How to map the csv (not columns) cells in the columns of table, import with sql loader

Similar Questions

• How Oracle calclutes the cost for table analysis with non-voltage costs CPU.

  If the CPU costing are disabled and the column of blocks shown 1000 for a table in the user_tables and DB a DB_BLOCK_SIXE = 8KB and DB_FILE_MULTIBLOCK_READ_COUNT = 8.
  
  What will be the cost of a complete analysis of the table? How it will be calculated.

  user445775 wrote:
  Thanks Randolf,

  Infact I'm reading the same book and I was confused with the "adjusted" way MBRC is calculated?
  is it remain static in the database if I don't change MBRC? If not what are the factors can change the MBRC "adjusted".

  I recommend to download the code repository and run the script 'calc_mbrc.sql '. For each MBRC, it will show you the corresponding MBRC "amended". This looks like an adjustment factor "coded", static, built-in that simply depends on the defined MBRC, so for example if you use MBRC = 16, 10.40 is used as MBRC "adjusted", if you use a 64 MBRC a MBRC "adjusted" 25,84 will be used for the calculation (note how the largest EEG MBRCs and a more pessimistic "adjusted" value) etc.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• How to replace the subset of table nd with table 1 d to i, j

  Hello

  I am trying to replace a range of values in an array multidimensional, beginning with the cell i, j, both greater than 0, that is to say a square inside the Bay of nD. The new values which replace older ones come from a 1 d table. However, when I provide two indexes to replace table subset block I get a bad wire... I guess it is due to the fact that labview does not know which direction to replace data? Is there a solution to this? I enclose an example vi of what I'm trying to do.

  Thank you very much.

  This should do the same thing without all the extra steps.

• How to map the role defined in JDeveloper for LDAP

  Hello

  I'm trying to figure out how to map the Illustrazione roles when the BPM process design and the LDAP protocol.

  I have deployed on the soa server processes, I can see the ear on the page of the Console.

  I did the following:

  1. connect to the Oracle BPM workspace (http://localhost: 8001/bpm/workspace /) as the user WebLogic.

  2. click on the administration link.

  3. click on roles in the Administration Panel of the areas on the left, to the list of all different roles across all deployment processes.

  but I do not see my deployment process.

  Do you know why this is? In my approach I just added my roles for the corridor. Is this correct? Why can't I see not all roles deployed?

  Well, if you do not want to deploy physically, you can build your project. However, you may encounter errors during deployment of the projects built with success.

  I guess that you have a development/test environment where you can check if your application is deployed.

  Last resort - player process. For a process, really, it is deployed on a special partition on the soa infrastructure and should play not accessible by end users.

  See you soon,.

  Anatoli

• How to map the name of the hard drive on behalf of data store

  Hello

  I inherited a bunch of ESX host... some with discs

  are shown for the disk monitor S.M.A.R.T. comply.

  Is

  There are best practices (commands) to familiarize

  yourself with a new host you inherited, please share these command

  goodies online here.

  One thing I was not able to determine

  is how to map the drive device names (like the sda, sdb) VMware

  the names of local storage that have been created by the system administrator who

  Configure the host. (referring to the "datastore" names I see in the)

  vSPhere Client GUI.)

  Thanks for the tips!

  AZ

  esxcfg-scsidevs and esxcfg-vmhbadevs and esxcfg-mpath will help to map the device names to the LUNs and data store names.

  vExpert

  VMware communities moderator

  -KjB

• How to open the files .fxm and .fxr with fax windows 7 & scan?

  How to open the files .fxm and .fxr with fax windows 7 & scan?  These faxes have been received when I had Windows XP.

  Hello

  A file with FXR and FXM file extensions is a Document received from WinFax.

  You can open the FXR and FXM file by double clicking on it and let your PC decide which default application should open the file.   If no program opens, the FXR and FXM file, then you have probably an installed application that can view and/or edit FXR and FXM files.

  You can use a Notepad or another text editor to open these files.  Number of files is files read-only, which means little matter file extension, a text editor may be able to view the contents of the file properly.  This may or may not be the case with FXR and FXM files, but it's worth a try.

  How a FXR and FXM files:
  There are two ways to try to convert a file to a different file type:

  a. open the FXR file in its default program and choose to save the file open in another file format.

  b. use a softwarefrom online file conversion to convert these files to another file format.
  
