How to make the recovery of photoshop files?

Similar Questions

• How to make the recovery for vpcl231fx cd

  I want to restart my pc to factory settings and don't know how to do the recovery partition recovery cd. If anyone can help. Thank you

  There are two ways to recover your computer system: the recovery Partition and recovery disks.

  Where you can create a set of recovery discs before the upgrade? If this isn't the case, then you can try to restore the original Windows 7 operating system and all the software that came from the original factory configuration by accessing the recovery Partition. The recovery Partition are accessible by turn on/off the device with the ASSIST button instead of the power button.

  - Press the ASSIST button when your computer is off to launch VAIO Care Rescue.
  If the language selection window, select the desired language, and then click OK.
  - Click Start the Recovery Wizard. To make the custom recovery, select Tools, and then click Start the wizard advanced recovery.
  - Follow the on-screen instructions.

  If you cannot start with recovery options, it means only that delete you the recovery partition when you upgraded your operating system. If this is the case, you will need to buy recovery disks to restore the original software.

  You can buy recovery disks of Sony parts and accessories or parts distributor authorized Sony

  If my post answered your question, please mark it as "accept as a Solution.

• How to make the recovery of the system on Lenovo z580

  Hello

  Can someone explain how to do a factory reset on the Lenovo Z580.

  I've been using laptops from sony, and it's my first lenovo...

  Thank you.

  Follow these steps
  1 backup all your data in the C drive.
  2. shut down the computer.
  3. remove all external media except the charger.
  4. after removing, press the small button with a "top-down next to the switch.
  5. the normal BIOS screen would occur and then the "windows loading files" show. Wait, it starts.
  6. after starting, click option 2, that says onekey recovery.
  7. check the initial backup and click Next. Two guests would occur. Respond accordingly.
  8. now recovery would begin
  That's how the reset is made.

• How to make the information in configuration file of Windows 7 host environment virtual xp?

  I recently installed virtual PC and virtual XP on my new machine windows 7 so that I can run some visual basic 6.0 programs there. I have some files of actual data on the c: drive of the windows computer 7 which visual basic programs are unable to find. How can I contact configuration of the file information in the enviironment virtual xp? Are there good reference books or articles about this kind of thing?

  Dick to Dallas

  Hey Dick,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you have a problem with access to some files when using Windows XP Mode.
   
   
  Don't worry; We are here to help and guide you in the right direction.

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• How to make the bin-debug HTML file compatible with Firefox

  When I build the program, it creates this HTML file in the bin-debug output folder.  The file works fine with Internet Explorer, but when I use Firefox, it's just a blank white page.  In any case so that it works with IE and Firefox?

  Here is the code above, if you want just a shortcut:

        
  
        
  
     
        
  Alternative content
      
  
  
  
  
  

• I have photoshop 6 and CC Photoshop on my Mac. How can I make the default CC Photoshop to open when I double click on an image?

  I have photoshop 6 and CC Photoshop on my Mac. How can I make the default CC Photoshop to open when I double click on an image?

  Right-click on an image file,

  Info,

  Open with:

  Change the file Associations in OS X Mavericks - YouTube

• How to remove the recovery disc files D?

  Original title: drive D

  How to remove the recovery disc files D?

  Hello
  
  It is not recommended to delete the files in the recovery partition.  Recovery partition contains the Windows information to retrieve the computer crashing. I would ask you to contact the manufacturer of the computer on it.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New to i Mac, how to make the photos to import into Photoshop default?

  New to i Mac, how to make the photos to import into Photoshop default?

  Hi Johnv,

  Please visit the following link: How to Photoshop Your Default Image Editor in Mac OS X

  Let me know if it helps.

  Kind regards

  Tanuj

• How to make the black background of my photo in Photoshop CS6?

  How to make the black background of my photo in Photoshop CS6?

  Hello there-

  There are several ways to go about this. Without a more precise description on the photo you use, I've provided a few links:

  Using the quick selection tool:

  Magic Wand tool:

  Others:

  Please let us know of other issues:

  Janelle

• How to make the blue grid? PDF file at this link...

  How to make the blue background of the grid and the photo? PDF file at this link:

  http://www.grad.HR/Mostovi/files/masivni/04_masivni_mostovi.PDF

  I need to print, but with all this color, it would be a terrible blow to my toner!

  p.s. I have Presentation adobe acrobat x pro...

  You could do it with preflight check, but the more fundamental question is whose record is this? The author applied this model to prevent people of the cloth located below print / of copy, and you have permission to edit the document? These forums never will help people engage in copyright infringement.

• Equium won't start - how to access the recovery partition?

  Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit, that no longer starts (probably due to damage of rootkit virus). It loads the BIOS but then goes to black screen with blinking cursor.

  F8 does not work.
  F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and a CD-ROM drive are listed in hand and start in the right order.

  Using F12 I can get it to boot from a Win7 64 bit repair disc that I burned using my laptop.

