How to refresh a materialized with DBMS_SCHEDULER view. CREATE_JOB();

Similar Questions

• Problem with DBMS_SCHEDULER. CREATE_JOB in the package

  Hi all
  
  I tried the following with DBMS_SCHEDULER example. CREATE_JOB.
  This is just an example, I tried to use the DBMS_SCHEDULER package. Exception block is also not have good standards, because I just want to understand that the package

  create table test_test1 (process_id number  ,name varchar2(22) )
  
  CREATE OR REPLACE PACKAGE PKG_SCHEDULER_TEST
  IS
     PROCEDURE proc_test (v_process_id NUMBER, v_name VARCHAR2);
  
     PROCEDURE DATA_LOAD (v_process_id NUMBER, v_name VARCHAR2);
  END PKG_SCHEDULER_TEST;
  
  
  
  CREATE OR REPLACE PACKAGE BODY PKG_SCHEDULER_TEST
  IS
     PROCEDURE Data_load (v_process_id NUMBER, v_name VARCHAR2)
     IS
     BEGIN
        DBMS_OUTPUT.PUT_LINE ('Data_Load Started ');
  
        INSERT INTO test_test1 (process_id, name)
             VALUES (v_process_id, v_name);
  
        COMMIT;
     EXCEPTION
        WHEN OTHERS
        THEN
           DBMS_OUTPUT.put_line ('sp_Data_load error');
     END;
  
  
     PROCEDURE proc_test (v_process_id NUMBER, v_name VARCHAR2)
     IS
     BEGIN
        DBMS_OUTPUT.PUT_LINE ('PROC_TEST STARTED ');
  
        FOR i IN 1 .. 10
        LOOP
           DBMS_OUTPUT.PUT_LINE ('Inside loop started');
           DBMS_SCHEDULER.CREATE_JOB (
              JOB_NAME          => 'Scheduler' || i,
              JOB_TYPE          => 'PLSQL_BLOCK',
              JOB_ACTION        => 'begin
                                             PKG_SCHEDULER_TEST.DATA_LOAD ('
                                            || v_process_id
                                            || ','
                                            || ''''
                                            || v_name
                                            || '); end;',
              START_DATE        => NULL,
              REPEAT_INTERVAL   => NULL,
              END_DATE          => NULL,
              ENABLED           => TRUE,
              COMMENTS          => ' Comments');
        END LOOP;
  
        DBMS_OUTPUT.PUT_LINE (' Lood ended');
     EXCEPTION
        WHEN OTHERS
        THEN
           DBMS_OUTPUT.put_line (
              'proc_test error' || SQLCODE || ',' || SQLERRM);
     END;
  END PKG_SCHEDULER_TEST;

  The above package was created successfully, but when I tried to run this package the following is the output

  SQL> set serverout on
  SQL> exec PKG_SCHEDULER_TEST.proc_test(1,'A
  PROC_TEST STARTED
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Inside loop started
  Lood ended
  
  PL/SQL procedure successfully completed.

  The question now is after the execution of this package, that the data is not loaded in the TEST_TEST1 table and no statement of output which is located in the Data_load procedure
  
  Please guide me where I am doing wrong
  
  Thank you

  Take a close look at your JOB_ACTION

              JOB_ACTION        => 'begin
                                             PKG_SCHEDULER_TEST.DATA_LOAD ('
                                            || v_process_id
                                            || ','
                                            || ''''
                                            || v_name
                                            || '); end;',
  

  It will come out with something like

  begin
  PKG_SCHEDULER_TEST.DATA_LOAD(1,'name); end;
  

  See the problem?

• How to edit a map with a view that the target object?

  Environment: OWB 11 GR 2
  
  I imported several cards of our old OWB 10.1.0.4 environment that have a view as the target object. In this version if I wanted to make a change to the definition of the view, I want to update the map and an outgoing "balance" to the view and it would update the View object with the SQL update. I would then deploy the view and obviously not the card.
  
