How to reduce the time to backup my ReadyNAS 204 Server?
I use my ReadyNAS 204 Server backup storage. It takes about 10 hours to backup my ReadyNAS 204 server. There are about 400 GB of data on my server. Is it possible to shorten the time of backup?
Make sure they are both connected to the same switch or the modem. If they are not, doing so is expected to accelerate dramatically.
Tags: Netgear
Similar Questions
-
HI friends,
I work with Owb, I need a help from you all.pls help me as soon as POSSIBLE... (i.e) when I run the map in the center of control, nearly 3-4 hours.sure mapping I know there huge data in the database, but can we reduce the time for execution of these mappings.. pls let me know...
Thank you
RajusenDeploy the mapping, then run it.
-
How to reduce the time of triggered output
Hi, I am using PCI6111 to run some Matlab commands with external triggers. The meter is used for counting of triggers. I tested the delay between the edges of the relaxation and execution of analogue output and has found has fluctuated around 2 ms to Ms 6 is it possible to reduce to a minimum the time? Thank you!
Matlab codes are:
% meter Installer;
s = daq.createSession('ni');
s.addCounterInputChannel ("dev1', 'ctr0', 'EdgeCount'");
s.Channels (1). ActiveEdge = 'falling ';
Get (s.Channels (1), 'Terminal'); PFI8% return% Add ananlogputput to work as new triggers;
S1 = daq.createSession('ni');
S1.addAnalogOutputChannel('dev1',[0],'Voltage'); AO0%%
VolumeNumber = 400;
FramePerVolume = 2;
TotalTrigger = VolumeNumber * FramePerVolume;%%
VaOn = 2;
VaOff =-2;
outputSingleScan (s1, [VaOff]);
%%
II = 0;
s.resetCounters;
NN = s.inputSingleScan;
Nlast = 0;
then NN<>
NN = s.inputSingleScan;
N = mod(NN,2);
If N == 1 & NN == Nlast + 1;
DISP (NN)
outputSingleScan (s1, [VaOff]);
Nlast = NN;
else if N == 0 & NN == Nlast + 1;
DISP (NN)
outputSingleScan (s1, [VaOn]);
Nlast = NN;
end
end
DISP('Done~')
-
How to reduce the time required for INCLUSION
Hello
I have a vision SV which holds about 33 000 records, but when I try to insert the number of records in a table SV_T, taking huge amount of time that is 2 to 3 hours.
What could be the reason, please provide your feedback.
Also, I use the remote application for these operations.>
Hello Chris and welcome to the forums.
I have a vision SV which holds about 33 000 records, but when I try to insert these
number of records in a table SV_T, taking huge amount of time that is 2 to 3 hours.What could be the reason, please provide your feedback.
Also, I use the remote application for these operations.
This is a technical question and you should go here and there [url https://forums.oracle.com/forums/forum.jspa?forumID=75] ask here.
Note the name of this group in particular - in particular the bit in brackets.
Forum: Suggestions and comments from the Community *(Do Not Post Product-Related Questions Here) *.Please also take the time to read the FAQ of the Group and the message by BluShadow
at the top of the list of positions in the group SQL and PL/SQL .Help us help you.
HTH,
Paul...
BTW, please close the thread here.
-
NAC: How to reduce the time of connection of client computers Windows in authentication VLAN
Hi all
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"} I'm trying to shrink the log in time client machines take when they are in the authentication vlan. The connection time increases from 5 minutes to 7 minutes when the machines are managed by the NAC.
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}
We need for the NAC Agent perform an assessment AD SSO and posture before login scripts or other processes run. It is essential for us to delay the other process to run until after that NAC place client machines on the vlan access because these process would hang & fail while they are in the authentication vlan. One of the processes that hung & failed is the mapping of different network drives when the login scripts are executed.
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}
We ran a script to test and discovered that the NAC Agent will not run until it fits into the task bar of the window that requires process execution window iExplorer. However, the window iExplorer process also means the execution of many other processes that should not be executed (because they will hang & fail) until after NAC moves these client machines in the vlan access.
/ * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}
I need to know if it is possible to run the NAC Agent w/o it inserting itself in the system tray. If possible, how is it done?
Any help is appreciated.
Thank you
David,
Currently is not possible. NAC agent runs as a program and must operate under user credentials to be able to identify the user properly underway that would be of NAC. In later versions, there is a component of the agent service, but the SSO feature is always based on the Agent is loaded correctly. Your option is to run a script of late (detailed here: http://tinyurl.com/25d2aua ) and once this passes, then call your other scripts that do the mapping.
