How to prove the historical use of vpn session ASDM Anyconnect?

Similar Questions

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• How to identify the fonts used in text format?

  How to identify the fonts used in text format?

  Hi DSB.

  Open the document in Reader, go to the menu file-> properties, then click on the tag are. You will see a list of the fonts used in the document.

  Another option is to copy the text and paste it into MS Word, where you can simply move your mouse over the text to display the name of the font.

  Kind regards

  Nicos

• How to know the database uses pfile or spfile?

  Hi guru
  
  How to know the database uses pfile or spfile?
  
  
  
  Thank you

  Thank you for this question of doc!
  Please type in sql * show spfile parameter.
  If it is empty, you do not use a spfile.

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• Help, how to query the database using pagination

  Hello
  
  How to query the database using paging for large data.
  
  any API for this?
  
  Thank you in advance!

  Hello

  You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

  John

• How to change the fonts used to display the list of emails on the homepage?

  Looking at my Inbox or other e-mail folder, the font used to display the list of emails in folders - gives me a headache.

  How can I change this font? Is there an add-on? Something in their profile?

  Ideally, I would like to change the background color of white also. (Perhaps the color on this page where I ask the question. "It's easy to read, the font and the color!)

  I've been a programmer in a past life, so I'm tech abreast. I am new to use Thunderbird (I used FF for several years.)

  Thank you!!

  Yes, to change the font, you can use this addon:

  • Theme font & size changer

  Also, try to use themes:

  • https://addons.Mozilla.org/en-us/Thunderbird/themes/
  • https://addons.Mozilla.org/en-us/Thunderbird/complete-themes/

• How to hide the images used in imovie 10.1.2?

  I am a new user of iMovie and use the latest version. How to hide the photos that I already added to the film? Moreover, that mean the purple and orange lines on the photos? Thank you!

  You can not hide, but the orange lines at the bottom of the clips in the media pane show what parts of clips have been used in the scenario, if you can easily avoid reuse them if that's what you want to do.  The purple lines at the top of some parts of some clips show moved excessive (which cannot be stabilized).

  Geoff.

• HP pavilion g6: how to restore the system using a newly installed hard disk recovery disk

  Hey, everything started when I downloaded the new Windows updates after a long period, after downloading the updates, the blue screen appeared, I restarted my laptop and since then, I get a black screen with error oxcoooooe9. I tried to run a test drive and it came with the 0303 error which means that my hard drive needs to be replaced, so I am a new hard drive and the fixed but now when I am trying to restore the system using the recovery disks that came with the laptop, it says incomplete restoration. Kindly help how do I get my system in working order. Also, I tried all 3 options on the recovery disk, still getting the same message. Help, please.

  Hello @Anky11,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the system recovery and he wanted to help!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use these links to help you find the product and the operating system:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, please consult the following documents, as they can help solve the problem for you:

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  HP computers - resolution of the problems of recovery HP System (Windows 7)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• At the point of the map, how to change the font used

  Hello

  I want to change the font used in the bubble in Mappoint. I don't talk about boxing of text or the text size, I just want to change the police and use "Microsoft sans Serif".

  Is this possible?

  How to do?

  I used Windows 7,

  Best regards

  You can ask in the following forum because they are more likely to have relevant experts:

  Highway, streets and Trips, MapPoint .

• How to analyze the files using Lexmark 2600 Series

  To the right:

  I have a Lexmark 2600 Series 3-in-1 printer. It is supposed to be able to scan. However, I can't figure out how to parse the files and I've lost the installation disc. However, the printer is already installed on my computer. I can't analyze. Can someone help me on how to scan files with this printer? Or, is there something I need to do first before that I can use the scanner fuction?

  Hi Xnygga,

  You will need to go to the Lexmark Web site to download the latest software/drivers for your scanner:

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US & segment = DOWNLOAD

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to move the ASA of IPSEC VPN via UDP to TCP

  I have a client who has a remote desktop with 2 PCs than VPN in to their location of HQ. Previously, two computers where in different places now that they are in the same place. Both PC's are able to successfully establish a VPN connection to the CA by using the Version of the Client VPN Cisco 5.0.07.0290, but only 1 system actually passes the traffic and is able to access the resources at Headquarters.

