How to run a script automatically whenever a file is opened?

Similar Questions

• How to run the script to EEM/TCL file

  Hello world

  I need to run the EEM script found in this link

  https://supportforums.Cisco.com/document/75806/interface-input-queue-Mon...

  Can you please point me to a HOWTO to download the file and run it under an interface?

  Thank you

  Federico

  Here is the manual how to run scripts tcl file - http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ios_tcl/configuration/1...

  In short - you download the script to switch via tftp and the tcl implementation with command tclsh interpreter. Then run the command source source

• How to run a script in environment unix and how to run this program into a toad

  Hello guys
  Please help me!
  How to run a script in the unix environment (Group of programs (cursor, programs...) stored in a file file.sql).
  
  file.sql luks like this
  
  
  WHENEVER OSERROR EXIT FAILURE
  WHENEVER SQLERROR EXIT SQL. SQLCODE
  SET the position
  SET serveroutput size 1000000
  coil ins2aais_jobs;
  SELECT "FILE IS: ins2aais_jobs' FROM dual;"
  SELECT "STARTED:' began, to_char (sysdate," YY/MM/DD HH24:MI:SS) TIME FROM dual; "
  DECLARE
  lv_upd_ct number: = 0;
  lv_ins_ct number: = 0;
  lv_exp_ct number: = 0;
  ---------------------
  
  date of lv_FROM_date;
  date of lv_to_date;
  lv_mon_or_week varchar2 (20);
  date of lv_week_end_date;
  lv_month_indicator varchar2 (8);
  -------------------------------------------------
  Aais CURSOR IS
  SELECT the ID substr (ID, 1, 7), SSN, FNAME, LNAME
  , SUCCESS, COMPENSATE, INSTALLATION
  , MODU, DRIVE, REVERSE, SUCC_RATE
  TRANS_TOTAL, FILE_NAME, WEEK_END_DATE
  RUN_DATE
  OF weekly_aais;
  
  -------------------------
  
  I aais % rowtype;
  
  
  -------------------------
  PROCEDURE p_ins (r1 aais % ROWTYPE) IS
  BEGIN
  BEGIN
  INSERT INTO AAIS_JOBS
  (ID, SSN, SUCCESS, COMPENSATE, INSTALL, MODU
  , DRIVE, REVERSE, SUCC_RATE, TRANS_TOTAL
  FILE_NAME, WEEK_END_DATE, RUN_DATE
  AAIS_FNAME, AAIS_LNAME
  )
  VALUES
  (r1.ID, r1. SSN, r1. SUCCESS, r1. COMPENSATE, r1. INSTALLATION, r1. MODU
  r1. DISK, r1. CONVERSELY, r1. SUCC_RATE, r1. TRANS_TOTAL
  r1. File_name, r1. WEEK_END_DATE, r1. RUN_DATE
  r1. FNAME, r1. LNAME
  );
  lv_ins_ct: = lv_ins_ct + 1;
  EXCEPTION
  WHILE OTHERS then
  DBMS_OUTPUT. PUT_LINE ('ERROR IN THE INSERT STATEMENT');
  DBMS_OUTPUT. Put_line (SQLERRM);
  lv_exp_ct: = lv_exp_ct + 1;
  END;
  
  END;
  
  ------------------------------
  
  PROCEDURE p_disp_msg IS
  BEGIN
  DBMS_OUTPUT. Put_line (' number of insertion: ' | to_char (lv_ins_ct));
  DBMS_OUTPUT. Put_line (' number of Exceptions: ' | to_char (lv_exp_ct));
  
  lv_ins_ct: = 0;
  lv_exp_ct: = 0;
  END;
  
  ---------------------------
  
  BEGIN
  
  lv_FROM_date: = to_date ('& 1', 'DD-MON-RR');
  lv_to_date: = to_date ('& 2', 'DD-MON-RR');
  lv_mon_or_week: = 'and 3';
  
  lv_month_indicator: = di.get_month_ind (lv_mon_or_week, lv_FROM_date, lv_to_date);
  
