How to make a conditional field read-only

Similar Questions

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• How to make MessageTextInput as a field read-only.

  Hello
  
  I want to MessageTextInput as a read only field.
  
  OAMessageTextInputBean textBoxName = (OAMessageTextInputBean) webBean.findChildRecursive ("MytextField");
  textBoxName.setReadOnly (true);
  
  When I use the above code it won't page field.
  
  Same thing is happening as he tried to use readonly = True property at design time.
  
  could anyone help on this?
  
  Thanks in advance
  Yohanna Pachanekar

  Hello

  When you make a text input read only it will be hidden, so you can set as disabled using setdisabled (true).

  Thank you
  Gaurav Sharma

• How to fill a field read-only based on selections from 2 DDlists?

  Follow-up question:

  http://forums.Adobe.com/message/2417876#2417876

  I have 2 drop-down lists.  'Department' and 'unit '.

  The selection in DDlist 'Department' creates a single list in DDlist 'unit '.

  I select the appropriate of these two DDlists elements.

  When I do this, I want the text read-only 'NameOnIDBadge' field is filled with a predefined entry.

  Example:

  In DDlist "Department", select the item «Finance & Administration»

  In DDlist 'Unit', select the 'Food Service' item in the list that appears

  THEN:

  In the text field read-only 'NameOnIDBadge' of the following built-in read-only text appears: "contract food serv.»

  (Thanks to Paul, I already know how to do selection in DDlist 'Department' affect the selection list in DDlist 'Unit')

  "but I don't know how to make the choice of these two DDlists to create a new entry in a text field).

  I have attached a mock-up of the file that I work with...

  If ((firstDDList.rawValue="Whatever") & (secondDDList.rawValue = 'Whatever'))

  yourTextBox.rawValue = "the text on the right"

  This code would go under the second output of DDList event, replace the code I put in there to add the control to the first DDList

• Simple question - how to make a readonly field

  Simple question - how to make a readonly field

  Hi DougBlincoe!

  I think you're looking for this:

  1. create the element. See "creating a Page level item.

  2. navigate to the appropriate page definition:

  Go to the Home Page of the database.

  Click the icon of the Application Builder.

  Select an application.

  Select a page.

  The definition of Page appears.

  3. under items, select the name of the element.

  The attributes for the element page.

  4. to display an item under certain conditions:

  Scroll up to Conditions.

  Make a selection in the list Type of Condition.

  Enter an expression in the fields provided.

  * 5. To make an element read-only: *.

  Scroll to display playback settings.

  Make a selection in the playlist only Type of Condition.

  Enter an expression in the fields provided.

  Click on apply changes.

  Here, you will get more information about this:

  # Create the item. See ["Creating a level of Page element" | http://download.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/bldapp.htm#BCEFHBHG].
  # Navigate to the appropriate page definition:
  # Go to the Home Page of the database.
  # Click the icon of the Application Builder.
  # Select an application.
  # Select a page. ------------------Definition of Page appears.
  # Under items, select the name of the element. ------------------Page attributes for the element.
  # To display an item under certain conditions:
  # Conditions scroll.
  # Make a selection in the list Type of Condition.
  # Enter an expression in the fields provided.
  # To make a read-only element:
  # Scroll the display reading settings.
  # Make a selection in the playlist only Type of Condition.
  # Enter an expression in the fields provided.
  # Click on apply changes.

  Here, you can read more information about this:

  http://download.Oracle.com/docs/CD/B25329_01/doc/AppDev.102/b25309/bldapp.htm#sthref805

  I hope this helps!

• Marking of fields read-only when signed - unable to untick the box

  Hi people,

  I use Adobe Acrobat Pro XI.

  I have a form with Signature fields that have been set to make some fields read-only once the signature field is signed. I can bring up the Properties window with the list of fields to choose from and can't seem to "Select all" and "Uncheck all" using the button, but can't check or uncheck the individual fields. When I click on a field of what I pointed out but I can not "check" it.

  No idea why this would be?

  Thank you.

  Click on slightly outside and to the left of the box to select/deselect the.

• How can I change the attributes read-only or system files?

  How can I change the attributes read-only or system files?

  To view or to remove the read-only or system attributes, use the Attrib command at a command prompt:

  1. click the Start button, type cmd in the search box and press ENTER.

  2. to view the syntax for the Attrib command, Type attrib------? at the command prompt.

  WARNING: If you remove the read-only or a file system attribute, it may seem like a regular folder and some customizations may be lost. For example, Windows customizes the Fonts folder and provides a special folder view that allows you to hide variations, such as bold and italics. It also allows you to change the display settings of the file in a way that is specific to fonts. If you remove the read-only attributes and the Fonts folder system, these custom display settings not available. For folders that you have customized by using the tab, customize the folder properties dialog box, the folder icon and other other customizations may be lost when you remove the read-only attribute.

