How to release the source code (only) for first level VI?

Similar Questions

• How to get the source code of the UIShell model

  Hello
  
  We use the UiShell model in our project. The version of the UIShell model is the one coming with JDeveloper 11.1.1.6.
  We need the source code for this particular version to customize.
  
  My questions are:
  
  1. where to find the source code for this particular version (No newer or older)
  2 how get it (do we need to sign anything, for example?)
  
  Thank you

  Hello

  the SR may be presented by any person in your company who has a metalink account.
  Only the NDA must be signed by the person who has the legal responsibility to do so.

  concerning
  Peter

• How to publish the source code

  How best to publish the source code?

  I need an alternative to fall back on.  How I would go to this topic if I had to use HTML.

  My chance to validation code has deteriorated over time. I did it via:

  

  I take the plain.

  Yesterday, when I tried to insert the Bash source code.  I had a lot of white lines.  I think that leading # confused CSA.

  
  #!/bin/bash 
  
     # so anyway, output from the echo statement is sent to the terminal.  The operands < and >
     # allows you to change where it is going.
    
  
  # default redirection  
  
  # 0 stdin  -- standard input
  
  # 1 stdout -- standard output, non-error output
  
  # 2 stderr  -- standard output for error messages.
  
  # had not used the exec statement before, the concept of the exec was
  
  # readily apparent to me.
  
     
  
  # of course, I ripped this off.  Turns out you want to preserve where input stream 0 is
  
  # coming from. The hack moves input stream 0 to input stream 6.  Pick any number
  
  # that is allowed.
  
     
  
  # save standard input in file descriptor 6 
  
  exec 6<&0 
  
     
  
  # now we say where we want input stream 0 to come from. 
  
  # bash has an unknown to me number of commands that read from input stream 0
  
  # via redirection we can change were stream 0 is coming from.
  
  # redirect standard input to be from the passed file 
  
  exec 0<${1} 
  
  count=0 
  
  while read lineIn  
  
  do { 
  
  # bash syntax is bizarre.   
  
  # The (( )) says it's a math expression 
  
  (( count++ )) 
  
  echo "${count}: ${lineIn}" 
  
  } 
  
  done 
  
  # put the input streams back to where they were before. 
  
  # Nice, but when the script quits they will all be put back to where they were.
  
  # Of course, I copied this stuff.  Syntax isn't the obvious.
  
  # close input.  May not need.  My innovation.  Seems nice.
  
  exec 0<&- 
  
  # restore file descriptor 0 should be standard in 
  
  exec 0<&6 
  
  # close file descriptor 6 for reuse. 
  
  exec 6<&- 
  
  echo 
  
  echo "Total lines were ${count}" 
  

  Do you get the extra lines before applying syntax highlighting? You can simply change the Courier New font.

  #! / bin/bash

  # Anyway, Exit statement echo is sent to the Terminal.  The operands< and="">

  # allows you to change its future.

  default redirection #.

  # 0, stdin - standard input

  # 1, stdout - output standard output without error

  # 2, stderr - standard output for error messages.

  # did not use the exec statement before, the concept of the exec has been

  # obvious to me.

  # good course, I snatched it.  Turns out you want to keep where the input stream 0 is

  # coming. The cut moving the input stream to the stream input 6 0.  Choose any number

  # who is allowed.

  # Save the standard entry in the file descriptor 6

  exec 6<>

  # now say us where we want to enter flow 0 to come from.

  bash # a a stranger to me the number of commands that read from the input stream 0

  # via redirection, we can change were stream 0 comes.

  # redirect the standard input from the file passed

  exec 0<>

  Count = 0

  while reading lineIn

  {}

  bash # is weird syntax.

  # (()) Is a mathematical expression

  ((count ++))

  echo "${number}: ${lineIn}.

  }

  fact

  # put the input stream to where they were before.

  # Nice, but when the script closes they will all put back to where they were.

  # Of course, I copied this kind of things.  The syntax is not obvious.

  # entry closes.  May not need.  My innovation.  Seems nice.

  exec 0<>

  Restore file descriptor # 0 should be standard in

  exec 0<>

  # close the file descriptor 6 for reuse.

  exec 6<>

  ECHO

  ECHO "the Total of the lines were ${number}.

  TT2

• How to find the source code (package / service..) a concurrent program

  Hello
  
  
  I gives me the name of a concurrent program.
  
  Now my question is, how do I find the source code for the simultaneous progra.
  
  
  Could someone explain to me.
  
  FYI: I have full access (sysadmin).
  
  Thank you
  Prasad
  Senior Oracle Apps DBA

  PL post Details of the operating system, database and versions EBS.

  Responsibility of the system administrator, go to the competitor > program > set and search for the name of your simultaneous program. When you find it, there will be a 'the executable name' that are associated with him.