Also, if you experience excessive delays in the initial process of the SSO, ensure that you open all the ports that must be open, including the FRAGMENTS IP and ICMP for all your domain controllers in the unauthenticated role.
HTH,
Faisal
-
How to reduce the time in the query
Hi all
When I run this query, it will take more time to run it... Please suggest me... I added parallael tips... can we add advice to this request
select
explain plan
/*+ parallel(b, 10) parallel(a 10) parallel(f, 10) parallel(s 10) */
(((Category.Customer_Meter_Reading)/(Category.Customer_All_Meter_Reading))*100) as Count_of_customers, -- % of Customers
Count(g.Anlage) as Count_Of_Supplypoints, -- Count of Supply points
case
When a.cokey = '1000' then 'Premier Energy' -- Customer Segment
When a.cokey = '2000' then 'Energy First'
When a.cokey = '3000' then 'PAYGE'
end as Customer_Segment,
case
when nvl(df.SPARTE,'X') = 'X' then 'Dual Fuel'
else
case
when b.SPARTE ='01' then 'Electricity' --Product
when b.SPARTE ='02' then 'Gas'
end
end Product,
case
when b.fdgrp = '0000000001' then 'Direct Debit - QVDD' --PayMethod
when b.fdgrp = '0000000002' then 'Direct Debit - CPS'
when b.fdgrp = '0000000003' then 'Standing Order'
when b.fdgrp = '0000000004' then 'CPS - APT'
when b.fdgrp = '0000000005' then 'Magnetic Card'
when b.fdgrp = '0000000006' then 'CPS QEP'
when b.fdgrp = '0000000007' then 'Cash / Cheque'
when b.fdgrp = '0000000008' then 'Fuel Direct'
when b.fdgrp = '0000000009' then 'Prepayment'
when b.fdgrp = '0000000010' then 'Pending Fuel Direct'
else 'Other'
end as Paymethod,
case
when f.TARIFART='E-CAP4' then 'E-CAP4 - Price Protection April 2009'
when f.TARIFART='E-CAP5' then 'E-CAP5 - Price Promise'
when f.TARIFART='E-FIX2' then 'E-FIX2 - Price Protection 2010'
when f.TARIFART='E-FIX4' then 'E-FIX4 - Click Energy'
when f.TARIFART='E-FIX5' then 'E-FIX5 - Price Protection December 2009'
when f.TARIFART='E-FIX13' then 'E-FIX13 - Fix & Fall'
when f.TARIFART='E-FIX12' then 'E-FIX12 - Fix & Fall 2'
when f.TARIFART='E-FIX10' then 'E-FIX10 - Click Energy 2'
when f.TARIFART='E-FIX14' then 'E-FIX14 - Essentials (Social Tariff)'
when f.TARIFART='E-FIX6' then 'E-FIX6 - Discounted Energy'
when f.TARIFART='E-FIX16' then 'E-FIX16 - Click Energy 3'
when f.TARIFART='E-FIX20' then 'E-FIX20 - Market Tracker'
when f.TARIFART='E-FIX17' then 'E-FIX17 - Future Energy'
when f.TARIFART='E-FIX18' then 'E-FIX18 - Zero Carbon'
when f.TARIFART='E-FIX21' then 'E-FIX21 - Click Energy 4'
when f.TARIFART='E-FIX23' then 'E-FIX23 - Price Protection February 2009'
when f.TARIFART='E-FIX22' then 'E-FIX22 - Click Energy 5'
when f.TARIFART='E-FIX19' then 'E-FIX19 - 10% Discount Tracker'
when f.TARIFART='E-FIX11' then 'E-FIX11 - Price Guarantee 2009'
when f.TARIFART='E-FIX24' then 'E-FIX24 - Price Guarantee 2009 Green Elec'
when f.TARIFART='G-CAP1' then 'G-CAP1 - Price Protection April 2009'
when f.TARIFART='G-CAP2' then 'G-CAP2 - Price Promise'
when f.TARIFART='G-FIX2' then 'G-FIX2 - Price Protection 2010'
when f.TARIFART='G-FIX4' then 'G-FIX4 - Click Energy'
when f.TARIFART='G-FIX5' then 'G-FIX5 - Price Protection December 2009'
when f.TARIFART='G-FIX13' then 'G-FIX13 - Fix & Fall'
when f.TARIFART='G-FIX12' then 'G-FIX12 - Fix & Fall 2'
when f.TARIFART='G-FIX10' then 'G-FIX10 - Click Energy 2'
when f.TARIFART='G-FIX14' then 'G-FIX14 - Essentials (Social Tariff)'
when f.TARIFART='G-FIX6' then 'G-FIX6 - Discounted Energy'
