parameters and environment may play a role in how long your ink will actually last. A more official document can be found here about the science behind the ink, how to use it and how to make it last longer.  I will get into issues that affect the overall performance and life cycle of the printer.  I recommend to use the Startup ink supplied with the printer until he is gone because it contains chemicals of this condition and prolong the life of the print head for future use.

  I urge users to keep the printer connected directly to a wall outlet (namely for troubleshooting purposes). As with all electronics that are showing signs of failure, you can start with the power source if one really wants to follow the flow of a schema logic.  By eliminating the devices that can not to themselves, you removed a piece more equipment from the equation.  A more specific reason would be due to electromagnetic interference.  Wireless devices are vulnerable to interference with symptoms like error messages of false, lines in digital images, strange noises and frequent jams.

  Surge protectors must regulate the power distributed to each connected device.  It is possible that the printer is not the right amount of power and may fail as the printer power problems in hibernation mode with more features like duplex printing, it is impossible to recover , cable USB not detected and the light on the module displaying a yellow instead of green.  If the module and the surge protector are fighting for the control, it can cause a variety of problems that could easily be repaired by plugging the printer directly into a wall outlet.

  The next major issue many users face is the print head.  It is as well as the maintenance of ink as well.  It is important to clean the print head and the best way to do that is to use it and keep the good ink in the printer.  Over time, the chemicals can not even begin to change or develop air bubbles in the cartridge.  Not to mention, ink (well pigmented) still contains fluids that can evaporate if the printer is not rooted and off properly when not in service.  Of course, some of the processes of preparation printer used when the power of the printer can use very valuable ink, but, on the other hand, it's good for the life of the printhead to leave these processes to perform according to its specifications.

  The print head is composed of tiny nozzles and parts fragile this is why it is also one of the most expensive areas of the printer.  Most printers contain many self-cleaning utilities which is recommended to regularly (I suggest at least once a month) to help keep the printhead clogging and causing stains on the sheet itself. There are a number of unconventional methods to try once the printhead has dried up in fact, but when you try these steps you may totally break the part.

  Dust and smoke particles can also cause problems with the print head, but the printer entirely.  It is often the main killer of electronics as well as hairs and animal dander, dirt from moisture and humidity, paper for printer cheap and sand.  The air is full of impurities and really can not be prevented.  Preventive measures can be taken with dehumidifiers and a uniform cleaning, but over time, there is no real way to prevent it from happening.  Dust and air blowers have been known to cause not only solders to separate but may deposit particles of dust in places that could actually damage the printer entirely.  Instead, a favorite device is known as an empty computer.  It helps to remove the fine dust in the sense just that pushing forward into the printer.

  Paper jams also cause many more problems if is not removed correctly. HP recommends pulling the paper in the direction of the gears.  When removing a paper jam, you won't hear a grinding because it leads finally to the teeth are stripped like a screw, but simply once fully detach one of these devices. It is virtually impossible to fix a paper roll or similar because all parts are connected to each other and not sold in parts stores.

  At the back of most HP printers, you can remove the rear access door or duplexer (double-sided printing device) and easily join the paper in this way.  If you see the paper jam is located next to the Board, and then remove the piece from the back and take the paper with both hands to apply a gentle tug of same, and you should have no problem in removing the paper in this way.

  Paper quality can play a large role in the life of your printer.  Cheap paper can free of paper dust up into the gears and small machinery within the printer and are very difficult to clean.  Print incorrect parameters and issues related to food can cause the paper to stay in places that are not as easy to do.  In this case, remove the paper as long as slowly and patiently as possible to avoid them ripping out pages in places like between the wheels under the printhead and also causing error messages that will not disappear.  When troubleshooting printers, patience and troubleshooting documents will also help you keep your printer running longer.

  The printer doesn't like to not be put off by anything other than the power button.  I have always recommended the printer off when not in use (at least for long periods of time) to help keep the ink dry and high printing quality.  The reason why it is not recommended is because people will be unplugging the printer, while he is doing something and the negative effects that this might have some alignment problems serious, burn the computer chips and components similar to that in computers, fake error messages and possibly bricking of the printer if done at the wrong time.  Resets hard are great troubleshooting steps, but the abuse of this feature can result in irreparable damage.

  Fanning the paper before put you in the status bar is a good practice. About 25 sheets are perfect, because an overload of the status bar may also cause paper jams.  The paper guides of setting and selecting the appropriate paper type will put the science behind these settings wisely. Don't put paper in the tray while the printer is printing, crumpled, dirty, or coexist paper types and paper clips are all things to avoid.

