How to order search results web app by weight?

Similar Questions

• I need to display a search form web app, inside the detail of another web application view. Anyone know

  I can't seem to get a search form web app to work within another page of detail web app. Anyone know if this is possible?

  I can view a list of web app; and the search engine works on a standard page. but when I try to load it into another web application details page, I get an error: "page not found". In this case, regarless of whether if I put {module_searchresuts} on the same page as the form or if I redirect the results to a different page.

  Does anyone have any suggestions?

  Thank you, but I needed to get the search form and the results of the Web A app to show inside the detail for the Web App B model... Apparently is not possible. I finished by simply using an iFrame - inase anyone who crosses the same question

• SharePoint 2013 search results Web doest not bring my Managed property

  Hello

  I have a site column named as PubDate added this column in the document library, and then having run full scan mapped property is created in its named as PubDateOWSDATE, then add this column in the property of SelectedPropertisJson Web search results, so the Web search results bring this column. Everything works fine with the Http Site.

  But the question is search results Web part doesnot bring the PubDateOWSDATE to https Site. This https site is the extent of my http site. What was the problem. The same issue occurred in the refinement Panel too.

  Please provide me with assistance for this problem.

  Hello

  I would like you to post your question on the following link:

  Products and SharePoint technologies

  http://social.msdn.Microsoft.com/forums/en-us/category/SharePoint/

• search form Web apps: how to retrieve the value of the data-source type field

  Hello

  My question is:

  How can I retrieve the value of the source field of a web - app data-types when you insert the "form web search apps" on a web page.

  I have a web application that contains fields from the data source of the type. These fields to recover the (data) value of the 'web app' - 'elements of the field' field of another web application.

  When I insert the form

  Web apps

  Web apps-search form

  Name of the Web application

  It displays the fields with the field (ie. string, number) types other than type of field 'data source '.

  (Note: in the mode 'model of list' module of data tags, the fields of the data source are visible).

  What other (alternative) possibilities are there to create a search form?

  Thanks for your help.

  Kind regards

  Carla

  By chance, I came up with this workaround. Of course there are other methods to get your data from a web - app, but if you want to use the 'Web apps search form', it would be a workaround.

  I noticed that the "Web apps entry form" contains all the fields of web applications for your web application (including the fields of the data source).

  It is possible to add the fields to the form of the "Web apps entry form" in the «Web apps search form»

  If you insert the "Web apps entry form" on a blank page, you will see all the fields in your web App including the "data source fields. The names of form fields contain something like.

  "

  If you copy the form field desired (containing the "CAT_Custom_number"), you can paste it on the page in the form where the "web app search form" is inserted.

  In short:

  1. Add the "Web apps entry form" form on the blank page

  2. Select & copy the form fields that contains the 'web app data source field' and its value

  3. Add the "apps Web search form" on page (empty)

  4 paste the items copied from step 3 in the "Web apps search form»

  5. structure of the form with the fields you want, including the SEND/SUBMIT button

  6 structure and style of the search with your own HTML and CSS form

  7. test the form

  Krgds, Carla

• How to exclude search results where the situation is just the right search term was found

  Is there a way to exclude the results of search results where the search term appeared in the path/location of the file?

  For example, I find the term 'XYZ' and am only interested in results that include XYZ in the name of the file (not the path) or in the content of the file.  I want to have the screen of search results that appear only because "XYZ" was found in the path.

  One thing is certain, you're familiar with some of the great powers in search bing or google?  For example, how you can search something like this on bing:

  How to set the folder site: cmdrkeene.com view (s)

  This site: cmdrkeene.com tells your Internet search to look at only one site for these terms.  Windows allows you to do the same thing in areas very choose what to look for.  So for your case, type it like this:

  filename:XYZ

  Or if your file name includes spaces, type it between quotation marks, as follows:

  file name: 'project xyz '.

  This is a file if it has those in the special file name.  This includes a file of type "Project WXYZ" because he always has these letters in it.  If you want to ONLY have these letters, nothing else at all (exact matches only), you can put a ~ after the colon.  That means "file name must exactly", then this:

  file name: ~ 'project xyz '.

  Although it would be unlikely to find anything, because most files have something after the name (such as .doc or something), so you can use a * generic, just like the old days:

  file name: ~ "xyz project."

  --------

  It's probably more that you wanted to know, but the first example is what you :)

• How do you search in the app store

  How you search in the app store, I opened education and see 1321 app, that I have to watch all the app 1321, until I see one I want, where is the mystery word.

  I want an app GPS, how can I know with all of the research store.

  Hello
  to search for an application it is 2 lanes
  1. move the cursor to the right , and then click Search (the first option)
  2. press the windows logo key (and hold) and Q

• How to display detail view Web App on a model?

  I created a web application that displays the addresses on a map.

  When I click on any item to view details, it opens in a blank page with the detailed view, that I created. However, I can't view in the Web site model, with the header and footer. What Miss me?

  Here is the page:

  http://redring2014.BusinessCatalyst.com/Locaciones-red-ring

  Also, how can I Zoom in on the map? It shows a very closed view.

  Thank you

  Ricardo

  Each web application under its first configuration page has the drop-down list to select the default template it uses. Each web app element has also a drop-down list to change the model (it is up)

• How triger "buynow" tag from web apps?

  Hello
  I'm trying to let the user choose product atribute and buynow web app. Anyone know how to make it work?

  The tag only works in the e-commerce module.

  So the solution is to add the module of product within the web application element.