when f.TARIFART='G-FIX16' then 'G-FIX16 - Click Energy 3'
when f.TARIFART='G-FIX20' then 'G-FIX20 - Market Tracker'
when f.TARIFART='G-FIX18' then 'G-FIX18 - Zero Carbon'
when f.TARIFART='G-FIX21' then 'G-FIX21 - Click Energy 4'
when f.TARIFART='G-FIX23' then 'G-FIX23 - Price Protection February 2009'
when f.TARIFART='G-FIX22' then 'G-FIX22 - Click Energy 5'
when f.TARIFART='G-FIX19' then 'G-FIX19 - 10% Discount Tracker'
when f.TARIFART='G-FIX11' then 'G-FIX11 - Price Guarantee 2009'
when f.TARIFART='E-FIX26' then 'E-FIX26 - Fixed Price 2011'
when f.TARIFART='G-FIX26' then 'G-FIX26 - Fixed Price 2011'
when f.TARIFART='E-FIX29' then 'E-FIX29 - ClickEnergy6'
when f.TARIFART='G-FIX29' then 'G-FIX29 - ClickEnergy6'
when f.TARIFART='E-FIX30' then 'E-FIX30 - DualFuel Extra (new Mason)'
when f.TARIFART='G-FIX30' then 'G-FIX30 - DualFuel Extra (new Mason)'
when f.TARIFART='E-FIX31' then 'E-FIX31 - 15% Discount Tracker'
when f.TARIFART='G-FIX31' then 'G-FIX31 - 15% Discount Tracker'
when f.TARIFART='E-FIX32' then 'E-FIX32 - Fixed Price 2012'
when f.TARIFART='G-FIX32' then 'G-FIX32 - Fixed Price 2012'
when f.TARIFART='E-FIX34' then 'E-FIX34 - Rollback'
when f.TARIFART='G-FIX34' then 'G-FIX34 - Rollback'
else 'Other'
end Tariff --Proposition
From
Ever a,
Erch b,
ztucs_so_items s,
ztucs_so_items df,
EABL h,
EABLG g,
Ettifn f,
(Select
SUM(CASE WHEN h.ABLESTYP IN ('01','02')
THEN 1
ELSE 0
END) Customer_Meter_Reading,
SUM(CASE WHEN h.ABLESTYP IN ('01','02','03','04')
THEN 1
ELSE 0
END) Customer_All_Meter_Reading,
g.anlage as Category_Anlage
From
EABL h,
EABLG g
Where
(h.ABLESTYP in('01','02','03','04')
OR h.ISTABLART in('01','02','06','A','AR','C','CL','CO',
'DR','FE','GA','GC','GD','GE','GF','GG','GH','GI','GJ','GN',
'GO','GP','GT','GU','GV','MO','MR','P','PP','SI','SM','T',
'TR','PR','Q','IV','Z'))
AND h.Mandt = g.Mandt
AND g.ABLBELNR = h.ABLBELNR
GROUP BY g.anlage ) Category
where
a.loevm = ' ' -- Current Contract
AND b.fdgrp <> ' '
AND a.Anlage <> ' '
AND f.Anlage <> ' '
AND s.item_type in ('02', '03') -- Move-in or Acquisition
AND a.auszdat = '99991231'
AND (f.bis is null OR (f.bis ='99991231' AND f.inaktiv = ' ')) -- facts
AND f.operand in('ERT-FIX','ERT-CAP','GRT-FIX','GRT-CAP')
AND g.ABLESGR = '06'
AND s.move_date > -- Opening Meter Read
( Case
when a.cokey in('1000','2000','3000')
then (SELECT TO_CHAR(SYSDATE - 400, 'yyyymmdd') FROM dual) -- 52 WEEKS and 35 days ago data
end
)
AND s.move_date <
(
Case
when a.cokey IN('1000','2000','3000')
then (SELECT TO_CHAR(SYSDATE , 'yyyymmdd') FROM dual) -- Current date
end
)
-- AND a.VKONTO = b.VKONT
AND a.MANDT = b.MANDT
AND a.VERTRAG = b.VERTRAG
AND b.VKONT (+) = s.VKONT
AND s.MANDT = b.MANDT
AND g.MANDT = h.MANDT
AND g.ABLBELNR = h.ABLBELNR
AND a.anlage=g.anlage
AND a.Anlage(+) = f.Anlage
AND df.ITEM_TYPE in ('02', '03') ----Dual Fuel Check
AND df.MANDT(+) = s.MANDT
AND df.SO_KEY(+) = s.SO_KEY
AND df.SO_ITEM_KEY(+) <> s.SO_ITEM_KEY
AND df.SPARTE(+) <> s.SPARTE
AND s.ANLAGE = Category.Category_Anlage
group by
/*+ parallel(b, 10) */
'hint6',
case
when nvl(df.SPARTE,'X') = 'X' then 'Dual Fuel'
else
case
when b.SPARTE ='01' then 'Electricity' --Product
when b.SPARTE ='02' then 'Gas'
end
end ,
f.TARIFART,
a.cokey,
b.fdgrp,
Category.Customer_Meter_Reading,
Category.Customer_All_Meter_ReadingPLAN_TABLE_OUTPUT
Note: On each of the tables we have a field called mandt, who is the field of indexes for all tables listed below.
