How to present the four volumes of SAN 5720 Broadcom dual port NIC?

Similar Questions

• How to reset the System Volume Information folder?

  I would like to know how to reset the System Volume Information folder to empty all the potential viruses.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  

  I use cleanmgr /sagerun:1 of the dialog box run when you use a switch.

  However, I usually just use these instructions.

• How to reset the disk volume quota hard C

  Original title: Win XP volume quota

  I'm a partitioning of a HARD drive with win XP service pack 3.

  How reset the disk volume quota hard C, I can not get access to quota controls?

  Size of the disk, it's all the 100 GB, I can see on C is 54 GB. you will need to access the other 50 GB.

  1. What do you mean by "unpartitioning" a disc?  If you mean that you remove some partitions on a physical disk in order to have more space in a remaining partition, you should know that you will not be able to extend the partition system (usually c :)), even if there is unallocated space on the disk unless you use a third-party disk management tool.  Windows XP cannot do with its native tools.

  2. are you sure you really want to use disk quotas?  It would be unusual in their homes.
  2B. which means you that you cannot 'access' to quota controls?  You see the tab "Quota"?  Are you logged on as a user who has privileges?

  3. where are you looking that see you C 54 GB but think you should see 100 GB?

• How to consolidate the two volumes?

  Friends:

  My catalogue "somehow" has become divided into two volumes A and B.  A 60 000 and B has 5 000 files.  How to consolidate volumes?  [I want A to have all 65 000 images]

  (Later, I want the other volumes being simply a bakup)

  I want to add volumes to A and B are my Master Library, with each divided into folders for years and each year, there are folders for each event.  Both volumes have the same folder hierarchy.

  Please share your strategy and enlighten me.

  1 million thanks!

  MIGS

  I see. The situation that LR does not display files and/or images are on the hard drive even occurs because changes were made outside of LR.

  LR is depebdent on its database (the ' catalogue') and not just 'see' what is on the hard drive. When you change files of the image outside LR won't 'see' the new situation - so that you get something on your hard drive and another thing in LR.

  Because LR works this way, it is best that you do all of your image management - movement and rename folders and images - LR only. Then, Lr will always display the correct situation.

  Now to your situation:

  You say that your readers A und B have exactly the same content. So - at the level of the hard drive - a single disc is a backup copy of the other. It's OK because you want a backup of your images.

  So don't change anything on your hard drives.

  For LR you must decide: do you want to have a set of images - those on the drive or disk B - LR?

  Or you want to have two identical sets of images in LR?

  LR is not designed to actually manage duplicates - files that have the same file name. It's OK, as long as the duplicates are in different folders or on different drives.

  This is why I suggest that it is easier if you have only a single drive in LR.

  If you choose to have only the readers in LR then click photos B (the one with only 5000) of disk, and select .

  If you want both of your drives in LR, then click your player B (the one with only 5000 photos) and select . Synchronize the file will import photos (and files) that are on the disk, but not in the LR and delete photos (and files) that are not on the disk.

  WW

• How to control the sound volume on a cradle streaming sound?

  Hi all
  
  I have a MovieClip "Animation" with its added as a Streaming. I also created a SiderBar Volume I want to use to adjust the volume of the sound on my Flash.
  
  The SliderBar Volume work well and I need to assign some how the volume for the volume of position (value of). I was wondering if anyone can tell me how I can do this on a sound which is timeline based?
  
  Thank you very much and have a great day.
  
  Khoramdin

  > The SliderBar Volume work well and I need to some how affect the volume of the
  > (value of) the volume of the position. I was wondering if anyone can tell me how I can
  > about a sound which is timeline based?

  It's easy - no one will be able to tell you a way to do it.
  Sound control is very limited when you use the timeline sounds. That's why
  It's great to have the Sound class, which gives you a lot of methods
  and properties to deal with sound. One would be setVolume(), which
  allows developers to change the volume of the sound when running.

  ---
  Christian Scholz-Floter

• How to set the recording volume in itunes.

  A few songs to read the normal volume in the car. Others, I turn the way car volume up.

  In addition to Sound Check. Have you already discovere, you can change the volume level individually for each song.

  Select the track, command-I to open get the Info window. Switch to the Options tab, and then adjust the Volume slider.

  Not all apps honor this setting, so test with your workflow first, before spending too much effort on it.

• How to download the program Volume control for the taskbar

  Where can I get the installer of the volume control for my taskbar. I've triedControl Panel >sounds and Audio devices > check "Place Volume in the taskbar icon .

  When I check the box for "place volume icon in the taskbar" it gives me an error and says "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it, use Add/Remove programs in Control Panel.

  Where can I get the program from?

  You mention that your netbook is HP. Most of the HP products have a recovery partition. If this is the case:

  -Click Start-> Run

  -Type in cmd

  -Type in the following, substitute the C:\ and D:\ readers with your partition recovery and partition system respectively:

  Expand c:\i386\sndvol32.ex_ d:\windows\system32\dllcache\sndvol32.exe

  -Press enter, and then type:

  Expand c:\i386\sndvol32.ex_ d:\windows\system32\sndvol32.exe

  -Type exit and press ENTER.

  Your Volume control should now be restored. You can check this by opening the sound and Audio Control Panel devices and by checking the box to the volume icon to Place in the taskbar.

  If your problem is not solved or there is no such thing as a recovery partition after the return

  Hope this helps

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to increase the speaker volume?

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  On Wednesday, April 10, 2013 23:21:42 + 0000, JRHoot wrote:

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  Have you set the physical volume on the speakers control
  themselves?