  I tried to do the same function in OWB 11 GR 2, but I have not yet found the thing. IMHO the documentation is very vague, weak, in this area, at least the many pages I've read.
  
  I opened the card for editing and when I select the view target object and look at the Properties window, the link to the SQL code is empty, even if this isn't the SQL code of the View object.
  
  I tried to use it out 'synchronize' in several different ways, but could not do any SQL appear in this properties link. I also noticed that the SQL code of the View object is now empty as well.
  
  What Miss me?
  
  Thank you very much!!
  
  -gary

  Hi Gary

  You use the 'create and link... ". "on the operator to see in the map (right mouse click on the operator for the menu option) and select a name and a module.

  See the blog post here that describes it well than its gr 10, 2 and 11 GR 1 material, but its exactly the same thing for 11 GR 2.
  http://blogs.Oracle.com/warehousebuilder/2007/07/what_is_new_in_11g_and_10203_f.html

  Create and link is like synchronize the first outgoing - if you can consider it, weird I know, but that's how.
  See you soon
  David

• How to refresh a screen with fields update

  I am writing my first BB App trouble and having to refresh the objects on screen (among others).

  I have an application with a main screen that calls an options screen.  The Options screen allows the user to change the system of units, using a persistent store.

  Return to the main screen of calc, the calc main screen have updated the text to reflect the change of units.  I see other messages that I can use invalidate(), but I don't understand where to put invalidate() in code.

  During the initial load, the main screen must get the persistent metric indicator before set labels with SetUnitLabels() areas.

  The options in the menu pushes the options screen.

  Burst the options screen and pushing the calcscreen returns to the main screen and must call the SetUnitLabels() method to update the text in the field.

  It's the constructor in the CalcScreen, the main screen

  public CalcScreen() {}

  Super();

  boolIsMetric = myOptions.getBoolMetricFlag ();  retrieve the metric indicator to set the text on the screen
     
  addScreenItems(); Adding visual elements to the screen

  calcScreen = this.getScreen ();  I get the name of this screen for later use

  }

  This method pushes the options screen options:

  {} public void options()
  ClearScreen();
  UiApplication.getUiApplication () .popScreen (calcScreen);
  UiApplication.getUiApplication () .pushScreen (new OptionScreen (calcScreen));
  }

  This method goback in the screen options returns to the main calcscreen:

  public void goback() {}
  UiApplication.getUiApplication () .popScreen (this);
  UiApplication.getUiApplication () .pushScreen (toScreen);
  };

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  I tried to use the following executable invalidate(), but I don't know where to put it so that it is called.

  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run()
  {
  SetUnitLabels();           Make changes to screen here.

  calcscreen. Invalidate();
  }
  });

  >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  I'm sure that the answer is something simple, but I just don't get it.

  Thanks for your help.

  The appearance of your code, when you exit the Options screen, you push a replacement, so the code that I have proposed may not work - she expects a different screen management technique.  .

  In general, I have a splash screen of the application, which is still there and then I push the next screen when the user has finished with this screen, I pop, which appears again the screen below.  You can have several layers of screens like that.

  Now when I go into my Options screen, processing code goes to just a pushModal, as you did, then the following modal push code will be executed when the screen Options ' pop so at this time, I can update all the values on the current screen.

  It is roughly what you suggested, but you have not need jump the calcScreen because you want she displayed when the Options screen is out, so he might as well stay on the display stack.

  Does make sense?

• View materialized with fast refresh and CLOB

  People,

  I have a table named ABC in a database named D1. This table has a CLOB column named CLOBCOL.

  I'm trying to replicate ABC table in the database of D2 using dblink.

  So, I tried to create Materialized View ABCMV of database D2 using the dblink. But cannot create because of the CLOB data type.

  Yes, thought of creating discovered first in database D1 and then create Materialized View in the database D2.

  But, the problem is that if I do, then the materialized view cannot be "refresh quickly" because he has materialized view log. Now, as this materialized view is supposed to rest on the view to D1, where and how can I create materialized view log.