Plan hash value: 2310571763
------------------------------------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | TQ |IN-OUT| PQ Distrib |
------------------------------------------------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 2574 | 771K| | 12M (14)| 40:16:00 | | | |
| 1 | PX COORDINATOR | | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10010 | 2574 | 771K| | 12M (14)| 40:16:00 | Q1,10 | P->S | QC (RAND) |
| 3 | HASH GROUP BY | | 2574 | 771K| | 12M (14)| 40:16:00 | Q1,10 | PCWP | |
| 4 | PX RECEIVE | | 2574 | 771K| | 12M (14)| 40:16:00 | Q1,10 | PCWP | |
| 5 | PX SEND HASH | :TQ10009 | 2574 | 771K| | 12M (14)| 40:16:00 | Q1,09 | P->P | HASH |
| 6 | HASH GROUP BY | | 2574 | 771K| | 12M (14)| 40:16:00 | Q1,09 | PCWP | |
|* 7 | HASH JOIN | | 3696M| 1056G| | 11M (12)| 39:02:50 | Q1,09 | PCWP | |
| 8 | PX RECEIVE | | 59774 | 15M| | 1390K (10)| 04:38:06 | Q1,09 | PCWP | |
| 9 | PX SEND HASH | :TQ10008 | 59774 | 15M| | 1390K (10)| 04:38:06 | Q1,08 | P->P | HASH |
| 10 | BUFFER SORT | | 2574 | 771K| | 12M (14)| 40:16:00 | Q1,08 | PCWP | |
| 11 | NESTED LOOPS | | 59774 | 15M| | 1390K (10)| 04:38:06 | Q1,08 | PCWP | |
|* 12 | FILTER | | | | | | | Q1,08 | PCWC | |
| 13 | NESTED LOOPS OUTER | | 59774 | 13M| | 1370K (10)| 04:34:06 | Q1,08 | PCWP | |
|* 14 | HASH JOIN | | 59774 | 12M| 87M| 1343K (10)| 04:28:45 | Q1,08 | PCWP | |
| 15 | PX RECEIVE | | 13M| 723M| | 27311 (6)| 00:05:28 | Q1,08 | PCWP | |
| 16 | PX SEND HASH | :TQ10006 | 13M| 723M| | 27311 (6)| 00:05:28 | Q1,06 | P->P | HASH |
| 17 | PX BLOCK ITERATOR | | 13M| 723M| | 27311 (6)| 00:05:28 | Q1,06 | PCWC | |
|* 18 | TABLE ACCESS FULL | ZTUCS_SO_ITEMS | 13M| 723M| | 27311 (6)| 00:05:28 | Q1,06 | PCWP | |
| 19 | PX RECEIVE | | 33M| 5104M| | 1284K (11)| 04:16:49 | Q1,08 | PCWP | |
| 20 | PX SEND HASH | :TQ10007 | 33M| 5104M| | 1284K (11)| 04:16:49 | Q1,07 | P->P | HASH |
|* 21 | HASH JOIN BUFFERED | | 33M| 5104M| 59M| 1284K (11)| 04:16:49 | Q1,07 | PCWP | |
| 22 | PX RECEIVE | | 4882K| 540M| | 950K (11)| 03:10:02 | Q1,07 | PCWP | |
| 23 | PX SEND HASH | :TQ10004 | 4882K| 540M| | 950K (11)| 03:10:02 | Q1,04 | P->P | HASH |
|* 24 | HASH JOIN | | 4882K| 540M| | 950K (11)| 03:10:02 | Q1,04 | PCWP | |
|* 25 | HASH JOIN | | 1554K| 114M| | 225K (10)| 00:45:09 | Q1,04 | PCWP | |
| 26 | PX RECEIVE | | 1424K| 47M| | 185K (10)| 00:37:10 | Q1,04 | PCWP | |
| 27 | PX SEND HASH | :TQ10002 | 1424K| 47M| | 185K (10)| 00:37:10 | Q1,02 | P->P | HASH |