  ------------------------------------
  
  REMOVE FROM AAIS_JOBS
  WHERE WEEK_END_DATE = lv_to_date;
  
  -------------------------------------
  
  COMMIT;
  
  Aais OPEN;
  LOOP
  EXTRACT the aais IN i;
  OUTPUT WHEN aais % NOTFOUND;
  BEGIN
  p_ins (i);
  END;
  END LOOP;
  Aais CLOSE;
  
  commit;
  
  DBMS_OUTPUT. PUT_LINE ('INSERT INTO TABLE JOBS AAIS');
  p_disp_msg;
  
  
  -----------------------------------
  
  END;
  /
  SELECT "FINISHED: ' | '. TO_CHAR (sysdate, "MM/DD/YY HH24:MI:SS'") FROM dual
  /
  spool off
  "exit";
  
  
  and also how we organize this into a toad?
  
  
  Thank you.

  Hello

  You vous connecter connect to oracle through unix and SQL prompt, run these commands in a .sql file.

  Toad, you can run the instructions individually by selecting the sql statements or in a set with the F5 key.

  Kind regards
  AJR

• How to run a script for all the images in a folder?

  How to run a script for all the images in a folder?

  You can assign your script to an action, then use processor by batch or image with the option apply to all subfolders.

• How to create the script to compile procedure files in oracle - urgent deadline...

  How to create the script to compile procedure files in oracle.    about to go live and have much .prc pkg in a directory usr/tmp/ar... Po... human resources etc. need to create a script to compile all the files in the folder, then do not open all necessary .prc suggestions on how to do it.   Thank you Tom.

  (1) an urgent need, ASAP,... are words that do not in a forum of volunteer. We are here to help if you need it now, for free, open a SR.

  (2) oracle procedures are not files.

  (3) I think you are trying to run operating system packages, no Oracle procedure. right?

• How can I fix the problem of 'linked file' when opening file on other computers?

  How can I fix the problem of 'linked file' when opening file on other computers?

  The links must travel with the illustrator file. In other words, you can't send someone your page layout and not send them all the assets placed in the layout. However, you can embed links, but their incorporation will make your file much more available.

  Use the links Panel to incorporate images. Click on the small icon in the upper right corner of the control panel link drop-down list. I've included a screenshot.

  

• Run the script automatically when Windows goes into hibernation or wakes up?

  Hello

  I use the group policy feature in Windows XP to run scripts automatically when you open a session or logoff.

  But it is also possible to make a script run automatically, whenever a Windows-xp machine is about to Hibernate? And also when it wakes up from hibernation?

  The clues how to proceed?

  A funny hibernation is that if you put into hibernation and power then upwards and don't 'do' nothing - like press a key or move the mouse (just to sit and watch), in 300 seconds (5 minutes), XP will go back into Hibernation automatically.  Try it!

  XP does because after it comes out of Hibernation, if XP detects that there is nothing to 'do', he thinks he might be from Hibernation by accident and goes back to "sleep" and said "why you wake me up?

  That's why when people hibernate during the night and their machine turn on the morning he wakes up, they make their coffee or breakfast and return later to see that they have the power of their machine again.  If they think something is wrong, but things are working as expected.

  One way to fix this, is to use a third-party tool that uses the command line to simulate a mouse movement.   It is enough to prevent the rehibernating while you are on XP.

  To simulate a movement of the mouse as soon as your system is equipped with Hibernation, you will need to download the nircmd.exe file.

  There are many other utilities of vouchers on NirSoft main page:
  http://www.NirSoft.NET/

  To simulate the movement of the mouse, download the file nircmd.exe here

  http://www.NirSoft.NET/utils/nircmd2.html

  Put the nircmd.exe file in a folder which is somewhere in your path (c:\windows\system32, etc.) or consult the path in your command file. I put the nircmd.exe file in my c:\tools folder where I keep other things.