  Help, please.

  Hello

  How about this trick - don't know if you can change your table in the source?

  TEST@DEMODB > alter table test add col4 as (DBMS_LOB. SUBSTR (col3, 500, 1)) virtual;

  Modified table.

  Test2@DEMODB > create a materialized view rich quickly updated with rowid as select col1, col2, col4 test@demo;

  Materialized view created.

  TEST2@EETGRID >

  See you soon,.

  Rich

• How to refresh materialized views

  I'm following the steps to migrate a 12.0.6 financials database to OATM (model Tablespace Oracle Applications). One of the steps say to "perform a refresh all materialized views complete." This step is not part of the Oracle OATM utility. I wasn't able to find much on Metalink on this one. How to achieve this? Thank you... Colin

  Colin,

  See Note: 391483.1 - how to refresh materialized views after migration to the model OATM
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=391483.1

• Refresh the Materialized View constructed from an external table commit?

  Is it possible to create a materialized with Refresh view on commit built from an external table?
  
  I think the answer is "no, because there is no way for the outer table report to the view materialized it has been changed," but I would like to be sure before I tell my client who has requested the opportunity to do this (or, Alternatively, to learn how Oracle hoops I have to cross in order to operate).
  
  I can create a Refresh on demand, it is not a question of not having the necessary permissions to create the materialized view itself.

  No, you can't. The outer table is not modified in a transactional way and there no materialized view logs, so there is no event to hang in and no delta to apply.

  However, you can use dbms_scheduler observer file that will ask for the presence of a file and load the data in a table or refresh a materialized view based on the external table.

  Justin

• Materialized with dynamic input possible view?

  Hello

  We have some end users have a very complex query of SQL reports (~ 2500 lines) they came with.  We are trying to tune and to create additional indexes as needed.  He has made more than one aggregation of xml and the chain in select statements.  in any case while I'm looking for other methods deal with the problem regardless of a potentially inefficient SQL query.

  In my opinion, they said that the query taking ~ 6000 sec to finish and basically http sessions expire of their web application after 4000 seconds of inactivity.  They have a few dynamic user input from the web page which is fed in the request for multiple WHERE clauses.  So I think we want to have this query that is run in offline mode (after the user input is collected) as well as the results stored in a table, then the wep app can do a simple select query to retrieve data from the table of results later.

  Is there a way to create a materialized view and replace user with some variables bind input and update the values of the variables bind with the participation of the user whenever they want the data, and then refresh the materialized view?  Or if there is a better mechanism for Oracle to run asynchronously this query offline with dynamic input and then store the results in a table?  My problem is that I don't know if they can call a sp and feed the bind values as parameters, but maybe I need to force them to.  I really don't want to process SQL statements dynamic that their request is so great andt hey asked me on GTT, but I was under the impression that the data is lost after each session and probably wouldn't really solve anything.  Thoughts?

  
  

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  Web pages should return something in<5s or="" the="" end-user="" will="" hit="" the="" refresh="" button="" again="" and="" again="" and="" again="" and="">

  Do something like this:

  • store the query to run the sql in a table with the values for the variables bind (parent table)
  • run the SQL in the background via DBMS_SCHEDULER
  • store the results in a partitioned table. (child table) (I assume a large amount of data)
    • for example, use a partition of range interval by sequence ID 1. of the parent
  • update the parent with the status table "Hey, I'm made.
  • Maybe the applicant send an email.
  • Web page queries only the parent table.
  • a scheduled task removes the no-more-required data through DROP PARTITION.

  MK

• create a materialized with sizes of specific columns view

  Hi all
  
  I am creating a materialized with a specific column size view. Something like
  

  create materialized view test_mv
  refresh force on demand
  as
  select id, 
         cast(my_compound_field as nvarchar2(50))
  from ( select id, 
                field1 || field2 my_compound_field
         from   my_table);

  But Oracle seems to ignore the cast and takes the maximum size it finds for field1 | Field2 in the select query. The resulting table has a nvarchar2 (44) instead of nvarchar2 column (50).
  
