How to make the setting for the microphone internal on my Dell Vostro 1540/1550?

Similar Questions

• How to make the frame internal as in Swing?

  How to make the frame internal as in Swing? JavaFX has the similar function?

  Note that the request to get the system tray functionality added to JavaFX is:

  RT-17503 provide a system tray support

  Which is currently scheduled for a version of update functionality to deliver * after * Java 8 comes out.

• Flag r-110 all-in-one: how to use the microphone internal hp r-110 all-in-one

  I know where the internal microphone, but how to use it? I always had an external mic in the past. My r-110 HP all-in-one is new so still get acquainted with it. What I need to set up the microphone and if yes, how and where. Win 10 has a configuration of mic with voice training / recgonition, but it does not show internal mic as a choice so I'm stuck! I would try to make a recording of the voice, but have no idea how activate the microphone. HELP and THANKS

  @terrib

  System is (perhaps) one of:

  Results for ' Pavillion r - 110 all in one " (51)

  Select System > product Home Page >

  Product information > category: specifications

  Form example:

  20 - r110d of HP TouchSmart all-in - One PC product specifications

  Microphone and Webcam are located at the front of the computer, along the top edge (top of the screen).

  

  If your taskbar contains the small speaker icon,

  Right click on the speaker icon >

  Playback devices > recording >

  Check / confirm that the "internal microphone" is selected as the default device

  You can also find the control of 'His' in:

  Control Panel > display icon > Sound

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Qosmio F20: How to use the microphone internal?

  Good, my second and last question (I hope).
  The F20 was a "microphone".
  How to use it?
  Does this mean that I will not need an external microphone at any point?

  Hello

  It would be very interesting to know the name of your Qosmio F20 - xxx, because there are many F20 with a different hardware configuration.
  I found some Qosmios F20 without the internal microphone on the Toshiba site.
  In this case, you can only use an external microphone.

  But if you laptop should internal microphone, it should be possible to enable this feature under control panel sound and Audio Devices tab, Advanced button Volume.

• How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it. In the Labview web UI designer

  How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it.

  I need to change the adjustment vaguely Autoscale property for my graphic indicator. Can someone help me please.

  Thank you!

  Hello

  I have confirmed that there is currently no way programmatically enable/disable autoscaling for axes on the LabVIEW graphical indicator generator of the user Web interface. We noted this to possibly be implemented in the future; Sorry for the inconvenience.

• I have associated my pencil to Apple for the iPad Pro; How to make the Widget of batteries displayed on the notification Center 'today '?

  I have associated my pencil to Apple for the iPad Pro; But how to make the Widget of batteries displayed on the notification Center 'today '?

  See if it works. Scroll to the bottom of the list in the display today. Tap on edit. Press on the + sign next to battery.

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• How to make the progress bar display in the icon in the taskbar for WIN 7?

  How to make the progress bar display in the icon in the taskbar for WIN 7? I see Eclipse Helios can show the loading progress bar in the icon in the taskbar of WINDOWS 7 at startup.

  Is not the feature that provides JavaFX, you must write a native connection called technology such as JNI to make specific Windows API call for updating the icon in the taskbar for the application.

  Maybe you could go through the Eclipse source code to see how Eclipse and see if you can make use of the same mechanism in your application.

  More tips on how you can implement this are outside my area of expertise.

• When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  Have you checked the home page to make sure that if is not the vertical bar (|) symbols?

  See the following for a few suggestions:

  • https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved

• Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Computer is a 32-bit Dell XPS * SP2 Windows Vista (Home Premium), Internet Explorer 9 Panda anti-virus

  Nothing new and NO change has been made.

  Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Even when I hide the taskbar I always can't NOT see the background.  Thanks in advance for any help. It drives me crazy.

  Set your resolution to be higher.  Right click on your desktop, go to personalize, then choose the resolution down.  Set it to the highest setting.

• How to make the default text size and line spacing in small Sticky Notes?

  How to make the default text size and line spacing in small Sticky Notes

  Hello

  I suggest that you try the method below and check if it helps.

  Method 1: analysis of auditor of file system (CFS)

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. To perform a scan of the SFC, check out the link: https://support.microsoft.com/en-us/kb/929833.

  Note: the steps for Windows 8/8.1, works perfectly with Windows 10.

  Method 2: clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you install a program, an update or when you run a program in Windows. Follow the link to perform the clean boot: https://support.microsoft.com/en-us/kb/929135.

  Kind regards

  Angelo bar

  Microsoft community

• How to make the color of the sky, exactly the same thing in multiple images?

  How to make the color of the sky, exactly the same thing in multiple images?

  Bengt Nyman wrote:

  I'm not trying to replace the sky. I want to talk to a group of photos BIF where the percentages of red, green and blue in the sky varies from a few percent, but enough to disrupt continuity within the group. I like t would be able to use the percentages of color to one of the pictures and replicated in others.

  Because the brightness of the sky probably varies from image to image using percentages RGB will not work. What you can use are the values of a and b the laboratory values . Right-click in the inside of the develop module histogram and tick 'Show Lab Color values.' You can ignore the value of L, which is the value of Luminance or brightness. Adjust the blue sky s a b valueusing the Temp WB and sliders dyed until they are the same as your first reference image file. The value determines the color red/green balance if you use the Tint slider to correct the value. The b value determines the color yellow/blue balance if you use the slider Temp to correct its value.

  Remember that setting the base Panel WB with 'fixed' values of b for photos taken under lighting conditions different sky will be the color of the other objects in the image look incorrect (birds, trees, buildings, etc.). In this case, you will need to use the brush setting to paint in the region of the sky and then use its temperature sliders and tinted to change just the color of the sky.

  To be honest I don't know why you feel it's necessary. Maybe you can post two screenshots: 1) with the sky that they way you want to and 2) an image that you want to resolve to match.

  

• How to make the status of concurrent program error

  Hi Experts,
  
  I've written a PL/SQL package procedure, created an executable w / values for my 2 IN parameters and he attributed to a simultaneous program to the e-business suite.
  
  The specification of the procedure looks like this:
  

  PROCEDURE PROC1 (
  errbuf OUT NOCOPY VARCHAR2 ,
  retcode OUT NOCOPY NUMBER,
  p_contract_number IN VARCHAR2,
  p_end_date_char IN VARCHAR2 
  );

  Here my requirement is like this,
  
  How to make the status of the program contributing to the error even if the program successfully completes.
  Please let me know how?
  
  Thank you
  Suman V.

  Hello

  To give an error output, simply put the RETCODE contains 2
  To give a warning output set to 1
  for and OK output set to 0.

  If your procedure may be:

  procedure proc1 (errbuf OUT NOCOPY VARCHAR2,
  OUT NOCOPY RETCODE NUMBER,
  p_contract_number IN VARCHAR2,
  p_end_date_char in VARCHAR2
  ) IS
  BEGIN
  RETCODE: = 2;
  errbuf: = ' this CR WRONG because I wanted it ';
  END;

  This will give you an error.
  It may be good to your CR PLSQL like this:

  procedure proc1 (errbuf OUT NOCOPY VARCHAR2,
  OUT NOCOPY RETCODE NUMBER,
  p_contract_number IN VARCHAR2,
  p_end_date_char in VARCHAR2
  ) IS
  BEGIN
  RETCODE: = 0;
  return;

  exception
  while others then
  RETCODE: = 2;
  errbuf: = "an error has unhandeled."
  return;
  END;

  This way execptions generate an error.

• Can you please tell me how to make the thicker arrows on the Pages.

  Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

  < re-titled by host >

  Try here > Pages for Mac: Add and edit forms