  If you do not have Hibernate enabled in your Power Options, tab hibernation, it will put your system on Stand-By instead of Hibernation.

  Create a batch file (I called mine hibernate.bat and put the nircmd.exe in my c:\tools folder) and put this line in your hibernate.bat file:

  off @echo
  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate
  c:\tools\nircmd.exe 10 10 movecursor
  movecursor-10 c:\tools\nircmd.exe - 10

  Save the new file hibernate.bat on your desktop or somewhere, you can retain and double-click it to run the batch file.  When you are sure that it works very well, and then drag the new desktop icon to your quick launch area (to the right of the button start), change the icon, rename, etc, so it looks a bit better and then you can click on new quick launch when icon to call the file hibernate.bat.  Now just remember to use the hibernate.bat file (which could be on your desktop with a nice icon) instead of the menu to turn off the computer.

  The first command will put the system into hibernation, and then when XP comes from hibernation (even days later), run the following commands in the batch file.  These last two commands will simulate a slight mouse movement and who will deceive XP into thinking there is a reason to get out of hibernation and it will not go back to sleep.  Then when you come back from your coffee, your system is always waiting for you.

  If your case, your hibernate.bat might look something like:

  off @echo
  order 1 run before hibernation
  2 run before hibernation command
  order 3 to run before hibernation

  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate

  order 4 to run when coming out of hibernation
  command 5 to run when coming out of hibernation
  order 6 to run when coming out of hibernation

• How to run the script with parameters such as alarm action .ps1

  Hello

  I know not how to configure alarms, I know that I can point to monitor cluster for changes (via the GUI), but... I have different groups and I would like to set an alarm by vCenter which monitors cluster for changes. Let's call it "RefreshCapacityInfoOnExternalDB".

  So, lets just say. I would like to run my script whenever a virtual computer is added, Reconfigured or ESX host are removed, added in a Cluster. The alarm would launch the .ps1 script written in turn the ability to update external db cluster info.

  Shortly said: ability to cluster values are changed

  What I need is this: run the script-> CapacityInfoRefresher.ps1 < Cluster_name_where_ReconfigEventsTookPlace >

  I guess that, first I need an environment variable (if it exists) that can be used as a parameter for the < Cluster_name_where_ReconfigEventsTookPlace > placeholder script. Right?

  Chapter 16 of the book of LucD & Friends "PowerCli reference" mentions some environment vars but I'm stuck. Anyone using these options?

  THX

  A.S.

  You can set your alarm on the node above in your vCenter tree, this way it will be active for all collections in the vCenter.

  These alarm environment variables are automatically available for your alarm script when it is triggered.

  These environment variables, you will be able to determine to which cluster the alarm was pulled.

  So I don't think that you need to pass this information as a parameter to the script.

  Perrhaps you could share what exactly alarm you want to set and what looks like the script which should trigger alarm.

  And Yes, I use these environment variables in scripts of alarm

• How to run a script?

  I'm new on this bear so with me

  I would like to run this script to list all virtual machines and their data warehouses, but I don't know how to make it work lol... Please help thanks

  $report = @() 
  $allvms = Get-VM 
  foreach ($vm in $allvms) { 
          $clusterName = ($vm | Get-Cluster).Name
          $dstores = $vm | Get-Datastore 
          foreach($ds in $dstores){ 
                  $row = "" | select VMNAME, DATASTORE, Cluster 
                  $row.VMNAME = $vm.name 
                  $row.DATASTORE = $ds.Name 
                  $row.Cluster = $clusterName
                  $report += $row 
          } 
  } 
  $report | Export-Csv "C:\vm_ds.csv" -NoTypeInformation

  Of course, to get the information to the VMDK to a simple VM VMDK, just add

  $vmdk = ($vm | get-hard drive)

  $row. VMDKSIZE = ($vmdk. CapacityKB) / 1024/1024

  $row. VMDKFILE = $vmdk. File name

  in the loop where you're collecting information.