  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you

• How to judge the backup set is available (with RMAN)?

  Hi all, after you back up the database, how to judge the backup set is available?
  
  SQL > SELECT * FROM V$ VERSION;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

   rman target /
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Mon Jul 9 12:28:51 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: CATDB (DBID=2328696599)
  
  RMAN> crosscheck backupset;
  
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=24 device type=DISK
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_NNNDF_TAG201206
  14T153439_7XMHL0JL_.BKP RECID=34 STAMP=785950480
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_ANNNN_TAG201206
  14T153546_7XMHN2C6_.BKP RECID=35 STAMP=785950546
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785950547_7X
  MHN4MH_.BKP RECID=36 STAMP=785950548
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785953535_7X
  MLKN66_.BKP RECID=37 STAMP=785953539
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785971797_7X
  N4D6YF_.BKP RECID=38 STAMP=785971798
  crosschecked backup piece: found to be '*AVAILABLE*'
  backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_29\O1_MF_S_787249342_7Y
  V4001O_.BKP RECID=39 STAMP=787249359
  Crosschecked 6 objects
  
  RMAN> list backupset;
  
  using target database control file instead of recovery catalog
  
  List of Backup Sets
  ===================
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  26      Full    320.44M    DISK        00:01:03     14-JUN-12
          BP Key: 34   Status: AVAILABLE  Compressed: YES  Tag: TAG20120614T153439
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_NNNDF_TAG201206
  14T153439_7XMHL0JL_.BKP
    List of Datafiles in backup set 26
    File LV Type Ckp SCN    Ckp Time  Name
    ---- -- ---- ---------- --------- ----
    1       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\SYSTEM01.DBF
    2       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\SYSAUX01.DBF
    3       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\UNDOTBS01.DBF
    4       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\USERS01.DBF
    5       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\CATMETADATA01.DBF
    6       Full 3712551    14-JUN-12 D:\ORACLE\ORADATA\CATDB\UNDO2.DBF
  
  BS Key  Size       Device Type Elapsed Time Completion Time
  ------- ---------- ----------- ------------ ---------------
  27      99.50K     DISK        00:00:00     14-JUN-12
          BP Key: 35   Status: AVAILABLE  Compressed: YES  Tag: TAG20120614T153546
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_ANNNN_TAG201206
  14T153546_7XMHN2C6_.BKP
  
    List of Archived Logs in backup set 27
    Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
    ---- ------- ---------- --------- ---------- ---------
    1    47      3712495    14-JUN-12 3712583    14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  28      Full    9.45M      DISK        00:00:02     14-JUN-12
          BP Key: 36   Status: AVAILABLE  Compressed: NO  Tag: TAG20120614T153547
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785950547_7X
  MHN4MH_.BKP
    SPFILE Included: Modification time: 14-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 3712594      Ckp time: 14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  29      Full    9.45M      DISK        00:00:07     14-JUN-12
          BP Key: 37   Status: AVAILABLE  Compressed: NO  Tag: TAG20120614T162535
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785953535_7X
  MLKN66_.BKP
    SPFILE Included: Modification time: 14-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 3715284      Ckp time: 14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  30      Full    9.45M      DISK        00:00:02     14-JUN-12
          BP Key: 38   Status: AVAILABLE  Compressed: NO  Tag: TAG20120614T212957
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785971797_7X
  N4D6YF_.BKP
    SPFILE Included: Modification time: 14-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 3735186      Ckp time: 14-JUN-12
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  31      Full    9.45M      DISK        00:00:23     29-JUN-12
          BP Key: 39   Status: AVAILABLE  Compressed: NO  Tag: TAG20120629T162221
          Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_29\O1_MF_S_787249342_7Y
  V4001O_.BKP
    SPFILE Included: Modification time: 29-JUN-12
    SPFILE db_unique_name: CATDB
    Control File Included: Ckp SCN: 5138750      Ckp time: 29-JUN-12
  

  Please do not forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Published by: Julien Hesenov on July 9, 2012 12:42

• How to save the data in table 1 d to Excel in continuous

  Mr President.

  How to save the data in table 1 d to Excel at all times, so that all the data of the first scan must be placed first thought and all the data from the second analysis must be placed on the second Board and continue on the street...

