How to move the control file ensures ASM

Similar Questions

• How to move the MSWMM files and keep the data on my computer?

  I downloaded digital film from my camera to a destination on my D drive as a file MSWMM (collections), and whenever I try to move the downloaded film (collection), it does not recognize the movie more.

  How to move the MSWMM files and keep the data on my computer?

  The mswmm file is the project file, not a video.
  Think of it as a recipe for a cake, it only tells you what to do with the ingredients, but does not include the ingredients.
  The mswmm file tells the computer to look in a certain folder to use a video or audio file.
  If you move the file, then MM knows not where is the file, then you must tell it, by right clicking on a red x on the timeline and then choose search for the file.

• How to move the index file...?

  I have files of data to index as follows...
  
  /U02/MY_TEST_DATA/indx01.dbf
  /U02/MY_TEST_DATA/indx02.dbf
  
  I'm running out of disk space available in u02.
  
  How to move the two files above to u03? I have a lot of space in u03.
  HP Unix, Oracle 10g R2.
  
  What I need to change other settings when I move the location of the file? for example, backup, archieve etc...
  
  Please advice.
  
  Thank you
  GISH

  Hello..

  Well you can do it in one of 2 ways: -.

  1 put the tablespace contains the data offline files, copy the data index files to the new location, and then change the database rename ' old/file/name/location of the file' to 'new/file/name/locatio. put storage space online. Completed successfully, remove the file data from the old location.

  2. in the hope that these two data files belongs to 1 tablespace and tablespace that contains only the index, you can create a tablespace with its data on the new mountpoint file again, then rebuild the index of aid (dynamic script)

  change owner.index_name tablespace new_tbs_name n parallel reconstruction;

  Once all the indexes have been moved to the new tablespace you can drop the previous old tablespace.

  I would prefer 1.

  HTH
  Anand

• How to move the FLASH_RECOVERY_ARE file to new drive?

  Thank you for taking my questions!
  
  Does anyone know how to move the files from e:\oracle\flash_recovery_area\* to a new disk?
  
  Thank you
  Kathie
  
  THE OPERATION HAS FAILED:
  I created a new pfile.
  Edition pfile changing old drive to the new drive letter letter.
  immediate stop
  to the E:oracle\flash_recovery_area\ S:\oracle\flash_recovery_area\* *.
  startup nomount;
  Create spfile from pfile;
  stop immediately;
  startup
  
  Now I get ORA = 38760 - this database instance could not turn on the flashback database;

  Kathie,

  Try this by first editing the database

  1) First Turn off Flashback:
  
  SQL> alter database flashback off;
  
  Monitor alert log for messages regadring flashback:
  
  Then s turn the flashback on again.
  
  SQL> alter database flashback on;
  
  SQL> Alter database open;
  

  Concerning

• How to move the snapshot file

  Is there a way to move the snapshot files to some other hard disk partition?

  I'm running out of space on my hard drive partition wherer my VM resides, only option I have available is to remove my shot, I don't want to.

  Any suggestion?

  You must edit the vmdk and vmx - if it works by simply changing the vmx you do something I don't understand ;-)

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• How to move the email file large document CD

  You will need to register email big files on CD - straight forward answers appreciated.

  Thank you

  Hello

  Thanks for posting the query on Microsoft Community.

  It would be great if you can answer the following questions:

  1. are you referring to the attachments by e-mail?

  2. are you referring to the complete email content?

  3. are you using a mail client or web based email?

  4. what browser you use on the computer?

  If you are referring to attachments, you can download and save on the hard drive. Later, you can try to burn the attachments on a disc.

  See the article for more information:

  Burn a CD or DVD in Windows Explorer

  If you're still having problems, please reply with more information to help you better.

• Firefox 6 need to move the cache (files temporary folder) to a specific file

  Hello I need to know how to move the temporary file for firefox folder 6. I managed to do it easily for IE as it can be done from the settings tabs for firefox but, I need to access the topic: config so I understand. However after that I implemented browser.cache.disk;D:\Temporary Internet Files and browser.cache.offline;D:\Temporary Internet Files, nothing seems to happen like firefox still uses the original place

  Pref is correct browser.cache.disk.parent_directory - does not exist by default, the user needs to create.

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I validate the data in the control file?

  Consider that the SQLLoader reads the data entry of the path file and loads the data in the base tables up on top of the description specified in the control file.
  First, the form is created:
  
  create table sql_loader_1 (load_time date, digital Champ_1, Champ_2 varchar2 (10))
  Example of control file:
  load_1.CTL
  
  load data
  INFILE "load_1.dat", "str"\r\n"
  insert into table sql_loader_1
  (
  load_time sysdate,
  Champ_2 position (01:10).
  Champ_1 position(11:20)
  )
  Note that positions 11 to 20 are loaded in positions 1 to 10 in Champ_2 and Champ_1. The load_time field is filled with time current (sysdate) load.
  
  Here is the data. The name of the file (load_1.dat) had been specified with the statement for infile in the control file.
  
  load_1.dat
  
  0123456789abcdefghij
  **********##########
  foo bar
  This is a very long line
  and the next one is
  short
  
  declared the Champ_1 as a numeric data type, but the input data file contains the data "Sue"(position 11:20) so the sql loader adds not the record to the database instead the record is written in the bad file. But I want to validate the data of the "(position 11:20) is digital or not." How can I post this in the control file itself? If it is not possible, how can I validate it in the database? give me a sample code to explain this

  Here are two ideas.