  Go to the competitor > program > executable and locate the 'name of the executable"- and you will get the information you need.

  http://docs.Oracle.com/CD/E18727_01/doc.121/e12897/T302934T458253.htm

  HTH
  Srini

• How to release the old drive letters for the readers changed or deleted hard/dvd.

  I flashed the bios for my dvd player, now windows is assigning it a new drive letter. How the old drive letter available to be reassigned?
  Thanks for any help.

  Windows Vista 32-bit & 64-bit SP2

  Hello

  Start - type in the search box-> disk CONTROL the top management - right Click-RUN AS ADMIN

  Right-click on a drive

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to specify the app is only for Android Tablet screens?

  See the topic!

  I want to find the equivalent of the definition of family of instruments for iOS but for Android. For EXAMPLE: In my XML application descriptor, I defined that the app only works on iPad and any iPhone or iPod. I want to do the same thing for Android so that it can run on a Xoom or a Nexus 7 or any other tablet that you may need but _not_ run on a phone...

  I presume it's simple, but I couldn't find the right conditions for google with!

  Thank you

  Gaius

  This article may help:

  http://developer.Android.com/guide/topics/manifest/compatible-screens-element.html

• How get/download the themes of film for first 11 elements?

  How can I get themes of more movies for the purpose of "Instant animation" in first 11 elements?  Downloaded version has only "pan and Zoom".

  pfkmd76

  Please check my blog post with all the details on first elements 11 content.

  http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html

  Essentially, the rest of the content of the program is obtained as a download from the Adobe project.

  Note the blue ban at the top of the thumbnail for the models of themes of movies, movie Menus, titles. You right click that and then decide if you want to download just a theme represented by the thumbnail or all themes for the section that you are, namely the title of movie themes templates, movie Menus.

  Please let us know if you have other questions about this.

  Thank you.

  RTA

• Need to use the source code in VB6 for a Recordset multiple connection

  Hello
  I need different types of connection in a Recordset. How to use the source code in vb6. kindly help me.

  Thank you...

  Hi Alexander,.

  The question you have posted is better suited in the MSDN Forums. Please see the following link for more information.

  Category VB

• Why can't get us the source code Freelancer?

  I understand that this is probably the wrong way to go, but since I don't know any other way, so this seems the best solution currently.

  Freelancer is a 2003 game who appreciated the merits of a hosted Microsoft 'global server' for many years. This support has been removed for more than a year, have been longer. Since then, she has in fact the players, or the community of developers, which has instead created a way not no need for this global server, while keeping the same features in the game.

  Currently there is a community of developers very involved in the game, even with it's player-base down. However, while much can be done as it is, many changes to the game requires things such as to modify the main .exe of the game, goes against the General conditions and so possibly illegal. However, Microsoft has not taken action against such a thing. The only real penalty the Freelancer community met in his history of editing has been a debacle involving a modification on the Halo theme.

  So while Microsoft has essentially removed the bulk of its support for the game, he also did nothing to stop his change, something that many are grateful.

  Ultimately, however, there are many parts of the game that most wish could be changed, but can never be the nature 'hard-coded' of such a thing, where the key to change he is locked up somewhere that we either do not have the knowledge and the ability to get to.

  There has been a lot of requests for the Source Code of Freelancer, but none have materialized. I understand that this is due to a policy that it does not give the source of his games or that the questions should be directed to the developer instead maybe Microsoft. The latter is impossible because the developer was bought by Microsoft, and subsequently dissolved.

  Ultimately the question I would ask is:

  What are the reasons for not releasing the source code of Freelancer, when he happened to so many other games such as Freespace 2?

  Linkus, your name looks familiar discovery gaming community (http://www.discoverygc.com)

  ... I must comment on your closing above statement...:

  "The end is the question I want to ask: .

  What are the reasons for not releasing the source code of Freelancer, when he happened to so many other games such as Freespace 2? »

  This is incorrect, as Freespace 2 has * nothing * to do with Microsoft, it was developed by Volition, Inc. and published by Interplay.

  These companies are not divisions of Microsoft.

  A better final statement would be asked about their release the Source codes of the franchisees Mech Commander, MechWarrior and Mech assault.

  The Battletech Franchise was a substantially larger intellectual property; and yet, they released their grip on it.

  (Although FASA / Weisman have reformed as Smith and Tinker, teaming with Piranha to do a full restart of the MechWarrior series, apparently the first deadline this year.)

  Who would actually have weight in an argument as to why they won't leave a much smaller intellectual property to the modding community.

• integration html in the source code?

  Hello

  Im trying to insert code into the source code of the site, in order to integrate specific html on the specific pages relating to specific videos, I have to sell.

  How to access the source code?

  see you soon

  Daniel

  Hello

  Please see the link below on embedding HTML in Muse.

  http://helpx.Adobe.com/Muse/topics/Embedding-HTML.html

  If you are ready to insert some code into the body, then you can use object > insert HTML code.