  Which can be a problem when the display is updated... There could be new data that exceeds the current size, which is where length(field1 || field2) > 44.
  
  How can I change the size of the column to a field in a materialized view?
  
  Edit: Some extra info to clarify my case:
  Field1 and Field2 are defined as nvarchar2 (25). Field1 | Field2 can theoretically have a length of 50, but currently there is no data in my table that results from this length, the max is 44. I fear that in the future there is data that is greater than 44, which results in an error when the MV is refreshed!
  
  Published by: Pleiadian on January 25, 2011 14:06

  Try the substr function.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions181.htm#i87066

• When I view my Photos, they have a place and a date. How can I print them with that on them?

  When I view my Photos, they have a place and a date. How can I print them with that on them?

  You want to print the information on the image itself?  To do this, you will need to export the picture on the desk and edit it with a 3rd party image editor that supports the text and layers:

  Some Image editors that support layers and text:

  
  

  Photoshop Elements for Mac 11 - $79

  GraphicConverter - $40
  The Rainbow painter - $30

  Photos of affinity- $50

  FX Photo Studio - $30

  Inpaint - $20
  Imaging - $38
  Acorn - $50

  Pixelmator - $60

  Seashore - free

  GIMP for Mac - free (Yosemite & Mavericks only)

  

• How to focus with live view on 70 d

  Hello

  My girlfriend recently bought the 70 d and while that it "is a neat device, we would hit a problem: how to place your focus using live view in M mode?
  I want only to place the point and to focus with half the press as usual. Instead, when I place the focus by pressing the touch screen, it should be immediately shot.

  And why there is no possibility to move the update using the wheel apperture as on my 6 d?

  Thank you much in advance.

  N.B: Please excuse my English

  When in live view, you can use the rear dial to move the focus "place".

  As for the second request, when in mode live view press the info button to bring up the options. Take a look in the lower left corner, there is an icon that allows you to enable or disable the option to instantly take the photo. It will show it OFF or

• Materialized with a dynamic column view.

  Hello
  
  Is it possible to use the materialized in function view.
  A column in the view is dynamic, which means that we are entering a parameter in the view.
  
  Thank you

  A way to "set view" in Oracle is to use "sys_context '.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions184.htm#SQLRF06117

  You set the context and then you set your display that uses the sys_context parameter.

  Edit:

  Another link.

  http://download.Oracle.com/docs/CD/E11882_01/network.112/e16543/app_context.htm#DBSEG178

  Published by: RPuttagunta on August 22, 2011 07:28

• How can I download videos with RealPlayer?

  When I've upgraded to FireFox 13 my Plugin RealPlayer browser Record has been disabled as dangerous and unstable. Now I can't download videos that I watch with RealPlayer. When I activate the Plugin, I can't watch the video (I get a blank video screen). So, how can I download and save videos I want like those on the pulse of the planet by Rick Levine or other sites with recordable video? I downloaded and installed the latest version of RealPlayer and they say that I will be able to download videos but I can't. This problem is also related to this Plugin disabled?

  Hi all Freaked Out Firefox and RealPlayer users,

        This is the proper workaround for the problem of not being  able to see videos after the Adobe defective 11.3 update (either the 11.3.300.257 or the latest 11.3.300.262) and  not being able to download them with the RealPlayer Browser  Record Plugin extension because Firefox disabled it.You can  enable it but you won't be able to see videos unless you roll  back the defective update and disabling the extension doesn't even work  for some users to even let you see videos, much less download them. I successfully tested   uninstalling adobe's update 11.3  and reinstalling with two  different versions  - 10.3 and 11.2 and posted this on other  threads beginning 6/11. People who have tried it have been  very grateful once they stopped listening to all the  confusing and misleading recommendations by Firefox and  Adobe. It's the ONLY one that gives full use of RealPlayer as  well as updated security on the Flash Player and I've  provided  the most direct link to that version without having  to download a cumbersome .zip file. It's a link to the 10.3  version. You will see other references to the 11.2 version on  this thread. Although I tested that first and it works  equally well, there are known critical vulnerabilities as  reported by Secunia and Adobe,so I don't recommend it unless  you have top security software. I do, and had no trouble with  it. The 10.3, however, is up to date on security and works  equally well -I've tested both. Just remember to enable the  RealPlayer Browser Record Plugin extension after you roll  back the update.
  