  You probably want to get the information for all the vmdk and for that you will need to browse all the files on disc - Get-HardDisk returns an array of VMDK when there is more than one.  Depending on how your output are collected, which could be interesting.

• How to run a script in the idle task

  Hi all

  Successfully, I wrote and performed a routine of idle task that periodically executes a simple method. now, I need to add a feature to this method so that it performs a simple javascript.

  Here is my code:

  ...

  UInt32 myTestIdleTask::RunTask)
  UInt32 appFlags, IdleTimer * timeCheck) {}
  If (appFlags &)
  (IIdleTaskMgr::kMouseTracking
  | IIdleTaskMgr::kUserActive
  | IIdleTaskMgr::kInBackground
  | IIdleTaskMgr::kMenuUp))
  {
  Return kOnFlagChange;
  }

  This-> runTestScript();

  Return kmyTestFvExecInterval;
  }

  
  

  void myTestIdleTask::runTestScript() {}

  This is the test script
  

  PMString myTestScript ("app.activeDocument.exportFile (ExportFormat.pdfType, File(\"/Users/testuser/testing.pdf\"),false);" ');

  I think that I should call CScriptRunner::RunScript()
  somewhere here but without success
  

  }

  Any help on how to run the Javascript code for myTestScript from the runTestScript() method?

  Thanks in advance,

  Halin

  Already, I solved my problem by using "IExtendScriptUtils".

  For those who are interested, here is my solution:

  void myTestIdleTask::runTestScript() {}

  This is the test script

  PMString myTestScript ("app.activeDocument.exportFile (ExportFormat.pdfType, File(\"/Users/testuser/testing.pdf\"),false);" ');

  PMString engineName ("myengine");

  Int32 errorCode is Utils()-> RunScriptInEngine (engineName, myTestScript);.

  }

  Good luck.

  halin

• How to run a script php on external server

  Hello!

  Here's my problem: I want to run a script php on a server by calling a simple url. Here is an example of a possible url: http://servername/dir/scriptname.php?var1=a&var2=2.

  The return value is a html code.

  I use CVI 2012 AND 3.5!

  Hello!

  Thank you very much! It's the way I'll do it!

  But I have to call a different get command. Here's my way: Fmt (tlsend, "%s %s", "GET" ', http://servername/dir/scriptname.php?var1=a&var2=2 ');

  The next problem is the response of the InetTelnetRead. She returns with-4 "system socket error". But the result of the php-script is tlread.

  So my problem is almost solved!

• How to run a script as administrator and copy some setting of the connected user's profile?

  I want to copy some profile setting to the connected on folder (% userprofile%\AppData\Roaming\Microsoft\Word) user profile password when they connect. Because the standard user accounts do not have the right admin to copy files to the folder, so I use schedule a task to run the .cmd as local administrator every time that a user login. But, when I use the % username % setting to try copying the file to the logged on user profile, the setting of % username % is interpreted as the name of the local administrator because the scheduled task is run as administrator. Therefore, the file is exemplary in the local Administrator profile. All solutions? Thank you

  I log on as a user account standard and do a right-click the .cmd and run as admin. The script interpreter .cmd parameter of % username % as the admin because I ran as administrator.

  -> Not altogether. There are two cases:

  • You are connected under an administrator account. When you right click on cmd.exe, then you get a 'high' console session that is still running under the name of your current account.
  • You are connected under a regular account. When you right click on cmd.exe and then you get a prompt and admin account name and its password. The new session is running under admin account.

  Is there a way to set the parameter to % username % as long as the logged on user, when you run the .cmd as an administrator.

  -> No - see above. Execution of a session high under a regular user account would defy the principle of administrator accounts.

  Either of these two options, I gave you in my previous answer might work, with a bit of scripting. A much simpler method would be to restore the default permissions to the %userprofile%\AppData\Roaming\Microsoft\Word folder. Normally full, users have access to it. This is my preferred option. With the help of a scheduled task that is running under an administrator account is a kludge.

• How to run specific scripts of site for a virtual machine?