  Idea 1: This control file will check to see if the data to be loaded in Champ_1 contains a number (including the negative and decimal).

  load data
  infile 'load_1.dat' "str '\r\n'"
  insert into table sql_loader_1
  (
  load_time sysdate,
  field_2 position( 1:10),
  field_1 position(11:20) "decode(trim(translate(:field_1,'-0123456789.',' ')),null,:field_1,-999)"
  ) 
  

  If Champ_1 is a number or null, it is passed through, as is. If there is no numeric characters (in addition to '-'and'.') a distinct value-999 will be inserted for you allow to load the rest of the columns and easy to see the lines had data that cannot be loaded in Champ_1. This idea has its flaws (a string like "... ("will always drain the .bad file)

  Idea 2: Load the data into a staging table first (or define an external table) where all columns are VARCHAR2. Then use SQL or PL/SQL to validate data in the staging table in your process to move the data into the table with the actual data types.

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  You must set the source patch:

  

• How do I have to move the index file so it will end up the rest of the files indexing?

  CS6 as file are loading it stops, indexing to a certain xml file which is non exsistant in the project... How do I have to move the index file so it will end up the rest of the files indexing? Is there a way to get the file that will not index?

  Post edited by: Kevin Monahan Reason: title was too long

  Indexing stops when you open the CS6 project

• How can I specify location of the control file when the manual creation of DB?

  DB version: 11.2.0.4

  OS: Oracle Linux 6.6

  The CREATE DATABASE command creates the control file.

  CREATE DATABASE command is executed once you start the instance in NOMOUNT State as shown below.

  SQL > startup nomount pfile=$ORACLE_HOME/dbs/initBRCPRD.ora

  SQL > create database 'BRCPRD '.

  MaxInstances 32

  MAXLOGHISTORY 1

  maxLogFiles 192

  maxlogmembers 3

  ..

  .

  .

  < snipped >

  When you create the database manually, we can define the control_files parameter in the init.ora as below and control file will be created at this location. Right?

  control_files = ("" / u01/oradata/BRCPRD/BRCPRD_control01.ctl","/u01/oradata/BRCPRD/BRCPRD_control02.ctl "")

  When I was generating the DB using DBCA GUI creation scripts, it asks to enter the location of the Online redo logs and control files.

  I entered my desired location. But, I couldn't find CONTROL_FILES parameter in the init.ora file generated the DBCA. This is why I got confused. I think that DBCA is internally somehow. So thought I'd post it here.

  Hi John, OP

  Just checked the init.ora file created by DBCA. Although the parameter CONTROL_FILES is undefined, db_create_file_dest = '+ DATA_DG1' was created. OMF default location is defined by the db_create_file_dest parameter.

  So, I could safely use this script for the manual creation of DB, and during the CREATE DATABASE command execution, oracle will place CONTROL_FILES + DATA_DG1 using the format;

  +DiskGroup/dbname/filetype/filetypetag.file.incarnation

• How to shorten the music file to match the selected slides

  I created a slide show with windows vista movie maker.  How to shorten the music files to match both of the selected slides.  Using the fade out option did not work

  Hello

  You can try the following methods and check if it helps.

  Method 1:

  (a) open your filmmaking program and create the slide show using your photos. Choose the options you want for changes between the photos and the duration of each photo display. If you need help, then check out the help file in your theater program.

  (b) open the import file dialog box. In Windows Movie Maker, it is in the part of '"movie tasks', section"vidéo Capture." Browse your files to find the mp3 file you want to import, select and import it. Will import it into filmmaking program but it will not in the video.

  (c) search for the file in your filmmaking program and import it into the film. In Windows Movie Maker, you can drag and drop the file in the position in the window of time movie online, where you want that song to start playing.

  (d) scroll through the timeline until the end of the song. Drag the end of the song in a position to match the end of your slide show. This will be the end of the song at the same time exactly like your slide show.

  (e) read your film completely from the beginning to the end and ensure that everything is with the song the way you want that there. If you are satisfied with the finished product, then export the movie to the right format and the file will be ready to play.

  Method 2: Work with clips in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Reference:--

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker#

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

• ORA-00338: 3 log thread 1 is more recent than the control file

  Hello
  
  I met the error ORA-00338 while performing the recovery of incomplete data:
  
  ORA-00283: cool cancelled due to errors
  ORA-00338: 3 log thread 1 is more recent than the control file
  ORA-00312: wire 3 1 online journal: "+ DG_REDO/dbase/onlinelog/group_3.267.814820795".
  Complete recovery manager.
  
  I made this recovery on oracle 10g, database of ASM.
  
  1. What are the possible causes of this error ORA-00338?
  
  2. This error occurs at the beginning of the media recovery, RMAN is applying logs archived. If RMAN does newspapers "Online REDO" after applying "archived" logs required for recovery or in front of them?
  
  3 rman is how this journal in line 3 is more recent than the control file? How can I me SNA of the journal online & file control in my environment?
  
  Here are some details related to checkpoint scn / change # info. I found in my environment:
  Before recovery:
  view
  v$ datafile: 642935
  v$ datafile_header: 642935
  v database $: 642935
  Journal of v$: 640956
  
  After the recovery fails (ORA 338 :()
  v$ datafile: 640917
  v$ datafile_header: 640056
  v$ database: 640906
  Journal of v$: 640906

  You could try the incomplete recovery has to do only the RESTORE DATABASE with RMAN.
  Then, using the SQLPLUS command line, issue a RECOVER database with the HELP of BACKUP CONTROLFILE until CANCEL. See which he records guests for and monitor messages in the alert.log

  Hemant K Collette