How to overthrow the State of my computer say 3 weeks back

Similar Questions

• How to save the State temporarily, and then pull it out back?

  We are developing an application on Jdeveloper 11.1.1.6.0 BPM. I have a requirement to save the current state(partially entered) of a web application and temporarily, then recover with the same State when it has connection the next time? How can achieve us?

  Make the changes you want in the form-> click on the drop-down "Actions" (the one on the form) and not one above the task list-> click on "Save" and your changes will be saved.

• Satellite L500 - how to restore the menu "repair your computer"?

  Hello world

  I have a laptop Toshiba L500, Yestaday I tried to restore the system to the factory settings (by pressing F8 at startup high and choose "repair your computer"). In the system has been installed almost, but at a stage of installation drivers to read memory cards and similar - there was a failure (the blue screen and need down) - after that - Windows 7 is not loaded. parsing errors (by means using a floppy disk to another Windows 7 install) says that the registry is damaged, cannot repair.

  but the main problem - when you press F8 at startup upward - there is no MORE menu 'Repair your computer' (!) . It is impossible to start Windows 7 predefined. So there's the hidden sector containing Windows predefined (I saw when loading a disc of hatch - Total order could start - and hidden sector was visible). All files in drive recovery HARD necessary are also available.

  How to restore the menu "repair your computer"? or how it is possible to start Windows predefined without pressing F8?

  > Hidden article exists, I saw it, there are all the files recovery HARD drive (which was in the laptop after buying), but I can't begin to recover Windows because I don't have menu not 'repair your computer' to start the laptop. He disappeared...
  Of course, the flag in the Advanced Start menu seems to be deleted and therefore drive recovery HARD option isn't available anymore.
  Probably the partition has changed.

  But in case of HARD drive recovery files are still available on the recovery partition, you can try to create the USB support of own recovery using of workaround:

  [How to create a recovery media USB flash drive to the valorisation of the ISO images - or (DVD) discs | http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]

  I guess that this directive should be very useful.

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.

• How to extend the time that your computer stays on without activity

  How to extend the time that your computer stays on without activity?

  How to extend the time that your computer stays on without activity?

  Start button > in the search box, type power options > press the Enter key > left column > click on choose when turn off display > selections for battery and plugged inare. Click on the pointer, and you can choose how long. It may be 1 minute forever. Take that seek you. > click save changes when done. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to activate the hibernate on my computer

  Dear Sir

  How to activate the hibernate on my computer.thanks

  Solution - 1:

  To allow the Hibernate, follow these steps:

  Click Start and type cmd in the box start the search.
  In the search results list, right-click Guest, and then click Run as administrator.
  When you are prompted by user account control, click on continue.
  At the command prompt, type powercfg.exe / hibernate on and then press ENTER.
  Type exit and press ENTER to close the command prompt window.

  To facilitate the unavailable Hibernate, follow these steps:

  Click Start and type cmd in the box start the search.
  In the search results list, right-click Guest, and then click Run as administrator.
  When you are prompted by user account control, click on continue.
  At the command prompt, type powercfg.exe / hibernate off the coast and then press ENTER.
  Type exit and press ENTER to close the command prompt window

  Solution-2

   

  To have the computer automatically hibernate after specifying the Minutes: -.

  Click Start

  Power of type in the search field.

  Click on Power Options

  Select the power plan that is already in use.

  Then set the time of hibernation at your convenience.

• How to get the State of the button?

  I want to know how to get the State clicked the button? If it is clicked State or State clicked?

  For ex: I have the following code...

  {( < composants: IconButton id =»bold_btn"largeur =»22" icône =»@Embed('/assets/bold.png')"click ="onBoldClick ()"enabled =" {}this.loadCompleted}"toggle ="true"/ >

  How to find if the "BOLD" button is checked or not?

  this.bold_btn. ???

  Please mark

• How to make the State "out-of-box' again on my Satellite L653-12J

  Hello

  I have been in charge of research and following the instructions but all have failed.
  I'm selling my Toshiba Satellite computer laptop L653-12J with Windows 7 and I would like to clean the hard drive of all the data added to have it back to its out of the box state.

