How to migrate a machine Ubuntu in VMWare Fusion?

Similar Questions

• How to migrate virtual machines from the virtual server MS in Lab Manager?

  We migrate our environment. So primary question is - how to migrate our MS VirtualServer VMs to Lab Manager?

  BR

  Hello

  Have you tried using using VMware vCenter Converter?  It can take Virtual PC machines and turn them into VMs VMware (.vmdks), you should then be able to manufacture models of VMware virtual machines, import them into the Lab Manager and voila.

• Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

  Hi all

  I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

  I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

  Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

  Thank you very much in advance.

  Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

  1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

  2. connect the sensor to the host (Mac) Port Ethernet card.

  3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

  4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

  5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

  Example:

  The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

  Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

  Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

  In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

  BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

  This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

• Can I migrate existing Win7 Pro VM since the VCenter for MAC OSx 10 using the Migration Assistant from PC and VMWare Fusion 4.0 and

  I have a P2V to ESX virtual Center successful and is not passed to my MACBook Air with Lion 10 and using VMWARE Fusion 4.0?

  I keep getting errors of failure while trying to use the PC Migration Assistant within the virtual machine and the MAC is using the Migration Wizard in the Fusion 4.0 and MAC begins the process, it keeps saying that it is impossible to write the file to the folder I chose on the local Documents of the MAC hard drive.

  Please inform, all the firewall settings are disabled on both sides, and file sharing is enabled on the MAC, including Windows SMB for the profile folder / I am tempted to write to...

  Simply copy the vmx and vmdk of this virtual machine via scp or any equivalent to the mac

  you don't need the Migration Wizard

• How to do a clean reinstall of vmware fusion and windows 7 x 64? Please HELP back to HAppy

  Initially, I installed vmware fusion and windows 7 x 64 about 2 to 3 months ago. Everything was fine until quite recently when vmware or windows has become very agitated and would freeze on me after 2-3 minutes whiles work in windows 7 and the merger. Will have to restart merger every 2 to 5 minutes or more.  So as a result, I went to my local apple store (thinking that I had a problem to apple/mac) and they recommended I uninstall windows and vm fusion. then re-install fusion vmmware and windows .Although this second time I missed something because instead of installing windows taking under an hour and a half, the facility has taken from one day to the next and never finished.

  When I rebooted vmware, I get the message.

  Fusion 3.0 or 3.1?

  "The computer restarted unexpectedly or encountered an error."  Windows cannot continue. To install windows click ok to restart the computer, and then run the Setup again. »

  How to return to a functional copy of the fusion of windows 7x64and the first time I installed windows, 2 to 3 months ago, that it took me another installation of winds article take the day after and don't ever finish?

  PLEASE NOTIFY

  brian35

  VMware Fusion (menu bar) > help > Search > type uninstall, then select uninstall a Virtual Machine by our care...

  There are two...

  Uninstall a Virtual Machine using the Finder

  Uninstall a Virtual Machine by using the Virtual Machine library

  The go back and select uninstall VMware Fusion

• Can I run a machine virtual de VMware Fusion, VMware Server 2?

  I looked at a bunch of documentation confusing but couldn't find a clear overview of what VMware Server 2 does in fact.

  I hope that I can take the virtual machines that I've created with VMware Fusion and download them on VMware Server 2 on a server somewhere and run it from there.

  Is this possible?   Is there any clear, simple documentation that indicates how to proceed?

  Thanks for any information you can give me!

  Hello

  If you run the virtual machine in fusion directly in vmware server, these are the steps to follow:

  (1) find out where are the fusion virtual machine files.

  (2) stop & remove merge (do not remove fisically hd!) virtual machine.

  (3) copy files of the virtual machine of fusion to the vmware server host (with the .vmx file and the hard should be enough) in the directory you designate as data store for vm vmware server files in the installation of vmware server.

  (4) use the "adding a virtual machine to inventory" to navigate to the file .vmx of the virtual machine that you copied before

  (5) the machine running and try. (if a question arises, you say that you copied the VM).

  Maybe you should do some additional steps as reconfigure it the virtual machine under vmware virtual network install, but there are minor and easy changes.

  Here is some information about the files that make up a virtual computer: http://www.vmware.com/support/ws55/doc/ws_learning_files_in_a_vm.html

  A saludo/best regards,.
  Pablo

  Please consider awarding

  any useful response. Thank you!! -

  Por favor considered premiar

  Las useful responses. MUCHAS gracias!

• How to migrate virtual machines to a group of commissioning to the other without any impact on the functioning

  Hello

  I'm not able to migrate VMs who resided originally in a Provisioning group but now must pass on the other wanted to change depending on the user and roles, but do not want to expose two commissioning groups to the user.