  I asked another engineer, and they said ' you must configure IPSEC over TCP or use Anyconnect to have multiple clients behind the same PAT' public ed remote ip address... ". ». I would go with IPSEC for TCP connection, so I won't have to uninstall the old client and go through the process of installing the AnyConnect client. Here is the configuration of the ASA 5505 thanks in advance for any help.

  CLIENTASA # sh run

  : Saved

  :

  ASA Version 7.2 (4)

  !

  hostname CLIENTASA

  domain client.local

  activate 72LucMgVuxp5I3Ox encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP x.x.x.x where x.x.x.x

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain client.local

  standard SPLIT-TUNNEL access list permit 192.168.1.0 255.255.255.0

  outside_in list extended access permit tcp any any eq smtp

  outside_in list extended access permit tcp any any eq www

  outside_in list extended access permitted tcp everything any https eq

  access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 10.99.99.0 255.255.255.0

  pager lines 24

  Enable logging

  recording of debug console

  debug logging in buffered memory

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  pool local IP VPN-10.99.99.100 - 10.99.99.200

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 523.bin

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  public static tcp (indoor, outdoor) interface www 192.168.1.2 netmask 255.255.255.255 www

  public static tcp (indoor, outdoor) interface https 192.168.1.2 netmask 255.255.255.255 https

  public static tcp (indoor, outdoor) interface smtp 192.168.1.2 netmask 255.255.255.255 smtp

  Access-group outside_in in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  AAA authentication enable LOCAL console

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp - esp-md5-hmac

  Crypto dynamic-map VPNDYN 1 set transform-set esp-3des

  vpn ipsec dynamic VPNDYN 65535-isakmp crypto map

  vpn outside crypto map interface

  crypto ISAKMP allow outside

  crypto ISAKMP policy 100

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet 0.0.0.0 0.0.0.0 inside

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 5

  Console timeout 0

  dhcpd dns 192.168.1.2

  dhcpd outside auto_config

  !

  des-sha1 encryption SSL rc4 - md5

  VPN-POLICY group policy interns

  attributes of VPN-POLICY-group policy

  value of server DNS 192.16.1.2

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value of SPLIT TUNNEL

  admin PWpqnmc2BqJP9Qrb encrypted privilege 15 password username

  password encrypted vpn2 ZBNuNQsIyyMGbOB2 user name

  username vpn3 encrypted password 15c4LrPNccaj1Ufr

  vpn1 fsQgwXwSLokX6hEU encrypted password username

  tunnel-group CLIENTVPN type ipsec-ra

  attributes global-tunnel-group CLIENTVPN

  address VPN-POOL pool

  Group Policy - by default-VPN-POLICY

  IPSec-attributes tunnel-group CLIENTVPN

  pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:41bd95c164a63bb26b01c109ab1bd68a

  : end

  CLIENTASA #.

  Hello

  You can try adding

  Crypto isakmp nat-traversal 30

  And test connections

  I think that you need to add to use the TCP protocol

  Crypto isakmp ipsec-over-tcp 10000

  You will also need to change the Transparent tunnel setting on the profile of Client VPN software to use TCP instead of option of NAT/PAT.

  -Jouni

• How to find the certificate used to sign app?

  There is a site that uses DBsign UWS to validate personal certificates on a smart card.  I found myself breaking this feature by moving the default Java truststore so I could create a new one with a few roots/split AC that I trust (I have no desire to let apps signed by China, Russia, Turkey and countries spelled with heiroglyphs).  Now, my browser thinks that the UWS is self-signed and rfuses to run it.  I need to find the certificate used to sign this app to see what cert (s) sign, so I can add them to the truststore.  How can I find that?

  To answer my own question:

  jarsigner - verify - verbose - CERT DBsignUWS.jar