| 28 | PX BLOCK ITERATOR | | 1424K| 47M| | 185K (10)| 00:37:10 | Q1,02 | PCWC | |
|* 29 | TABLE ACCESS FULL | ETTIFN | 1424K| 47M| | 185K (10)| 00:37:10 | Q1,02 | PCWP | |
| 30 | PX RECEIVE | | 15M| 613M| | 39811 (10)| 00:07:58 | Q1,04 | PCWP | |
| 31 | PX SEND HASH | :TQ10003 | 15M| 613M| | 39811 (10)| 00:07:58 | Q1,03 | P->P | HASH |
| 32 | PX BLOCK ITERATOR | | 15M| 613M| | 39811 (10)| 00:07:58 | Q1,03 | PCWC | |
|* 33 | TABLE ACCESS FULL | EVER | 15M| 613M| | 39811 (10)| 00:07:58 | Q1,03 | PCWP | |
| 34 | BUFFER SORT | | | | | | | Q1,04 | PCWC | |
| 35 | PX RECEIVE | | 45M| 1678M| | 724K (11)| 02:24:50 | Q1,04 | PCWP | |
| 36 | PX SEND HASH | :TQ10000 | 45M| 1678M| | 724K (11)| 02:24:50 | | S->P | HASH |
|* 37 | INDEX FAST FULL SCAN| PK_EABLG | 45M| 1678M| | 724K (11)| 02:24:50 | | | |
| 38 | PX RECEIVE | | 188M| 7554M| | 279K (11)| 00:55:58 | Q1,07 | PCWP | |
| 39 | PX SEND HASH | :TQ10005 | 188M| 7554M| | 279K (11)| 00:55:58 | Q1,05 | P->P | HASH |
| 40 | PX BLOCK ITERATOR | | 188M| 7554M| | 279K (11)| 00:55:58 | Q1,05 | PCWC | |
|* 41 | TABLE ACCESS FULL | ERCH | 188M| 7554M| | 279K (11)| 00:55:58 | Q1,05 | PCWP | |
| 42 | FAST DUAL | | 1 | | | 2 (0)| 00:00:01 | | | |
| 43 | FAST DUAL | | 1 | | | 2 (0)| 00:00:01 | | | |
|* 44 | TABLE ACCESS BY INDEX ROWID | ZTUCS_SO_ITEMS | 1 | 30 | | 4 (0)| 00:00:01 | Q1,08 | PCWP | |
|* 45 | INDEX RANGE SCAN | PK_ZTUCS_SO_ITEMS | 1 | | | 3 (0)| 00:00:01 | Q1,08 | PCWP | |
|* 46 | INDEX RANGE SCAN | PK_EABL | 1 | 25 | | 3 (0)| 00:00:01 | Q1,08 | PCWP | |
| 47 | BUFFER SORT | | | | | | | Q1,09 | PCWC | |
| 48 | PX RECEIVE | | 15M| 529M| | 10M (12)| 34:19:02 | Q1,09 | PCWP | |
| 49 | PX SEND HASH | :TQ10001 | 15M| 529M| | 10M (12)| 34:19:02 | | S->P | HASH |
| 50 | VIEW | | 15M| 529M| | 10M (12)| 34:19:02 | | | |
| 51 | HASH GROUP BY | | 15M| 958M| 37G| 10M (12)| 34:19:02 | | | |
|* 52 | HASH JOIN | | 487M| 30G| 16G| 6939K (10)| 23:07:59 | | | |
|* 53 | TABLE ACCESS FULL | EABL | 414M| 11G| | 4157K (12)| 13:51:29 | | | |
| 54 | INDEX FAST FULL SCAN | PK_EABLG | 488M| 16G| | 707K (9)| 02:21:26 | | | |
------------------------------------------------------------------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
7 - access("S"."ANLAGE"="CATEGORY"."CATEGORY_ANLAGE")
12 - filter("DF"."ITEM_TYPE"='02' OR "DF"."ITEM_TYPE"='03')
14 - access("B"."VKONT"="S"."VKONT" AND "S"."MANDT"="B"."MANDT")
filter("S"."MOVE_DATE">CASE "A"."COKEY" WHEN '1000' THEN (SELECT TO_CHAR(SYSDATE@!-400,'yyyymmdd') FROM "SYS"."DUAL" "DUAL") WHEN