  I was able to change the VM but don't see change not all groups options.

  Please help find a way to do this.

  BR,

  MG

  VCAC 6 I know that you can migrate between the reserves, but I don't remember if it was a function of 5.2 as well (I've not used for about a year now). If all goes well it gives you somewhere to start.

  

  Grant

• Move a machine virtual in Vmware Fusion (Mac) of Vmware Workstation (PC)

  I guess that most people worry about how to move a virtual machine from the PC to Mac. I have exactly the opposite need.

  Will there be a way to migrate toward the back of the Mac to the PC? VMware Workstation recognizes as virtual machines created with the merger?

  I agree with etung provide a list of files.  The virtual machine has been turned off when you have copied the disk NTFS?  Do you have pictures?  I usually don't use snapshots and always make sure that the virtual machine is turned off before changing platforms, but the error message sounds like you can't be in the same State before performing the copy.

• How to convert the ESXi VMware Fusion VM VM?

  Hello

  We intend to move all ESXi virtual machines to MAC (VMware fusion). So, I was looking for to convert those virtual machines. Help, please. Can I install VMware converter on ESXi OS? Or?

  Hello.

  You must install the converter on a Windows System. You can also try to export ESXi virtual machines by using the vSphere Client and then import them directly into the merger.

  Just out of curiosity, why abandoning you ESXi and moving towards the merger?

  Good luck!

• VMware Fusion 7 and VMware Tools - leak memory in Debian comments

  At some point during my updates from Mac OS X to Yosemite, VMware Fusion to 7.x and my Debian a guest to 8.0 "Jessie" on my 2012 Mackbook Pro, leaking memory of the Linux kernel is developed.  If I follow these steps, then I'd lose soon about 3 GB memory of the core area.

  1. Install Debian Jessie in a new machine virtual de VMware Fusion
  2. Install open-vm-tools or VMware Tools bundled.
  3. Perform an intensive IO as operation simply cat/dev/zero |-c 1000000000 head >/tmp/test.txt.
  4. Smem - wtk and see ~ 3 GB memory under the dynamics of the kernel memory, benefit.

  I opened the 15709682007 assistance request and the representative said that they will fix the problem in a future release. In the meantime, I have what seems to be a workaround for someone else that is affected.  Basically, pulling packages from backports jessie seems to have solved the problem.  This is based on the comments added to open-vm-tools.

  1. Add the Debian repository -backports jessie in /etc/apt/sources.list
  2. sudo apt - get update; sudo apt - get install t Jessie-backports open-vm-tools-dkms open-vm-Tools-Office
  3. sudo apt - get - t jessie-backports dist-upgrade (install kernel 4.1)
  4. Restart comments

  A few quick thoughts:

  1. If you have several virtual machines (or other programs) running on your computer host and VMware Fusion detects that there is memory pressure on your host computer, it uses the "balloon" (vmw_balloon for the latest distributions of Linux) Guest pilot to fly some memory of the guest OS.  This memory "stolen" would appear as memory Dynamics non-cache kernel inside the guest.  Running "sudo rmmod vmw_balloon" should release all memory climbed to the guest OS.  Note that using the balloon driver generally improves the performance of the guest and host, despite the appearance of fear "used memory" inside the guest-"used memory" is just a thing of accounting that we had to use in order to change the priority of the memory between the host and the guest.  It is not "used" in the conventional sense of the term.

  2. I believe that recent versions of virtual hardware non-cache dynamic kernel allocate the necessary memory for SVGA and 3D features (display RAM, texture RAM, etc.).  Disable graphic 3D acceleration or by reducing the amount of graphics shared memory if you are using a new version of virtual hardware (both in the VM > settings... > display) might help.  Decommissioning of a virtual equipment as early (in the VM > settings... > compatibility) can also help.

  See you soon,.

  --

  Darius

• VMware Fusion has encountered an error and has stopped Windows.

  Summary:

  I started experiencing this problem in November and was beaten on that since including using the VMware support and Apple support.

  Full of the message in the virtual machine window:

  = VMware Fusion has encountered an error and has stopped

  = bottom of Windows.

  ====

  = Click on restart Windows to start Windows again.  Click report for

  = collect and request the support of VMware.

  ====

  = < ignore > < report... > < Windows restart >

  By clicking < report... > generates the report

  Clicking on < reboot Windows > hangs the system.

  Various VMware Fusion, Virtual Machine commands do nothing.

  Again, only way I found to get there is to Apple, Force Quit of VMware Fusion.

  Two systems in question, iMac and MacBook.

  Familiar to anyone else?