  Please advise me how?
  Thanks and regards,

  Kamal

  Hello Kamal

  How to install the recovery image, which you can read on follow Toshiba document -.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  It works for you?

• How to improve the performance of your computer and free up space.

  Original title: the unwanted temporary files of windows is at the origin of the problems of proformanace

  According to a check of problem: the unwanted files temporary windows could take to improve the performance of your computer and free up space.

  Can anyone help with this simple problem.

  Angelo

  Hi Angelo,.

  1. which edition of Windows are you running?
  Example: Windows 7 Professional 32 bit.
  Please follow the below link to clean unwanted temporary files.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
   
  Microsoft at home.
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=MDw_uUbCmMl
  Make slate: how to remove the unwanted files and programs
  http://www.Microsoft.com/athome/Setup/CleanSweep.aspx#fBid=MDw_uUbCmMl
   
  See also,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/performance-improve-slow-system-slow-startup/d0fd7b04-CD3c-4CE0-A9D6-60b6221171f0?msgId=cc2624b0-1972-4EC6-B1A4-f46140d44401
  I hope this helps.

• How to remove the trash on my computer dell laptop latitude who has windows xp?

  I am an elderly person not at savvy, computer then pls forgive me for asking what may seem like a stupid question. I need to know how to clear the trash on my laptop. It's a Dell latitude Windows xp. And I thank you all in advance for any help rendered on this!

  There are several possibilities.

  If the file is on a network resource or a removable device like a USB key, just delete Deletes without going through the trash.  It sounds like what is happening in your situation (which is your "DVR photo/video plug and play" device?).

  Look carefully at the message when you press the delete key - he probably said, "Are you sure that you want to delete 'Filename'?" rather than "Are you sure that you want to send 'filename' in the trash?

  Another, less likely, causes:

  If the file is too large, you should get a message saying that the file will not fit in the trash and delete will delete everything without moving to the trash.  I don't think that I've never seen a 'too big' file is to be deleted without the warning message.

  What is "too big"?  By default, the Recycle Bin is set at 10% of the size of your disk (partition).  If you go into my computer, you will see different drives displayed.  In general, you will use 'drive Local (c) '.  If you right-click on this icon and select Properties, you will see the used space, free space and capacity.  Your trash for this default player is 10% of the 'capacity' - but with a catch: he will not exceed 3.99 GB no matter how great the drive.

  You can see the actual amount of the space allocated to the trash by clicking right on it and then select Properties.  Depending on the number of drives in your computer, you can see several tabs here, including a 'Global' tab and one for each individual unit.

  A more even less likely cause:

  In addition to size, the Recycle Bin properties tabs also have a box that says "do not move files to the Recycle Bin.  Delete the files when they are deleted immediately.  I doubt that you have this box checked, because then the behavior you describe should occur for all files, not just some of them.

• How to change the bios of my computer?

  I want to change my computer's bios so that it does not seek to boot from an external drive.  How do I do that?

  1. read the manual of your computer.

  OR

  2 turn off your computer.  Turn on your computer and monitor very closely the screen.  You should see a message go quickly indicating something like "Press F1 to enter Setup".  Turn your computer off again.  Turn it back on and immediately start typing the key that you have identified.

  OR

  3. provide the brand and model of your computer, and a person may have information for you.

• How to uninstall the Canon of my computer software?

  Title: need initial help to uninstall the software

  I have a conflict with my Vista and Canon 4200F scanner and now I can not uninstall the software.

  the conflict message says it's because of something called knlwrap.exe. How to uninstall OmniPageLE and the rest of the software?

  Hello

  1. What is the full and exact error message?

  2. when exactly you get the error message?

  I suggest you to see the links and check if it helps.

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  See also:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  The link also applies to the Windows 7 operating system.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, (http://support.microsoft.com/kb/322756/) see link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• HP635: How to reset the password of bios computer hp635 laptop

  How can I reset my password bios computer hp635 laptop while I train 3 times off the wrong password, I get the email with the code system: 96322628 if there is any solution please help me!