'2000' THEN (SELECT TO_CHAR(SYSDATE@!-400,'yyyymmdd') FROM "SYS"."DUAL" "DUAL") WHEN '3000' THEN (SELECT TO_CHAR(SYSDATE@!-400,'yyyymmdd')
FROM "SYS"."DUAL" "DUAL") END AND "S"."MOVE_DATE"<CASE "A"."COKEY" WHEN '1000' THEN (SELECT TO_CHAR(SYSDATE@!,'yyyymmdd') FROM "SYS"."DUAL"
"DUAL") WHEN '2000' THEN (SELECT TO_CHAR(SYSDATE@!,'yyyymmdd') FROM "SYS"."DUAL" "DUAL") WHEN '3000' THEN (SELECT
TO_CHAR(SYSDATE@!,'yyyymmdd') FROM "SYS"."DUAL" "DUAL") END )
18 - filter("S"."ITEM_TYPE"='02' OR "S"."ITEM_TYPE"='03')
21 - access("A"."MANDT"="B"."MANDT" AND "A"."VERTRAG"="B"."VERTRAG")
24 - access("A"."ANLAGE"="G"."ANLAGE")
25 - access("A"."ANLAGE"="F"."ANLAGE")
29 - filter("F"."BIS"='99991231' AND ("F"."OPERAND"='ERT-CAP' OR "F"."OPERAND"='ERT-FIX' OR "F"."OPERAND"='GRT-CAP' OR
"F"."OPERAND"='GRT-FIX') AND "F"."INAKTIV"=' ' AND "F"."ANLAGE"<>' ')
33 - filter("A"."AUSZDAT"='99991231' AND "A"."LOEVM"=' ' AND "A"."ANLAGE"<>' ')
37 - filter("G"."ABLESGR"='06' AND "G"."ANLAGE"<>' ')
41 - filter("B"."FDGRP"<>' ')
44 - filter("DF"."SPARTE"(+)<>"S"."SPARTE")
45 - access("DF"."MANDT"(+)="S"."MANDT" AND "DF"."SO_KEY"(+)="S"."SO_KEY")
filter("DF"."SO_ITEM_KEY"(+)<>"S"."SO_ITEM_KEY")
46 - access("G"."MANDT"="H"."MANDT" AND "G"."ABLBELNR"="H"."ABLBELNR")
52 - access("H"."MANDT"="G"."MANDT" AND "G"."ABLBELNR"="H"."ABLBELNR")
53 - filter("H"."ABLESTYP"='01' OR "H"."ABLESTYP"='02' OR "H"."ABLESTYP"='03' OR "H"."ABLESTYP"='04' OR "H"."ISTABLART"='01' OR
"H"."ISTABLART"='02' OR "H"."ISTABLART"='06' OR "H"."ISTABLART"='A' OR "H"."ISTABLART"='AR' OR "H"."ISTABLART"='C' OR "H"."ISTABLART"='CL' OR
"H"."ISTABLART"='CO' OR "H"."ISTABLART"='DR' OR "H"."ISTABLART"='FE' OR "H"."ISTABLART"='GA' OR "H"."ISTABLART"='GC' OR "H"."ISTABLART"='GD'
OR "H"."ISTABLART"='GE' OR "H"."ISTABLART"='GF' OR "H"."ISTABLART"='GG' OR "H"."ISTABLART"='GH' OR "H"."ISTABLART"='GI' OR
"H"."ISTABLART"='GJ' OR "H"."ISTABLART"='GN' OR "H"."ISTABLART"='GO' OR "H"."ISTABLART"='GP' OR "H"."ISTABLART"='GT' OR "H"."ISTABLART"='GU'
OR "H"."ISTABLART"='GV' OR "H"."ISTABLART"='IV' OR "H"."ISTABLART"='MO' OR "H"."ISTABLART"='MR' OR "H"."ISTABLART"='P' OR
"H"."ISTABLART"='PP' OR "H"."ISTABLART"='PR' OR "H"."ISTABLART"='Q' OR "H"."ISTABLART"='SI' OR "H"."ISTABLART"='SM' OR "H"."ISTABLART"='T' OR
"H"."ISTABLART"='TR' OR "H"."ISTABLART"='Z')
We do not have privileges to create indexes in our database.
Please do what is necessary...