  Sy@m...

  Hi Sy@m

  Here is a vi that might give you a few ideas to try:

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• How to decompress the files downloaded for use with Windows 7?

  How to decompress the files downloaded for use with Windows 7.  Specifically, zip files are a Magellan GPS unit.

  There are instructions at: http://windows.microsoft.com/en-us/windows7/compress-and-uncompress-files-zip-files

• How to display the path of a contact with a program?

  How to display the path of a contact with a program?

  Hey,.

  Follow the mentioned below as follows:

  1. Go to Contacts > Contacts.
  2. Highlight the contact to which you want to see the way through the program.
  3. Click on the newspaper story > program activity.

  Thank you...

• How to get the description of text box with some HTML < P > tag

  Hi friends,

  I created two point, an element of box P1_RICH_TEXT_FIELD rich text field and a text item field area P1_TEXT_AREA. I created the calculation process to copy the value of P1_RICH_TEXT_FIELD in P1_TEXT_AREA. Calculation works well but contect copy in P1_TEXT_AREA are

  < p >

  Test Test description description < /p >

  < p >

  Test DescritionTest DescritionTest description < /p >

  < p >

  Test DescritionTest DescritionTest description Test Test DescritionTest Test Test Test Descritionhkjhkh < /p > description description description description

  
  

  I need to copy with the tag < p >.

  
  

  How to get the description of text box with the HTML < P > tag

  
  

  
  

  Thank you
  

  Hi Alex,

  Thank you very much. You want very criticle problem for me. Thank you very much.

  Now, there are several tags in the rich text field

  "span, h1, h2, h3, h4, h5, h6, p, blockquote, pre, a, big, del, dfn, em, img, ins, kbd, q, s, samp, small, strike, strong, sub, sup, b, u, I, Center, dl, dt, dd, ol, ul, li, label, table, caption, tbody, tfoot, thead, tr, th, td" etc.

  How can I move all these in REGEXP_REPLACE (: P1_RICH_TEXT_FIELD, ')

  |

  (", 1, 0, im ') code.

  Thank you

• How to play the music on bluetooth compatible with my Tungsten TX speakers?

  How to play the music on bluetooth compatible with my Tungsten TX speakers?  I have the speakers identified on secure devices but can't work how to get music on them!  Any ideas?

  Cheers, Johnnyboy69

  Hello and welcome to the Community Forums of Palm.

  You should try a third party called Softick Audio Gatewayapplication.

  Message relates to: Centro (AT & T)

• How to find the user Apex table

  Hello
  
  Please let me know, how to find the user apex table. I need validate the unique user based on the same, for which I use below function.
  
  DECLARE
  VAL A BOOLEAN;
  BEGIN
  VAL: = APEX_UTIL.IS_USERNAME_UNIQUE (p_username =
  (: P6_USERNAME);
  END;
  
  However, in this case, he always comes back "FALSE," saying new user exists.
  
  Kindly help me in fixing this problem.

  There is a view called apex_workspace_apex_users.

  Details under Home > utilities > Application Express views

  André

• How to map a dynamic/computed column in the annotation of persistence?

  I try to use APP to map the results of a query to a class, but one of the columns returned by the query is the result of a subquery - it has no really a column associated with it.
  
  Example:
  
  Select a, b, c,.
  case when it exists (select 1 from some_other_table where...) then 'Y' end ' n else as test_flag
  of une_table
  where the...
  
  This case statement that performs a subquery to produce a result that is not actually mapped to a physical column so I
  
  How to mark such a situation, so that roll in hibernation, or anything that fills the a property named testFlag when it loads the results of this query?

  Trant says:
  I try to use APP to map the results of a query to a class, but one of the columns returned by the query is the result of a subquery - it has no really a column associated with it.

  Can you share the code? This seems to be the opposite of what JPA or any ORM package is intended; you would usually the ORM package produce SQL statements based on an object model and a query of high level object, but you try here to feed a sort of a pre-existing query object model. As I said - back. You may want to use executeNativeQuery?

  Whenever I am confronted with a situation where a request starts to do involving the unions, subqueries, etc.. I keep the side JPA as stupid as possible. I create a view on the side of the database and that you simply map my entity to this point of view. With appropriate indexing in place which usually performs very well.