  Details: =.

  The two systems were very well work well on several years.

  Status of starting point was.

  -iMac and MacBook running VMware without any problems for several years.

  -This includes several updates to Mac OS and VMware Fusion.

  -OS X 10.9.5 on both systems with the latest upgrades.

  -VMware Fusion 6 on all systems with the latest upgrades.

  -Virtual Machines on two almost identical systems - Windows 7, all derivatives of a VM database.

  
  

  Problem started only on iMac.

  
  

  In weeks, with the encouragement of support VMware and Apple have updated to Yosemite, installed VMware Fusion 7 and built Windows 8.1 scratch machines.

  
  

  Problem now happening on both systems with MacBook, stay alive for about 15 minutes and iMac may be several hours.

  Any ideas appreciated.

  Thank you.

  Paul

  In summary...

  This problem was initially detected on iMac and MacBook:

  Mavericks

  Fusion 6.x

  Windows 7

  The ultimate resolution iMac and MacBook:

  Yosemite

  Fusion 7.1.1

  Windows 8.1

  Details of the way pick up what 7.1.0 merger was in place for the ultimate resolution in the chat messages.

• VLAN in VMWare Fusion

  Hello

  I'll put up a lab using Fusion on my Mac environment, but I noticed that there are no of VLAN or option to connect computers isolate to be only interconnected virtual (isolated network).

  I missed the option, it is an add-on or how can I achieve this?

  VMware Fusion provide three default to choose, bridged, NAT and host-only virtual networks and the latter allows to completely isolate the host virtual network only by downing host VMnet1 virtual network adapter and this can be done from a Terminal by using the ifconfig command.

  sudo ifconfig vmnet1 down
  

  In addition VMware provides not a GUI in VMware Fusion to add additional networks or change the default existing however, you should be able to glean what needs to be done by having a look at my answer to: Re: creation of two (or more) Host-Only totally isolated networks

• You started VMware fusion with an outdated version of the application

  I bought a new disc fusion 3.0 version and it loaded on my new macbook pro and also to load Windows XP.  Everything worked fine until I'm showing that an update was available.  After update, when I start the fusion, the message arrives, 'you started VMware fusion with an outdated version of the application. VMware fusion can not power on virtual machines using this copy (version 3.0.0) to power on this virtual machine and run VMware Fusion of the default location"Does anyone have any idea what it means or if there is a fix?

  If you have VMware Fusion.app a subfolder of the Application or in he moved to the outside/applications, you must give the app and run it from the Applications.  If this is not the case, try to search with Spotlight for several copies of Fusion on your system to see if you have copies of somewhere, maybe an old backup.

• How can I get the version of VMware to virtual machines with powercli officer?

  How can I get the version of VMware View Agent running on a virtual machine with powercli or view Powercli?

  As much as I know there is no cmdlet PowerCLI for this, but you can use the Invoke-VMScript cmdlet and interrogate the Win32_Product class.

  By running the following. You can add a Where clause to return only the Agent of the view

  Get-WmiObject-class Win32_Product | Select the name, Version

• VMWare Fusion for Mac - how much space HARD drive is my virtual machine taking?

  So, I am running VMWare Fusion on my MacBook Air, and I'm under low HARD disk space.  My Mac storage utility tells me that I have a ton of capacity used in the 'Other' bucket.  According to me, this bucket is where live VMWare Fusion.  As I understand it, technically, my complete operating system of Windows (including all files) is contained in a single file on the Mac side.  Is this correct?  Is it possible to see what capacity takes up my whole Windows Operating System (Virtual Machine)?  I hope this makes sense.  Thanks in advance for your comments!

  -Chill

  ChillOne wrote: as I understand it, technically, my complete operating system of Windows (including all files) is contained in a single file on the Mac side.  Is this correct?

  No, it's not correct!  A Virtual Machine is composed of many files and folders according to how it configured and used.  On a Mac if created natively by VMware Fusion using values by default so all the files that make up a virtual machine are in all of the Virtual Machine that is structurally nothing more then a regular folder except the extension .vmwarevm, it is treated differently by the launch in OS X Services.  Take a look on: work with Virtual Machine packages

  The files that make up the Virtual Machines from Windows/Linux systems and other places my being in simple ordinary folders.

  Is it possible to see what capacity takes up my whole Windows Operating System (Virtual Machine)?

  You can also see statistics for a given Virtual Machine by selecting Virtual Machine in the library because it displays size information, as well as on the General form of a virtual machine; s parameters.  Or look in the Finder and see the release of Get Info for the packaging of the Virtual Machine or the folder that contains the files that make up the Virtual Machine.