Thanks in advancesamuraibala wrote:
Hi allWhen I run this query, it will take more time to run it... Please suggest me... I added parallael tips... can we add advice to this request
The biggest contributor under the plan displayed is the following view inline, that is running a series on the large table EABL sweep. You might consider adding a hint of parallel, for example like this:
(Select / * + parallel (h) * /)
SUM (CASE WHEN h.ABLESTYP IN ('01 ', ' 02')
THEN 1
0 OTHERWISE
END Customer_Meter_Reading),
SUM (CASE WHEN h.ABLESTYP IN ('01', '02', ' 03', ' 04')
THEN 1
0 OTHERWISE
END Customer_All_Meter_Reading),
g.Anlage as Category_Anlage
Of
EABL h,
EABLG g
Where
(h.ABLESTYP in ('01 ',' 02','03 ', ' 04')
OR h.ISTABLART ('01', ' 02 ', ' 06', 'A', 'AR', ' it 'CL', 'CO',)
'DR', 'FE', 'GA', 'GC', 'GD', "GE", "GF", "GG", "GH", "GI", "GJ", "GN"
'GO', 'PG', 'GT', 'GU', 'GV', 'MO', 'SIR', 'P', 'PP', 'IF', 'DM', 'T'.
'TR', 'PR', 'Q', 'IV', 'Z'))
AND h.Mandt = g.Mandt
AND g.ABLBELNR = h.ABLBELNR
GROUP BY g.anlage) categoryI don't know if the following two expressions are sensitive:
First of all, you need not to use a scalar subquery to evaluate this constant expression, a simple TO_CHAR (SYSDATE - 400, 'YYYYMMDD') should be sufficient
Secondly, why do you not use TO_CHAR? Is MOVE_DATE a TANK or a DATE column? If it's a DATE column (as its name suggests) then simply use trunc (SYSDATE - 400) instead of TO_CHAR (...)
Thirdly, what happens if HOKEY is not in ('1000', '2000' 3000')? Then these expressions return the NULL value which will efficiently filter on these files. What is your intention?AND s.move_date >-read meter opening
(Case
where a.cokey in ('1000 ',' 2000 ', ' 3000')
then (SELECT TO_CHAR(SYSDATE-400, 'yyyymmdd') FROM dual) - 52 WEEKS and 35 weeks ago given
end
)
AND s.move_date
(
Case
where a.cokey IN ('1000 ', '2000','3000 ')
then (SELECT TO_CHAR (SYSDATE, 'yyyymmdd') FROM dual) - current date
end
)I don't think that it is a valid position for a tip, so I don't know what plan you make with it?
Group
/ * + parallel (10B) * /.Kind regards
RandolfOracle related blog stuff:
http://Oracle-Randolf.blogspot.com/SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676 /.
http://sourceforge.NET/projects/SQLT-pp/ -
I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?
Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...
-
How to reduce the amount of storage to free up more space
How to reduce the amount of storage to free up more space
There are several things you could do.
Save your iPad to iTunes on a computer or create an iCloud account, find out how much storage space you need for data and if you need to buy storage space monthly, to do. Then save your iPad to iCloud.
HOWEVER the data backup on your iPad using WiFi or Bluetooth wireless, local devices such as portable hard drives or small flash memory drives designed for use with mobile devices, like the iPad.
Remove the applications that you use is no longer. If you start to use them in the future, you can re-download them the iOS App Store.
Thin out / remove the amount of music and movies you have on your iPad.
If you make a backup of your iPad, you can thin out / delete all images stored in the iOS App Photos.
Thin out / remove all books electronic, iBooks, eMagazines, and PDF documents, you have stored on your iPad. Magazines and e-books can be redownloaded at a later date.
-
How to decrease the time to start on Satellite A300/U01?
I have a laptop Toshiba Satellite A300/U01. With the following characteristics:
Intel Core 2 Duo T 9400 @ 2.53 GHz
4.00 GB RAM
ATI Mobility Radeon HD 3650 graphics card
Windows Vista Edition Home PremiumI was wondering if anyone can tell me how to reduce the startup time of my laptop including how to optimize windows vista. It currently takes about 2.5 to 3-minute boot times.
I used msconfig to limit the number of programs at the start of the anti-virus, as well as a few others and Tempro software up-to-date.
Please help, because I constantly need to close starting up my computer on a daily basis.
Kind regardsJack
Hello
Very interesting discussion on the time of boot sequence you can find
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=134947Check it out!
-
Door key lost in the time machine backup
Dear community,
Because I had trouble with the speed of my MacBook Pro (and nothing else developed), I had to set up entirely new.