  Hello

  Use the code to reset the BIOS below

  29080208

  Or generate it from the link below

  http://BIOS-PW.org/

  1. Use the posted above unlock code to access the BIOS
  2. Disable all passwords that are enabled
  3. If current password request - type the unlock code
  4. New password, simply press the ENTER key
  5. Repeat the same thing to check the password column.
  6. Then exit the BIOS saving & exit option to save the changes.

• I would like to know how to get a debugger and how to increase the memory on my computer of mocarosoft 7 HP

  I tried to find information on the question of the debugger, but I'm at a total loss about how to increase the memory of the computer.  Please help me, because I have school work on this 'thing'.

  The Windows debugger is included in the SDK

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8279

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463009.aspx

• How to reset the State of package variables in all sessions connected (without requiring a disconnection and a connect) if they are reset in one of connected sessions.

  
  Hi people,
  Need help, the example requires that the value of packet data 'g_var' must be updated in the session/s connected everywhere without the session/s to be disconnected and reconnected.
  Here's the scenario:

  I created a table my_table having the pair name / value.
  A variable with global package "g_var' in his body and a get accessor method to access g_var variable from the outside world.
  This variable g_var is initialized within the block of the entry into force of the package and retrieves the current value of the variable from my_table.
  When I update the value in the table a trigger on my_table would reset the State of the package and therefore g_var to the most recent value in the same session
  All is well so far since the change in value is reflected in the current session, but if I've already connected session/s
  and I'm trying to retrieve the value of "g_var", it is not updated in already connected sessions and remains the same before the update.
  Can U help please how can I update this value in a session/s connected without having to disconnect and reconnect.
  because if I disconnect and reconect the existing sessions, it seems to show the updated value.

  Thanks in advance.

  Kind regards
  Gaurav Rajput

  Here are the Scripts:

  
  drop table my_table;
  create table my_table
  (
  my_variable_name varchar2 (100),
  number of my_variable_value
  );

  create or replace package my_package as
  Function get_g_var return number;
  end my_package;
  /

  create or replace package body my_package as
  number of g_var;
  
  Function get_g_var return number is
  Start
  Return g_var;
  exception
  while others then
  lift;
  end get_g_var;
  
  procedure init (my_passed_name varchar2) is
  Start
  Select my_variable_value in the g_var from my_table where my_variable_name = my_passed_name;
  exception
  while others then
  raise_application_error (-20004, "I got an error during Init");
  end init;

  Start
  init ('$'); -This is a call to time when the package is loaded into the memory of session
  exception
  while others then
  raise_application_error (-20003, 'Error in my_package');
  end my_pACkage;

  /
  create or replace TRIGGER my_trigger
  BEFORE DELETE OR UPDATE
  ON my_table
  FOR EACH LINE
  declare
  number of my_ret;
  Start
  DBMS_SESSION.modify_package_state (DBMS_SESSION. RESET);
  exception
  while others then
  lift;
  end my_trigger;

  /

  -It is initially set to null
  insert into my_table values ('DOLLAR', 62);
  commit;

  -test value for first time to package loading (62 views)
  Select * from my_table;

  Set serveroutput on

  declare
  my_variable varchar2 (100);
  BEGIN
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  -run the same block of end to start in another session it shows 62. All is well so far
  -check if the value after the update in the same session (shows 38), also check in another before the connected session as well (shows 62 and not 38)
  Update my_table set my_variable_value = 38 where my_variable_name = "DOLLAR";
  commit;

  Select * from my_table;

  Set serveroutput on

  -It displays 38 in this session, but there in an already connected session 62 and only after you log out shows 38
  declare
  my_variable varchar2 (100);
  BEGIN
  -my_variable: = my_package.g_var;
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  Package variables are stored in the private memory (PGA). The value is not visible in the session. A package variable is therefore not approach appropriate to your problem. You can look at in the context of the Application, as Solomon has said.

  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/app_context.htm#CIHFJHCG