  Software and communication issues deserve a section all to themselves.  The measures to prevent problems of this kind could not covered in a post, let alone a chapter.  The best thing to do to increase the performance and connectivity is to set a static IP address in the URL embedded in the printer if the printer is set up on a network (steps to do this are different from the printer to the printer).  USB cables must not be more than 3 meters long and kept in good condition as well as the power supply cord.  Keep your valuables out of reach of children and buy an extended service plan for many reasons.  You can enjoy all the services offered with a service plan in the case of a defective printer or simple product questions.  Keep the firmware up-to-date and to read reviews before you buy any electronic device.

  After reading this, I'm sure you're aware, that's all common sense, but at the time where you do not consider one of these suggestions you think back and wonder "if I had taken 10 seconds longer to avoid that I wouldn't spend 2 hours more set.»  Mistakes are made when frustrations and lack of care.  These are not delicate machines that deserving the highest shelf in the bathroom, but an understanding must be met, that once it's broken this avoidable?

  Troubleshooting of many documents can be found at www.hp.com/support.  They must be followed in order to avoid the repetition of the steps, steps unnecessary and causing more frustration.

• How to create an image button...

  Tools: Adobe Photoshop CS5

  Master level: very novice

  Goal: Creat Button for a website

  Environment: Windows Vista

  Problem: the following images are buttons was designd. An image is in the normal state, while the other button is in State rollver. I want to create an image of indetical with the same properties for example (size, font type, font size, background color of color police) called "intuitive healer". I don't know how to imitate the fonts and background colors.

  normal status of a button

  button rollover

  Intuitive healer? normal

  Intuitive healer? Rollover

  I'm curious to know how to create a button with the exact "look and feel" design and writing on this healer Inutive

  Make my day

  the guy looks like both a new Roman font.  If you follow the tutorial below, it sets out nicely. you simply omit the gradient and effects that they do in the tutorial, to match the one you want on it. It will associate Dreamweaver and Photoshop.

  Flight path Imaging:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WS18F9E180-3241-4891-ACC8-82C9DFB254F5a.htm l

  Watch this video:

  http://www.YouTube.com/watch?v=_pVfBtW-Tuq

  -good luck!

  Janelle

• How to maintain information in the ReelTime Toshiba that I keep on the toolbar?

  I hope I'm in the right place :-)

  I want to understand for once and for all, how to maintain information in the ReelTime Toshiba that I keep on my toolbar.

  If photos or documents on my dasktop: when I send the documents that they are lost of ReelTime and he said: "the file for this shortcut no longer exists."

  How can I avoid that because what is the point of ReelTime otherwise?
  Thank you.

  Hello

  Toshiba Reeltime is a free application, showing you a Visual timeline of your files recently accessed using graphic thumbnails like the images, so you can access your files more quickly.

  The Reeltime makes it easy to search for files up to recently used documents 5000 in a timeline. The presentation will be in chronological order reversed, so the most recently used files appears first. Filters allow you to limit the search to photos, text documents or other types.

  > If photos or documents on my dasktop: when I send the documents that they are lost of ReelTime and he said: "the file for this shortcut no longer exists."

  This occurs because of the file has changed

• Problem: The button States works perfectly in preview mode; It does not work when published through the source of catalyst for business.

  I tried every way I know to create a button States in Adobe Muse CC 2015.  It works perfectly in preview mode, but it does not work effectively when published on a web site using the Business Catalyst (filename.businesscatalyst.com) process.  The problem, in my view, is that the text used in the button does not accept state changes.  I tried every workaround that I think might work, but nothing seems to work.  I even deleted the Business Catalyst site and then he came again, but it does not work.  Any information on how to fix this problem would be appreciated.

  I think I found my problem.  My original links have been on the "master" page  When I placed a link on a page of content object, Business Catalyst was able to translate the code correctly.  It is a disappointment because I need to duplicate objects on the pages, but at least it works.

• How to transfer values to the popup while the bean in application scope?

  Hi all

  I use JDeveloper 11.1.1.4

  My scenario is that I have a < af:popup > with a component of < af:outputText >.

  I need pass values of output text dynamically according to the scenarios.

  My grain of support is application scope . So I'm not able to pass values using get and methods.

  My Design as,

  < af:popup id = "p1" contentDelivery = "lazyUncached" >

  < af:outputText value = "#{managedBean.getDynamicText}" id = "ot1" / > "

  < / af:popup >

  Now I run the application I'm not get all values in text during debugging output, I am able to set the value, but it didn't reflect on the page.

  How to transfer values to the popup while the bean in application scope?

  Thank you...

  At the bean, why don't you set the value to a variable pageflowscope and point the outputtext popup to the pageflowscope variable?

  () .getpageflowscope, set AdfFacesContext.getCurrentInstance ("nomvar", value);

  
  

  Thank you

  Alisson