Before installing El Capitan, my MacBook Pro (starting 2011) ran on Yosemite 10.10.5. I made two backups with time machine, generated a bootable El Capitan installation USB key, in format Macintosh HD, installed at El Capitan and ran all the updates. The system works well, everything works perfectly and my Mac is fast again. Now, I manually copy things that I need in my system of charges.
Here, the problem is: I can't find the old keychain file in the time machine backup!
Keychain works with the keys stored in iCloud. However, the other buttons are gone.
As I discovered, ~/Library/Keychains is hidden. I did it visible on my system running. However, this does not work in the backup file. It remains hidden or - worse - have not been stored in the backup. I don't know that I have excluded from time machine backup only two totally different folders (dropbox and movies).
You have any ideas how I can find my keychain (login.keychain if my search was right) in the time machine backup?
Thanks a lot for your help!
Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.
If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.
The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.
The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.
Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.
The next part is 'Users', followed by a slash.
Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.
Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.
-
accordion jQuery how to reduce the default Panel
Hi I'm using the latest Dreamweaver how to reduce the Panel so that none are open when the page opens.
mayramoca33 wrote:
foldingType: Boolean
By default:
falseIf all the sections can be closed at the same time. To collapse the current section.
Code examples:
Initialize a Accordion with the
collapsibleoption specified:1$( ".selector" ).accordion({ collapsible: true });Get or set the
collapsibleoption, after init:12
3
4
5
// gettervar collapsible = $( ".selector" ).accordion( "option", "collapsible" );// setter$( ".selector" ).accordion( "option", "collapsible", true );Hi Nancy I see this
and I click on reducible in property panel and it gives me this:
But I can't understand how to reduce the first Panel
Try the following:
-
I use openscript on oracle ebs/forms, but when I playback, it costs me a lot of time and I can hardly stand. I already reduced the time for reflection after each command. Can anyone give me a suggestion on how to reduce the playing time?
Use the option of reading "without delay."
'See '->' preferences OpenScript'-> 'Reading'-> "SEEN Pacing (Think Time)"
-
How to reduce the size of the records Quicktime file?
On my Mac, they take as much space as 1 GB for a film record or a screen for 2 minutes.
iPad records take up much less space and are of a higher quality.
Anyone know how to reduce the size of the file, or at least tell me why they use so much space? I have only 128 GB.
A big thank you to you all, good people.
I don't see that you can export out of other than QT. MOV
but you can use an external converter
While it is mainly used to convert video files to DVD it will also convert video files.
-
I have a new HD but cannot set up encryption with system preferences. After ten minutes, I get the following error message:
"There was an error preparing the Time Machine backup disk (disc name) - could not mount drive"
Apparently, I need to set up the HD in this way:
- If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT)
It is not an option for the HFS + and so I used; OS x EXTENDED (journaled). GUID is ok.
Can someone let me know what I need to do.
Thank you
Formatting: GUID Partition Table, OS X Extended (journaled). (it is HFS +)
For TimeMachine at best to a partition only.
Do it again if necessary, then disconnect, reconnect, Start Time Machine preferences and "select disk".
-
What exactly does the Time Machine backup?
What exactly does the Time Machine backup?
We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally. Time Machine backup all internal disks or just the boot disk? This can be configured?
Time Machine backs up your default boot partition. However, if you have more than one drive or partition on your Mac (and it is formatted in "Mac OS extended (journaled)"), you can set the Time Machine to save these drives too. You can do this by removing these drives from the list of excluded items in System-> Time Machine-> Options... Preferences, so that the next backup will include all internal hard drives or partitions that you want to back up too.
Maybe you are looking for
-
Amazon Seller app won't delete my iPhone6.
Amazon Seller app won't delete my iPhone6. It is no longer visible in my iTunes Store account. How to kill this app for good?
-
I made a mistake some how. I'm not the best a computer news as the new avg with the research changes. I want to return my old menu bar. I want to be able to open a new tab without going through an open search window. I don't like new tiny 'file above
-
Web pages display with oversized fonts and text is overlapping why
That's what I GetIf I could insert a picture here to show you what my screen looks like. It would be better. If I coppy what I get in Firefox here, it appears correctly. I use Chrome G write you. Text is superimposed the font, the size of one third o
-
Formula percentage symbol question
I am creating a simple spreadsheet to calculate the differences in percentage between a set of numbers based on stock market returns. When I try to create the formula (B3 - B2) / B2, numbers puts the sign '+' instead of the sign ' / '. Any help to ge
-
Is there a function to have a chart at the same time the full signal and a zoom in display signal?
See the attached Jpeg format. Ive created this using 2 separate charts. Ideally I'd like make using one graph. Is this possible?