  If a program cannot save files to a folder with read-only, such as My Documents, change the read-only to the system attribute by using the Attrib command at a command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------.

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command: attrib - r + s c:\test

  Be aware that some programs may not work correctly with folders for which the read-only attribute and the system attribute are granted. You can use the following command to remove these attributes:

  attrib - r-s c:\test

• How to make a page QML figurentsur only the first launch

  How to make a qml page appears only on the first time the application is started?

  I need to create a tabbed pane and the number of tabs depends on n the input from the user to whom it provides the first launch. How to make this happen?

  You can use QSettings to store parameters.

  Create two main qmls (mainHasInput.qml and mainHasNoInput.qml). When the user runs your application for the first time, load mainHasNoInput.qml. If the user enters the input values correct, who writes in your QSettings. The next time that the launch of the app, you check if a setting has been stored in your QSettings. If not, show your mainHasNoInput.qml, if yes, see the mainHasInput.qml (which is your main 'normal' screen)

  for an example how to use QSettings, see https://developer.blackberry.com/native/sampleapps/ -> 'persistent objects '.

• How to make uneditable Date field in ADF

  Hello

  I use Jdev 11.1.1.7.1.

  In the fragment, I added the DATE of the ENTRY component. How to make uneditable date field. He should just take the input value of the grille.

  

  Kindly advice me.

  Thank you

  Swathi

  Your date. MinValue must be like this:

• The exact text of the text field to another field read-only

  Is there a way to display the string of exact text in the field of text within other text fields read-only?

  For example. I have fields of name on the first page and I have the same names mentioned in the other pages, but want to fill the other pages with the text name of the 1st page.

  
  Options tab > Default value doesn't seem to work, so maybe I can use calculate tab > simplified field notation.

  I have a domain called "Client_1_Name_Cover" and "Client_2_Name_Cover", so name to bind these two text fields only reading on other pages.

  You can use the validation script custom following in each of the two fields of name on the first page:

  Copy the value of this field in the field read-only

  getField("Client_1_Name_Readonly").value = event.value;

  but you must replace 'Client_1_Name_Readonly' with the actual name of the field read-only.

• I'd do the signature field read only until something is entered in the required fields.

  I'd do the signature field read only until something is entered in the required fields.

  Attached a sample file that has two text fields and field of signature, the signature field allows only when certain values are typed in two text fields.

  Steps to achieve this:

  (1) disable the signature field when the form is loaded

  (2) to activate when the two text fields values are not null

  Santosh-

• Text field & & read-only attribute

  Hello everyone,
  
  I have a text field with the read only attribute is on, I need to activate only the Back Space key.
  
  If someone has an idea to do, please tell me.
  
  Thank you and best regards,
  OLA

  If you require a read-only column, only to be read-only other characters than the BACKSPACE key (deletion)? Don't you see that this would NOT be a field read-only? You need a piece of JavaScript to reject all keys but this key when you are in this text box.

  Thank you

  Tony Miller
  Webster, TX

  If vegetable oil is made from vegetables, then what is baby oil?

  If you answer this question, please mark the thread as closed and give points where won...

• How to make a text field repeat several times?

  I have created a form with the name of a client in it - and the name is repeated at the top of each page.  How to make a text field repeat several times? Thank you!

  Make sure that all fields have the same name (LastName FirstName, MiddleName,), then set the binding in the overall binding tab.

  Paul

• How to make a required field in OAFramework

  How to make a required field in OAFramework when running? Please explain in detail if possible.
  
  Thank you
  Kumar

  Get the handle to the bean by using the following Code

  Bean = webBean.findIndexedChildRecursive ("");
  If (bean! = null & )
  {
  bean.setRequired (true);
  }

• How to do a bunch of fields read only value-based

  IM using jdev 12.1.2.

  I have a fragment with a few dozen jsff fields. I need to make these read-only or editable fields based on a value. I know how to do this for each field, but I was hoping there was a way to do this for each of them with a single property. For instance, all the fields are in a panelgrouplayout or a panelformlayout can I set a property on this provision which will set then all areas reporting to him read-only. I was just trying not to put the property read-only on each field of monkey.

  There is none of these goods or componentwhich allows you to do. All you can do is to set the readonly property of each field to the same property (bean or pagedef) and ppr the container so that the components are updated.

  Or you use a bean method that sets all the fields editiable readonly properties in a contianer orf true false. It would save that you set the property for each field.

  Timo