  However, it does not recognize the operating system or any image or restore points (because it is 64-bit) but he will be responsible for command prompt.

  To * guest *, I can launch Notepad and when I click on file / open and double click on computer it shows 4 Hard drives as follows:
  Local disc (c :))
  Data (d :)) 42 GB free of 54.5 GB
  WinRE (e :)) 1.11 GB free of 1.46 GB)
  Boot (x :)) 29.0 MB of free space of 31.5 MB (which is used by the repair disk)

  So the C: drive is listed, but without ability.

  * CHKDSK *.
  CHKDSK c: /r and press return

  «The type of the file system is NTFS.»
  Unable to determine the status and version of the volume. CHKDSK is abandoned.
  Cannot transfer messages saved in the journal of the events with the 50 State.

  * Run TESTDISK *.

  Analysis:
  Size of the partition start end in sectors
  1 P Windows RE (store) 0 32 33 191 89 26 3072000
  2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
  3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)

  * = Primary bootable
  When you perform a quick search, then P - list of files, the second partition it reports:
  "Cannot open the file system. Filesystem seems damaged. »

  So what I want to do is boot to Windows restore to drive E.

  My question is for Toshiba experts: If F8 does not work how to use the recovery partition?

  Laptop is:
  Part number: PSAF5E-002005KS
  Main features
  -Intel® Pentium® Dual-Core Processor T2310
  -Genuine Windows Vista® Home Premium Edition
  -Drive DVD Super Multi (Double Layer)
  -2 048 (1 024 + 1 024) MB of RAM (667 MHz)
  -15.4 "WXGA TFT display 1 280 x 800

  > THIS ISN'T MICROSOFT, TOSHIBA, AND GOOD PRODUCT DESIGN.
  I really put t know that should do better than to place the Microsoft sticker at the bottom.
  This product key and sticker on it's just proof that you purchased the machine with an operating system preinstalled and legal active OS version. This key belongs to original OS (recovery image) that you got with your laptop and it is not a kind of universal key that you can use for the activation of the operating system if you have made the decision to install the clean version of the OS.

  In General, this key is totally useless. While your computer you've got legal copy and this version, that you can install so often desired. It must not be enabled.
  > So my question still remains: can I recover my Toshiba laptop using this restore partition?
  If you want to recover using the Toshiba recovery image response is not. Cannot start HARD drive recovery facility.
  > Even with a dvd of Windows Vista is genuine, I can't reload the OS
  In my opinion you need make the clean OS installation using the clean installation or order original Toshiba Recovery disk on https://backupmedia.toshiba.eu/landing.aspx disc and install original (already active) recovery image.

• Help... How to use the recovery on Pavilion g4 2014tx partition

  Hi all... Would like to ask how to use the recovery partition and what is the effect if I used it... ?

  Thank you...

  Hello:

  You normally start the PC, and at the beginning of the HP welcome screen, you press the F11 key to start the Recovery Manager program.

  Then follow the instructions to restore your PC to its state of software "out of the box.

  In so doing you re-partition and reformat the hard drive.

  All THE data you have on the PC will be lost.

  So make sure that you copy the files that you want to keep on a portable hard drive before proceeding.

  It is also for if you have created a storage partition. You must copy all the files from that too.

  All partitions are erased and redone.

• How to make transparent images in Photoshop

  Hi all...

  I stuck somewhere and I need transparent Image.

  I want to know the procedure how to make transparent images in Photoshop.

  Help, please.

  Thanks in advance

  Remove the background you can see the checkerboard, and save them in a file PNG or GIF.

  This page will tell you how to select the area you want to keep

  https://helpx.Adobe.com/Photoshop/using/making-selections.html

• How to make a transparent background Photoshop elements 13

  How to make a transparent background Photoshop elements 13

  I opened a picture of a flower and does the following:

  1. Open the photo file
  2. The tool magnetic lasso to select the foreground
  3. Place the selection on its own layer (layer > New > layer per copy or CTRL + J)-this will be 1 layer
  4. Delete the background layer
  5. Went to file > save for web. PNG-24, checked file format forcing boxes proportion & transparency
  6. Save the file in a folder on the desktop.

  Open file with flower in PSE.

  Photo b/w open to post-secondary studies

  Flower slide the Photo tray until the work area

  If these steps do not work for you, try copying and pasting the flower to the new destination

  

• How to make the top sites page appears when I open a new tab? Why have I not of "buttons" to pin a top site of the page tab?

  When I open a new tab, NO best sites don't show up... shows just a search engine box. I have Firefox 33.0. Why is there no 'pin' button when I opened a new page? How to make the top sites page appears when I open a new tab?

  Here is some additional information on the configuration of the new tab page:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  Some traps:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on the addons page:

  "3-bar" menu button (or tools) > Add-ons > in the left column click on Extensions

  If the modification works during your session, but during the next startup is leads to: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?