How to restrict the use of an expired agreement?

Similar Questions

• How to restrict the use of the connection profile Anyconnect to traffic from an interface?

  Hello

  A few questions about the profiles connection Anyconnect and dynamic access policies:

  • I set up multiple profiles connecting Anyconnect with different characteristics. I want one of the profiles to be visible and usable only when the Anyconnect client connect through a specific interface (and not the outside interface). How can this be configured? As it is now all profiles are visible via all interfaces compatible VPN.
  • DAP: When dynamic access policies are configured, these will be global or is it possible to link a policy to a specific connection profile? I would like to configure the DAP Protocol to be effective only when you use a specific connection profile. What is a good way of thinking? What I want is: when a user Anyconnect choose a specific connection profile, it needs to connect using a DAP which requires membership in an ad group and existence of a local file.

  Best regards

  Thor-Egil

  • Unfortunately, you cannot restrict the interfaces of the AnyConnect fitting profile is assigned to AnyConnect connection profiles are global settings, no interface specific setttings, therefore, it will be available no matter what interface the AnyConnect is connected to.
  • DAP political work as an access list. It in the lowest priority to highest priority and he stops at the first match. For example, you can create a number of policies on what you want to match on. You cannot however force the user to authenticate to AD when they choose a specific group of tunnel. DAP is used to apply that only users that meets policy is allowed access. For example: If the user belongs to a specific ad group and also have a file exist, the user will be allowed access to use the AnyConnect. So it's the application that the user connects from a company laptop where you specified the policy, that is to say: exist in AD and have a specific file in his laptop. This is to ensure that those who try to connect to the site of the company non-portable, or internet kiosk have accessed to the VPN, because they may not be protected and can infect your corporate network, if they are allowed to access.

  Hope that makes sense.

• How to restrict the use of the CPU not exceeding 10% in particular schema...

  Hi all

  Use the Oracle 11 g R2 database.

  My question is that I have a user of scheme called 'msndp '. I want to restrict the user from this diagram of the CPU usage not use more than 10% in my database. Since this is a production database.

  any information post regarding this issue's

  Thanks in advance...

  You must assign the user profile

  ALTER USER user_name PROFILE PROFILE_NAME

  You cannot accomplish % 10 use of the processor by PROFILE

  CPU_PER_SESSION specify the time limit processor for a session, expressed in hundredths of seconds.

  you use the resource for this Manager

  Concerning

• How to restrict the running command prompt?

  How to restrict the running command prompt?

  I already know the method: HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System DisableCMD: 2

  but, but, it is possible to change reactivate cmd used much the system tool software

  So I want to deny the change of registry value by the software used, I changed all permissions to the registry [System] refusal keys with my account.

  but after a modified registry key permissions denied, disableCmd was inactivated more.

  It is impossible that the two parameter [disablecmd: dword = 2] and [{System} lock keys: administrator of the deny all permissions in my account]?

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to check the use of the ram?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  Yes, Yes... and no. All applications on your computer uses RAM, not only the pagefile or system (kernel).

  What are you really trying to do?

  See http://www.petri.co.il/pagefile_optimization.htm , especially the part under "How Pagefile your system use?"

• I'm running out of black ink, can some 1 Please tell me how to activate the use of the colors that I have left

  I'm running out of black ink, can some 1 Please tell me how to activate the use of the colors that I have left

  Read the printer manual or contact the manufacturer's technical support. MS does not print.

• If I don't get creative cloud, how will limit the use of photoshop touch?

  If I don't get creative cloud, how will limit the use of photoshop touch?

  I don't think it will limit your work with PS Touch, but could enahnce it a little.

  Just try to free membership of 2 GB and find out:

  https://creative.Adobe.com/plans

  Thank you!

• How to restrict the Subscriber to display its own feed?

  How to pass the opponent UserID to Subscriber?

  private function displayExistingStreams (): void
  {var publishers: Object = _streamManager.getStreamsOfType (StreamManager.CAMERA_STREAM);}
  status_txt. Text = "displayExistingStreams";
  for (var publisherID:String in editors) {}
  If (publisherID! = _userManager.myUserID) {}
  setUpSubscriber (publisherID);
  }
  }
  
  }
  protected function setUpSubscriber(p_publisherID:String):void {}

  currentSubscriber = new WebcamSubscriber();
  currentSubscriber.displayUserBars = true;
  currentSubscriber.connectSession = cSession;
  currentSubscriber.subscribe ();

  publisherIDs used to restrict the list of editors that this Subscriber needs to show videos for.
  currentSubscriber.publisherIDs = [p_publisherID];

  }

  Hello

  You will need to loop on userManager.userCollection user ID and get all user ID and all codes except yourself the webcamSubscriber.publisherIDs value. And you need to update this whenever the user enters or leaves the room (listening to UserEvent.USER_CREATE and UserEvent.USER_REMOVE in UserManager, if you want to dynamically maintain this list publisherIDs)

  I answered this in other forum posts earlier.

  Hope this helps

  Thank you

  Hironmay Basu

• How to set the use of video memory on the graphics card to my laptop cq56-110us?

  Hello

  I have a PC Compaq laptop CQ56-110us.  Windows 7 says is has 797 MB video memory shared from the main memory of 2 GB.  I want to reduce the use of video memory, i.e. 256MB.  Is this possible?  If yes how.  I would appreciate help with this.

  Thank you

  Don

  Don, welcome to the forum.

  Built-in memory is allocated by the system.  As more video memory is required, is allocated.  There is no way that you can change.