  Ken Blake

• Control bar of the unknown Volume suddenly appearing on desktop Dual-Boot computers.

  Original title: 'Mystery' Volume Control Bar sudden appearance on desktop Dual-Boot computers.

  Good day, community:

  I'll do my best to make the question as concise as possible.  This is a real new for me.

  I dual-boot Windows 7 Pro & Windows 8.1 Pro on a 64-bit computer.  Each operating system is on another HDD (mechanical).  Yesterday, a control Volume unsourced bar began to appear on each of the separate workstations.  On the DT of Win7, this bar is displayed in the lower right region and hovers over the SysTray speaker icon.  On the DT 8.1 Win, it appears in the box to the upper left, similar to where the real system volume control appears when it is called.  Each of these 'mystery ' control bars will appear - and then disappear for a period of time.  Each control bar is flooded-out for the volume level of 100% and stays there.  Right click shows no drop-down menu to display the properties.  The control rods cannot be manipulated to adjust the volume levels.  When I view the actual systems Volume mixer and attempt to manipulate the volume level bar will adjust briefly but then floods automatically save the level of 100%.  I ran my anti-virus - full system scan - all readers - update Avast for free - and malware kit & root scan - MalwareBytes - but nothing does.

  The following may provide a clue.  The last program I have installed under the two O/S has been steam 'The Orange Box'. All components have been updated.  I disabled the Steam Client to bootloader program in each operating system using msconfig/startup and restarted.  The 'mystery ' Volume control bar continues to appear in the same areas described above.  I intend to describe the same question on the steam Forum community.  Thank you all for your time.  Any help/suggestions would be greatly appreciated.

  Hello Neal,

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  Looks like NVIDIA High Definition Audio driver interferes with IDT High Definition Audio. Uninstall and reinstall the audio driver can help.

  Please let us know the results.

• How to present the smartphone version of the app playbook?

  Hello

  I did my playbook application blackberry smartphone version.

  How can I present to the world of the app?

  My version of the Playbook is 1.3.4 and my smartphone version 0.0.1

  both are approved (see below) but I can't see the new smartphone version 0.0.1 for SALE on App World.

  What I am doing wrong?

  Help, please

  Thank you

  Afonso Tyagi

  

  I can see it. Have you tried to open appworld using a phone?

  

  App playbook: Car accident 

• Does anyone know how to present the LUNS in a Dell Equallogic to vSphere?

  I have configured the Dell Equallogic SAN, and now I'm ready to present LUNS to vCenter. I want software iscsi allows you to configure...

  EqualLogic PS Series and vSphere

  and this is my fight with MPIO.  It may also be useful: http://communities.vmware.com/thread/236359?tstart=0

• Satellite P500 - how to disable the touchpad volume control

  Hello

  I want to reduce or turn off the "beep" sound when I adjust the volume using the touch buttons (under the power button).

  I can't find any info on this anywhere.

  Open Toshiba Assist > Optimize > Toshiba hardware settings > settings button > button beep = feature set it to disabled.

• How to decrease the output volume of the .wav file to a speaker attached to the output NI 9263 module

  Hello

  I found an example of http://zone.ni.com/devzone/cda/epd/p/id/4182 and edited for my purposes. On this basis, I have 16-bit mono speech files with sampling rate of 16 kHz for a speaker attached to the output NI 9263 module. However, this forum is without volume control and the result is extremely strong. I have attached photos of my diagrams below.

  NDS read Wave File.vi returns a 1 d mono 16‑bit whole array. I multiplied this table by a command button, so I could adjust the constant which I multiply with the table 1 d as I thought that the size of integers are related to the amplitude of the signal. However, reducing the constant only reduces the quality of the word and is still very strong.

  Is it the right approach to reduce the volume? And if not, what? Thanks in advance

  Yawei7 wrote:

  I thought that the size of integers are related to the amplitude of the signal.

  It's quite right...!
  And your approach is perfect...!

• How to get the (green Volume icon) on the LCD screen.

  My Green disappered from my ecran.* LCD volume control icon * not that the taskbar * sound here or "grayed out" on the bottom right of the task bar, it is also. Referring to the one that appears on the LCD when you set the volume, (WITH BARS of COLOR GREEN) I have T - 60 IBM, running Windows XP Pro. Any help grateful.

  PROBLEM SOLVED:

  Anyone who may have this problem, go to Lenovo support & update driver Hot Keys... HAS WORKED... YAAAAAY!

  Hi Splanfix,

  When the volume icon doesn't disappear?

  I suggest you to reset the settings of the monitor by following the manual supplied with the monitor.

  Otherwise, contact the manufacturer of the computer for assistance:

  http://www-947.IBM.com/support/entry/portal/overview/

  Hope the helps of information.

  Icon appears when the volume control upwards or downwards, on display at the screen, do not have a manual, it's a laptop IBM T60, Windows XP operating system. No manual not supplied with purchase

  PROBLEM SOLVED:

  Go to Lenovo support & set to hot key driver updates...

• How to do the same volume between songs?

  Hey,.

  Well, I'm having a problem with the volume. Long story short: when I play a quiet song I need to increase the volume. When it changes during the next song, it becomes extremely strong, so I have to turn down the volume. It will continue like this, with me having to hang around the stereo. It's really annoying when the use of these songs on the player windows media in a bar or night club. I tried a few things in the improvements on windows media player, but cannot find the right thing.
  Please help ASAP!

  No guarantee... but the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Mp3gain
  http://free-software-downloads-Guide.blogspot.com/2010/04/freeware-MP3Gain-MP3-volume-normalizer.html