  I need to run a script that will update the virtual machine IP to DNS server.  I intend to use the dns_update.cmd.

  1. can I create stimulus steps that are specific to the site?

  2. don't VMware SRM SDK provides what API s to determine the name of the Site?

  TIA,

  Sudhir

  > 1. Can I create stimulus steps that are specific to the site?

  SRM provides environment variables to scripts step command that will allow you to do. See variable environment for the ordering steps in the administration guide for more information on variables.

  The key variable is the variable 'VMware_VC_Host '. You can use this variable in your script to perform different actions depending on which VC you get to.

  > 2. VMware SRM SDK provides APIs that s to determine the name of the Site?

  Yes, I'm not sure why you would do that? Typically, you call the SRM API to a stage of order recovery plan. You can share what you intend to use these methods for?

  Discover the methods "GetSiteName" and "GetPairedSite" in https://www.vmware.com/support/developer/srm-api/srm_58_api.pdf

• How to run a Script in Vcenter Orchestrator... ?

  Hi team,

  
  

  I m starting to VMware Vcenter orchestrator. I installed Vcenter Orchestrator autonomous set up in my test environment to Windows server 2008 R2. I want to run a script in a client application to vcenter orchestrator.

  
  

  But I was unable to run the script in Vcenter orchestrator. I m getting after that error"you are not allowed to run the local process '.

  
  

  I couldn't configure vCO to allow execution of local processes & cALTER vCO to allow access to file system to the scripts folder:

  
  

  To configure the VCO to allow running local process:

  • Go to/app-server/server/vmo/conf
  • Edit the file vmo.properties and Add (if not already done) the following line to enable

  com.VMware.js.allow - local-process = true Set up VCOs to allow file system access to the scripts folder:

  • Go to/app-server/server/vmo/conf
  • Edit (or create if it does not exist) the file js - io - rights.conf
  • Assuming that the name of a "Orchestrator" on a device folder, enter the following (set at will for windows):

  But in my server I found no record of the server app-server... Please someone help me on this to solve the problem.

  
  

  Kind regards

  Odile M

  If the file does not exist, you can create simply as described here: http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.vco_administer.doc_42%2FGUID-C9F6748A-32F9-4712-99EB-3A48BFFDF5E9.html - this is a plain text file.

• How to run a script from a "Button 1" button?

  Hi all, I had this problem to have a window with several buttons named "Button 1" "button 2"... and run the script 'Script A' If you click on button 1, the script 'Script B' If you click on the button 2, etc... ".

  Here is my small script:

  indesign #target

  create a table of contents that send directly to the good script

  var l = new Window ("dialog");

  var buttongroup = w.add ("group");

  var panel = buttongroup.add ("panel");

  var button1 is panel.add ("button", undefined,"Script");.

  var button2 is panel.add ("button", undefined, "Script B");.

  var button3 is panel.add ("button", undefined, "Script C");.

  var cancel = buttongroup.add ("button", undefined, "Cancel", {name:'cancel'});})

  buttongroup.addEventListener ('click', press)

  w.Show ();

  function press (e) {}

  {if(e.Target.type=="Button")}

  If {(A e.target.text is "Script. »)

  w.Close ();

  app.doScript (new File("c/scriptA.jsx"),ScriptLanguage.javascript);

  }

  Else if (e.target.text == "Script B") {}

  app.doScript (new File("c/scriptB.jsx"),ScriptLanguage.javascript);

  }

  Else if (e.target.text == "Script C") {}

  app.doScript (new File("c/scriptC.jsx"),ScriptLanguage.javascript);

  }

  }

  }

  Each manuscript A, B and C starts with an app.dialogs.add)

  And that is the problem, he said that an alert or a modal dialog box is already active

  I tried the w.close (), but it does not work...

  I don't think that addEventListener is what I need, maybe I'm wrong for a window, but it is the only way to give names to the buttons, is it not?

  Instead of var this:

  w = new Window ("dialog");

  Use this:

  var l = new Window ("range");

  Peter