  If you want to put the code in the head, then you go to the page and go to Page > Page Properties > metadata > HTMl for> Paste code.

  For more options, you can check the link above.

  Concerning

  Vivek

• Required privilege to view the source code for the stored procedure

  RDBMS Version: 11.2.0.4

  Platform: Oracle Linux 6.4

  In our Production database, we have an application schema named CRM_PROD. And we have a read-only user named steve in this PB.

  Steve must be able to view the source code of all stored procedures, functions and packages in the CRM_PROD schema. But steve shouldn't be able to run these procedures, functions and packages in the CRM_PROD schema. What a privilege should give Steve for this?

  SYS is owner of the dictionary of data and tables for the source code. See configuration of privilege and role authorization - 11 g Release 2 (11.2).

  Select it no matter what dictionary grant will give user (read) access to the full data dictionary.

• Code Live is read-only and cannot be changed. Disable the direct code to modify the source code?

  HHow can I fix this error: 'reading Live is read-only and cannot be changed. Disable the direct code to modify the source code'

  Thanks for your time

  
  

  It is not an error.  That's how live code works.

• Where can I see the source code for the controller

  Hi all
  
  My question is maybe stupid to some gurus of the ADF, but many people have found that R12 Pages have a lot of code and there is not too much documentation on how to customize a controller.
  
  1. I see the *.class of my controller in the $JAVA_TOP/oracle/apps/ar/cusstd/createcus/webui/ArCreCusCO.class on my server, BUT I don't see that any of the encrypted code when I open up JDeveloper. So I guess I'm doing it wrong.
  
  2. I want to change ArCreCusCO.class. I see a lot of people say Hey I've customized XYZ controller, but how they found the code and continue to change it is the least of my headaches
  
  3. do I need to configure something in JDeveloper so I can see Server classes to my JDeveloper - what they do, if so, how you do?
  
  4. I saw something in the help page saying adding components to the Extension of the OA the devil what?
  
  Thanks to illuminate some beginners in the ADF.
  
  With the new philosophy of Java, some of those 12 developers experience that we are not starting from zero because of this new architecture.
  
  Hector. -.
  
  p.s. any entry will be taken, but do not refer to the Oracle tutorial, is an example of cake I need some practical examples ;-)

  Hi hbono99

  (1.) you can .class c above java, which is the compiled code as source code is not provided by oracle, if you need this file '.class' to see the source code for decompile, JAD decompiler 1.5.8 version will be newer .well, it would be useful to see the source code, but sometimes decompiled class create problems when trying to compile again.

  2.), you can make changes in the ArCreCusCO.class after that decompilation and compile the same thing again to generate the class file, bcz you can put only class file on the server, BUT that would be fatal to change the standard class and the concept here to come of the Extension in the image, you need to extend this class. «XYZ custom "means the extesión of the class parent and make the extension u don't need not the source.»

  3.) u cannot see the source code of a .class in Jdeveloper, there is no such a parameter.

  (4.) to extend the need to ArCreCusCO.class you to create a workspace followed by creating a project in the workspace Jdeveloper
  process to extend the class

  a.) create workspace and project
  (b) create the same package in which resides the ArCreCusCO.class under the \jdev\myprojects\ in your Jdeveloper
  (c.) right click on the project, go to create the new class, here you will find the option to metion the package where you want to put the superior (normal package starts with a xx.oracle.-) the possibility of mentioning the nmae classs that you want to extend
  (d.) click ok at the end, you will get your extended class

  e.) source code usually has two methods ProcessFormRequest and processRequest, you can add the code according to the requirement.

  extension works bcz inside the method she calls super, so all first it runs all the methods of the parent class in your case ArCreCusCO.class and then control comes in extended class, now, your code will be run, which will be accomliseh your condition

  f.) tranaser the class file file expanded to the server, add this extended class with seeded page you need to customize the page, you will find the option to add your class, mention u your class with package to compete (the way that we import the file with their package names in our source code, here import is not necessary)

  thanx

  Pratap

• Link to the source code for the module does not

  I followed this link: https://addons.mozilla.org/en-US/firefox/addon/sabnzbdfox/?src=search (with download of the source) and got a '404 error' (https://addons.mozilla.org/en-US/firefox/files/browse/76042/)

  Find the source code in another place, and when I do, how I update the broken link?

  Hello

  You can also try after some time. To search for possible temporary network problems please see: http://status.mozilla.com/

  Also, if the problem persists, try the link in a new profile.

  Profiles Howto

• Where can I download the source code of the kernel for Iconia A1-830?

  Global - download.acer.com I can only find the source code of the kernel for A1 - 810 and 811 - A1, but for A1-830 the source code isn't there.

  We do not display the kernel for all products sources, however, I sent a message to our product group to see if we have the source files, we can publish. I recommend that you check in 5 to 7 days to see if we are able to view the files.