  

  Ensure that you have to buy now tag applied to the product view...

  

  So that when the system displays the product, you will have the button as required.

  

  I hope it's useful!

  -Sidney

• How to add a 2nd web/app svr?

  I'm new to Peoplesoft and I FP2 HCM9.1 PeopleSoft PeopleTools 8.52.06 work environment built among the latest models of LMOS.
  
  I am running the DVS web & application on the same VM. Now, I have to create another web + app svr VM to test the configuration with a 3rd party balancer load. Can simply repeat the steps that I've done to create the 2nd web + app svr VM?
  
  Any reference orientation or documentation is appreciated!
  
  Kind regards
  Holly

  Of course, you can have as much app/web VM as you want the same database VM.

  Can simply repeat the steps that I've done to create the 2nd web + app svr VM?

  Yes, absolutely.
  App/web VM is nothing more that a "hardware", then you can multiply the given them a unique IP address on your network, link to your back-end database, and everything should work fine.

  Nicolas.

• How to bookmark search results

  I know that there must be an obvious answer, but I can't.

  I have a search form that passes the form variables.  Is it possible for the end user to bookmark the results page because variables are not in the url?

  Not really.  Generally the best practice for any search engine is to always use the method = "get" instead of method = "post". In this way, the URL search results can be bookmarked, e-mail, etc..

• Not able to order search results

  I use contributor search advanced to get of the assets, but I can't order them by date.

  Can I change configuration?

  Hello

  I tested the Patch 8 and the problem persists, also according to bug notes, the issue has not been set. It will be added in a future update.

  Good news is that there is a solution for this:

  
  

  Note: At that time, only the column changed sortable in the contributor user interface
  -The name column is sortable by default.
  -The other columns in the search for contributor UI are results are not sortable after Patch 6 (for example, Type, location, Tags).

  To resolve this problem, you must do the following:

  1. switch to update the IndexSourceMetaDataConfig table with the names of the Lucene fields you want made sortable.
  -To do this, follow these steps:
  (a) connect to explore Sites
  (b) update the table IndexSourceMetaDataConfig in the following way:
  (c) to identify the line where the name is 'Global' and update the column sortablefields for this line, add the field you want to have sortable.
  -for example if you want the name and date of update (updateddate) in lucene be sortable, you must set the sortablefields column name; updateddate; like the following:

  ID	name	uniqueid	defaultsearchfield	searchenginename	sortablefields	urlfielddescriptor	properties
  1406218225477	Global	ID	DefaultSearchField	Lucene	name: updateddate;	963/891/global.txt

  (d) changes recorded in the site Explorer

  2. the Assettypes should be reindexed once the IndexSourceMetaDataConfig table is updated.
  -To do this, follow these steps:
  (a) log into the Admin user interface
  (b) under the Admin tab, expanded the node search, double-click on configure global search
  (c) select reindex option, select all types of assets and click OK.

  Once the assettypes were re-indexed, additional fields will now be sortable in the results of Search Assistant UI.

  Note: For specific index of active type (used in the advanced search), you must update the line in the IndexSourceMetaDataConfig which corresponds to the current index of the specific Type in the same way as described above and re-index the active index Type specific.

  Please note that the application of this workaround you will be responsible to maintain, like any customization.

  I hope this helps.

  Guillermo.

• I WANT TO SEE INSTEAD OF THE SEARCH RESULTS WEB ADDRESS.

  I don't see the website when I click on a link as search terms. How can I change this?

  Are you clicking on a hyperlink on a page? Or is it in the bar when you click on a suggestion to address? Using a search plugin?

  A screenshot would be useful to explain the context.

• How to open search results in the same window in Firefox always done before the last update 22

  Before the last update, on that I would do a search let say Google and when I found what I wanted and clicked on, that the window would turn to the result in this window, now it opens a new window. Another question is I noticed when I have gmail open in a window and open another window that result is displayed, and then switches to the original which was open, modified window and the new window is reduced in the bottom taskbar, and I come back to open it again. Whether measures should be taken, please list them.

  Hi years.1, Flash is used by many sites to play videos and audio. It is also used by some sites for menu or the overall presentation systems. Some sites also use Flash to downloaders of files.

  Firefox in general will let you know if a site needs a plugin to display all of the content, but you may also see a message on the site. These messages are not always specific to Flash, but can sometimes say that JavaScript is disabled or else referring to the problem.

• How to restrict search results to photos only?

  How can I limit a search of my hard drive to the photos only? I need to make a backup of a portable D H and don't want a lot of other stuff too. I need to clean this computer and have 10 years of photos somewhere. Please help quickly-thanks!

  *.Gif and *.jpg research

• Web App search results to display the TASK parallel library instead of the list view

  Is it possible to get the search results Web App to view a presentation BPD instead of the standard list view?

  If it is possible the call would go on the form or on the page of results? (currently, use the same results page for several web applications.

  Thank you!

  Not quite sure what your after.

  You can send the results of research to a custom page, I think you did that? This page can have its own model.

  The module itself for the search results:

  {module_webappsresults, bkp, resultsPerPage, hideEmptyMessage, rowLength, sort}

  They are key elements where bkp being true means that search results will use the backup of the web application on the main list.

  If you apply the rule of custom template by adding a space and a model = "PATHTOFILE", you can specify the search results to use a custom template.

  http://helpx.Adobe.com/business-catalyst/partner/using-custom-templates-modules.html

  None of this is what your after?