How to make a paper with some boxes to fill required for me to sign, and then some other boxes needed for the next person to sign. I want the boxes I've filled to be locked the next person.

Similar Questions

• How to make a text with autosuggestion box?

  I want to have a text box on the front panel that has a limited number of suggestions, how Google search.

  The situation: we have a bunch of parts that we sell. So, if that someone starts to type in the box, 'AE '; the drop-down list of autosuggestion then shows our parts with this text: "AEF1355, AES5135, AEN6425," etc. That's what we want. And no, this text box will have nothing to do with the block diagram.

  Thanks in advance!

  -Michael

  Ah, now you ask you a different question, which is "How can I load a list of strings with a database in a table of LabVIEW?" You could write code to query the database; You can export the list of data in a text file and load which in your LabVIEW program; you could hire an intern to retype the whole list in a constant matrix. A lot of options, but the information given you as much as I can't give you a more detailed answer.

• Roll on the text occasionally comment on erratic results, for example, first highlighted word and then no other product even if the mouse has not been published.  How can I fix it?

  I have Acrobat Pro DC and Windows 10.  When you try to make editing comments, I find almost impossible to get the words marked (by rolling on it with the mouse button).  The blue highlight climbs around the word to Word or closed unexpectedly after rolling on a single word, even if the mouse button was released.

  In addition, now that the strike and replacement tool has been eliminated, you are supposed to perform the same operation on the text to replace and, once the text highlighted blue, simply start typing the new text.  It works not.  After finally getting the right text marked, I start typing, and nothing happens.  I might have to select a tool (for example, strike-out), use and remove the strike-out, before the operation crossed out - replace works again.

  I have used earlier versions of Acrobat Pro (on Vista) without such problems.

  The problem I described with text selection was not with Acrobat, but rather with a failing wireless mouse.  Replacing the mouse seems to have resolved.  See erratic mouse, by selecting the problem of text - Logitech Forums

• In Windows Live Movie Maker, how to make a subtitle with the inner different font sizes?

  How to make a subtitle with different font sizes, as in the old Windows Movie Maker?

  I want to produce an effect video, like MTV clips that fade in and out for video (not before or after the video). It of about what I want to produce and could not because the new WLMM seems to have this deleted title feature.

  My song (large)
  Composer (small fonts)

  I want that this block of text fade in and out for my video. Is there a way to do this? Otherwise I would feel obliged to go back to the old WMM.

  FWIW... going back to an older version of Movie Maker
  Maybe the answer. You need to restart your
  because the Live Movie Maker WLMP project project files
  would be not compatible.

  No guarantee but the next for an installable download
  version of Vista Movie Maker 6 may be worth a try

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Also, Movie Maker 2.6 will work on Windows 7:

  Windows Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• How to uninstall vista delux home system, and then reinstall system without losing all the programs, files, etc. ?

  How to uninstall vista delux home system, and then reinstall system without losing all the programs, files?

  Hello

  You cannot do a clean install, which is what you hear in your question, and maintain programs

  programs will have to be reinstalled from the original media

  and you will need to back up your files:

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  ___________________________________________________

  You can make a good repair facility

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• How can I get a list of jobs that are planned for the days of the future

  How can I get a list of jobs that are planned for the days of the future?

  In a previous article, I found a query that lists the scheduled tasks that are already running. Can I get a similar request for the future days which is compiled?

  Hi sreedevir,

  SELECT jobmst.jobmst_prntname, jobmst.jobmst_name, jobrun.*

  FROM jobrun JOIN jobmst ON jobmst.jobmst_id = jobrun.jobmst_id -joining tables jobmst and jobrun

  WHERE jobrun_proddt > = dateadd (dd, 1, datediff (dd, getdate())) 0, -future dates

  AND jobmst.jobmst_type = 2 -given jobs (and not groups)

  ORDER BY 1, 2 -Sort by name of the parent, then by task name

  Feel free to make any changes to your reporting needs

  ARO

  The Derrick

• How to set remote spaced further icon to display more text for the name below?

  Windows 7 desktop has many icons with similar names. I want that name under the icon. How to set remote spaced further icon to display more text for the name below?

  Right-click on the desktop and select Personalize.

  Select the color of the window

  Select the appearance settings advanced.

  Select the drop down next to the element

  Go down and select icon spacing (Vertical)

  change spacing next to size according to the needs.

• I need an explanation of how check if my computer meets system requirements for the software.

  I can find the list of the requirements for the new software, but I don't know if my computer meets all of them. Some things are obvious, but others I do not understand. I was hoping someone could explain or direct me to an explanation of how to check if my computer is consistent with these requirements (beyond the obvious check in the about this mac).

  If try you to Google with these keywords "CC / - Adobe technical specification" regardless of the product, you will be able to find the system requirements of the software.

  System requirements | Creative cloud

  Concerning

  Stéphane

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• How to convert an apple store gift card to buy apps for the iphone?

  How to convert an apple store gift card to buy apps for the iphone?

  Try to buy a gift card iTunes Store with her. Apart from that, you can't.

  (140402)

• When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

  When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

  I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?

  In version10.1.5 how I would break down a large PDF file and then save each page which is the biggest file?

  If you mean Adobe Reader 10.1.5 (you tell what you have) then you can't. This would require the full version of Acrobat.