        Alternatively, if you want, you can simply switch browsers  'till this is fixed. And for many of you for whom  FF  disabling the RealPlayer extension does not even work to  allow you to see videos - it didn't for me, and a Level Three  Case Manager I know at RealPlayer said the same thing- obviously it's not the best solution and even if it allows  you to see videos, these geniuses at Firefox have not been  even telling you how to then download videos with RealPlayer  - they've  been too busy following Adobe's "pass the buck and blame  RealPlayer so just disable it" nonsense without telling what  to do next, or that there are other much better choices. RealPlayer is likely not the cause (although there is a conflict in the interaction with the Adobe update.
  

              The Best Choices are:
   First Choice:
  
           Roll Back the Update to the 10.3 version -
  

  See  links below for both Adobe's uninstaller - to first uninstall the 11.3- and for the 10.3  version. Choose the 10.3 that says "for other browsers"- this  is for Firefox. The other one is for IE Active X. IE and has to be reinstalled also because the uninstaller removes both version.
  

  Adobe clean uninstall instructions, step 4, which says to remove the additional files and folders is not usually necessary and you can be denied access to delete all files. RealPlayer also said it is not necessary. I know how to create special permissions but don't mind not because most of the users don't know how to do this - I didn't, even though I am almost certain that one of these Firefox gurus will tell you that I'm wrong. It's good to make the move, only, it can be difficult for many and it does not seem necessary for me or someone else, from what I've heard.

          Note: When you reinstall the 10.3 change the update  setting from automatic to "Never check for updates" to avoid any more problems until this is finally  fixed. Adobe already updated to the 11.3.300.262 for Firefox (which was designed to ONLY fix the crash problems and not the video viewing problems) and didn't even fix that -I don't trust anything Adobe says right now until this is  permanently fixed. And in the future I strongly urge you to  do the same, keeping it on "Notify me if there are updates" in a future version where that choice is available. If you forget, you can change the setting from  the control panel. Click on Large Icons, then Flash Player and on then the   Advanced tab and dot the lower radio button for "Never check....." in the 10.3  If you don't  get notified of a new version you can always check this forum  which you need to do anyway because any new version at this  point is going to be a beta version fix until we test it  thoroughly and I don't care who disagrees with me on that, or  what Firefox says either.
  

  Second choice:

      Change Browsers -
  

  The Adobe problem involves only Firefox. You can watch videos and download them with the RealPlayer download button if you don't want to do the restore. You can even leave the extension off RealPlayer (if that allows to see the videos) and use another browser to download (just copy and paste the URL of the video on the address bar) and the RealPlayer download button will work.

  To uninstall 11.3

     http://forums.adobe.com/message/4041846#4041846
  

  To install 10.3

     http://forums.adobe.com/thread/889580  
  
  Important Note: Remember, you have to reinstall both versions, the one for Firefox and for Internet Explorer  because the uninstaller removes both.
  
        This has worked perfectly for many others I've heard back  from - hope it works for you.
  

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to have the sidebar with thumbnails by default in the application preview? Whenever I open a PDF file, there is no sidebar.

  How to have the sidebar with thumbnails by default in the application preview?

  I'm on OSX El Capitan 10.11.3 on iMac, and whenever I open a PDF file, there is no sidebar. I have to every time click on the Sidebar icon, then select the thumbnails. I would like to be on by default, but cannot find the option or how to edit the plist file...

  If the thumbnails is checked in the menu 'View' preview, it should always open a PDF file with the open sidebar. Unless of course, it's a single page PDF.