  If your problem is solved, please click "accept as a Solution.

• Restrict the use of data - WLAN controller

  Hello

  I am designing a solution for a hotel WiFi facility. This is mainly to provide access to the visitors of the hotel.

  I wonder bandwidth throughput on a per customer basis - which I know can be done on the controller.

  I was also asked to verify if the use of data restrictions may be implemented by the customer.

  For example, they want that the restriction of the use of 1 GB / 2 GB on their visitors, after which they are not able to access the network without additional authorization.

  Is there a way to do this on a Cisco controller?

  Thank you

  Rahul Nair.

  This doco is convenient for the speed limit:

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-BDR-limit-guide-00.html

  In addition, Rasika explains very well vs TCP UDP in a blog:

  https://mrncciew.com/2013/05/01/per-user-rate-limit-in-WLAN/

  Regarding limiting the total data of a user; I don't think it's possible with just a Cisco WLC. You would probably need some kind of third-party tool... I can't find much except this post earlier which is probably still very relevant:

  https://supportforums.Cisco.com/discussion/12101991/guest-WiFi-solution-hotel-industry

• How to reduce the use of physical memory 1 GB intel atom Win 7

  I have the Dell Insiporn Mini with the following specifications:

  1.66 ghz Intel Atom
  1 GB OF RAM
  HARD DRIVE 250 GB
  WINDOWS 7
  in the Task Manager always displays the physical memory usage about 50 to 70%. I don't have too much software installed on my laptop.
  Any body can help me to reduce the use of PHYSICAL memory...
  the use of the processor in the Task Manager is controlled to arnd 2-8%
  Thank you

  You must update your RAM to 2 GB...

  Go to Crucial.com.  This will tell you what you need...

  http://www.crucial.com/index.aspxhttp :// www.crucial.com/index.aspx

  And it will tell you how to do it...

  http://www.LapTopMag.com/advice/how-to/Dell-mini-RAM.aspx

• How to restrict the tunnel VPN Site to site traffic thrue

  Hello

  I have a tunnel from site to site, where Site 1 is the local site and main site.  and 2 the site is the remote site.

  How to limit the traffic of site 2, so that they can only reach a few IPS on the lokal site.

  But since the lokal site all IP addresses must be able to reach all of the IP addresses to site 2 (remotely).

  an access list to the 'inside' interface does not work, since all the acl is bypassed for the interfaces for IPSEC traffic.

  Then, I tried to make a political group where I only allow traffic to servers specifik, but site 2 can still reach everything on the lokal site.

  Am I missing here?

  Best regards

  Erik

  Hi Erik,

  Unfortunately, the only options that we have are VPN filters that are two-way and disabling the sysopt feature.

  If you have a core switch/router we can block traffic on this device by using the access list or null routes.

  See you soon,.

  Nash.

• How to monitor the use of the Internet (web) with installed PIX

  Hi all

  I hope that you could recommend an appropriate solution to the following situation:

  I have a client who would like to be able to occasionally monitor how his team uses the Internet - essentially the sites they visit and how much time they spend on these don't sites... no detailed report would be necessary, only occasional monitoring. Obviously, their PIX 501 must be the source of information... I guess that there is an app out there (commercial or freeware) which would collect & analyze the logs of PIX and translate them into a form that is easily understandable and advise the use of the Web.

  All recommendations / advice will be MUCH apprechiated!

  Thanks in advance,

  Sean

  It does not solve the DNS and it connects on the WHOIS database of reports to resolve outside IPs, you can set how long to keep the Cache DNS TTL (helpdful with internal clients of DHCP). If you access the web site, they show a sample report on request. You can customize reports to show a specific traffic/events. Also, you can analyze the traffic for individual IPs and each report has links to explain the Syslog events. You can have the report sent on an hourly basis.

• How to protect the use of the phone

  We have a conference room with a 7937 conference phone.  Another company is going to start sharing this room so my task is to find a way to protect this phone are not used by the other company.  Ideally, it would be a kind of PIN code on the phone itself to wake up the phone or make it able to send and receive calls.   We would like to avoid the option where we just lock the phone in a closet until they are ready to use it.

  I don't know if there is a simple solution or not.  Deployment of 802. 1 x seems like overkill, but mabye it's my own inexperience with this feature.

  All recommendations are welcome.

  How about giving the phone a dummy extension with a partition and calling search space that don't carry anywhere, then using mobility extension to sign in the phone.

  Kind regards

  YOSH

• How to restrict the movement of movieclip on the stage?

  Hi, I want to spend my movieclip to the left and right, but he moves out of the scene. I want to restrict the movement of X the width of my step.

  This is my code for the movement of movieclip:

  import flash.events.KeyboardEvent;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, moveavatar);

  function moveavatar (event: KeyboardEvent): void

  {

  If (event.keyCode is 39)

  {

  avatarmove.x += 10;

  }

  Else if (event.keyCode == 37)

  {

  avatarmove.x = 10;

  }

  }

  How do I limit the movement of X the width of my step so it won't leave the stage? Thank you.

  You have the registration point in the upper left corner. In my case, I had to focus. If you want to keep as you have, replace with this:

  import flash.events.KeyboardEvent;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, moveavatar);

  function moveavatar(event: KeyboardEvent): void {}

  avatarmove.x = Math.max (0, Math.min (stage.stageWidth - avatarmove.width, avatarmove.x - int(event.keyCode==37) * 10 + int(event.keyCode==39) * 10))

  }