How to send 2 bytes per uart data

Similar Questions

• How to send a single code of hexa from 1 byte with sending VISA for every 500 ms?

  Hello

  I would like to send only a 1-byte hex code in LabVIEW to an external device using RS - 232 (300 bps, 8 data bits, no parity bit, no flow control) every 500 ms.

  The TX pin on the computer should stay at the logical level 1 once he finished transmitting the 1 byte of data and wait before transmitting again 500 ms.

  I'm building a test below code:

  

  The output of "Channel 1" will connect in the sending VISA write buffer. (Please note that the code above does not include the 500 ms delay I mentioned. Just ignore for a moment.)

  This code will work like what I described above? I tried on my project, but I was getting weird things on the device.

  Convert the code hex correctly?

  And how to send it VISA pass in the string? Does include the other 'useless' strings with the hex code that I want to send?

  Any help will be appreciated.

  Thank you.

  Hi eddiechai...

  you will get a string of length 2, so you have 2 bytes. You must use the U8 and the cast function type. (see attached photo). You have to disable the stop character to get what you want.

  Mike

• How to send data from the client to the server using tcp

  1. as I am new to watch I need help with sending data from client to server. I went through various examples of labview, but each of them also explains transfer of data to the client server. But I need help regardng send data from the server to the client.

  2.i would use the data type variant for sending my data.

  Can someone help me please. Thank you

  Regardless of the meaning. Once you have a connection each end allows it to send data to another. Just create what you want to look like interaction.

  Do you want the client sends a command that request data?
  How do you think the response data to look like?

  You can send variants, but probably not worth the effort.

  Mike...

• How to send other linguistic data to the server using Http

  Hello

  How can I send data to the server except English other languages how to send to the server. Please someone help me it's urgent.

  Thank you

  Kind regards

  Bharath kumar

  Peter cool.

  problem fixed

  I use postdata String = new String (textField.getText (.getBytes("UTF-8")));

  Thank you

• How to send data in eloqua with using ajax?

  Hello

  someone tell me how to send data using ajax?

  Thank you

  Rahul

  Hi Rahul

  Using this code to send data to AJAX

  $.ajax({)

  URL: ' your action? elqformname = name of the form eloqua & elqSiteID = eloqua site ID',

  type: 'POST',

  data: "field name =" + document.getElementById('field_id').value + "="+ document.getElementById('field_id').value field name,

  success: {function (html)}

  }

  })

  Thank you

  edynamic expert Eloqua

• Does anyone know how to change windows to recognize the disks with 520 bytes per sector? Or one knows if Windows 7 will recognize no 512 bytes per sector drives? Reader vendors will move to larger areas in the future.

  Windows does not recognize disks that are not 512 bytes per sector. Put readers at the point as unknown and I can't access it through the operating system. Is there something I can change to get Windows to recognize the disks that are not 512 bytes per sector?

  Hello MetalRain,

  Thank you for your message.  Are you able to see the disks in disk management?  Try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  On the right, you see your drive?  If so, you can right click and it assign a drive letter.
  Now you should be able to close this window and you can format your drive to NTFS, you can specify to change the bytes per sector 512 if you wish as seen HERE.
  After assigning a drive letter, follow the steps below:
  Click "Start" > click "Run" > type cmd in the text field and press "Enter."
  In the command prompt, type format c:/FS: NTFS / a: 512 and press "Enter."
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to send email with an attachment in Groovy?

  I have a user that is running remotely a groovy script to extract data from the Foglight Server.   When it executes this script, it has the ability to create a data file on the Foglight Server.  I would like to add a feature where this data file is sent to him and others.

  So far, I have this:

  email = new com.quest.nitro.service.sl.interfaces.email.EmailRequest ();

  email.setRecipients (containers);

  email.setSubject (subject);

  email.setBody (body);

  Server.get("EmailService").sendmail (email);

  I looked at the documentation of the API and see setAttachment() method, but I don't know how to use it.  Could you please show a sample of how to send an email with an attachment (data file is a pure text file) using Groovy?

  Thank you.

  Hi Fred -.

  Here's an example code that I have work. It should be suitable for files that are not too large:

  /***************************

  request.setBody ("Message body");

  request.setSubject ("subject line");

  request.setRecipients ("[email protected]");

  text file you want to send as an attachment

  FileInputStream fis = new FileInputStream("C:/textfile.txt");

  buffer of bytes to hold the attachment - to ensure that its larger than the size of the file

  Byte [] b = new ubyte [30000];

  read the bytes of the fileinputstream, stuff on the accessory to set the mime type and give

  Enter a file name for the e-mail client to use

  FIS. Read (b);

  request.setAttachment (b);

  request.setAttachmentMimeType("text/plain");

  request.setFileName ("emailAttachmentFile.txt");

  ready to go!

  emailService.sendMail (request);

  ********************************/

  I hope this helps.

  Robert

• How to send the picture of u with labview

  Hello

  How to send table unsigned 32-bit via UDP.

  How to convert the 32-bit unsigned byte array table.

  
  

• I've set up a new account of emal that the original has been hacked. I want to inform all my contacts the new email. Hotmail only allows me to send 9 emails per day until I verify my account.

  I've set up a new account of emal that the original has been hacked.  I want to inform all my contacts the new email.  Hotmail only allows me to send 9 emails per day until I verify my account.  Box for this constantly, says 'problems', try again in a few minutes.  This lasted for more than 12 hours!

  How to check my e-mail account so that you can send to all my contacts at once and send emails to more than 9 per day.

  Thank you.

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to send a URL from LabView

  I wrote a personal weather station application.  Now, I would like to upload data to Weather Underground by their wiki to PWS - download Protocol. Basically, that said send the string below:

  http://rtupdate.wunderground.com/weatherstation/updateweatherstation.php?ID=KCASANFR5&PASSWORD=XXXXXX&dateutc=2000-01-01+10%3A32%3A35&winddir=230&windspeedmph=12&windgustmph=12&tempf=70&rainin=0&baromin=29.1&dewptf=68.2&humidity=90&weather=&clouds=&softwaretype=vws%20versionxx&action=updateraw&realtime=1&rtfreq=2

  When I cut and paste a similar string from my LabVIEW application in a browser, the chain is correct and works fine.   However I was not able to send the succesfully chain of Magnatune.

  The post How to send an HTTP request to a web server using the TCP functions?  seems to apply, but I succumbed to my request.

  Any help is appreciated.

  Hi Dave,.

  I can´t what exactly must send, but you can find. You can use a TCP/IP Analyzer or the attached Web server.  Run the WebServer.Main.vi and call your site with all of your settings on your browser with one change. Connect to locahost instead of the server you really want. First press the Start button, use show history vi, see the dynamic loaded vi. Open it. You can see everything you send from the browser to the Web server, and it's what to also send later to your real webside.

  It will be useful.

  Mike

• fsutil: bytes per physical sector: &#60; not supported &#62;

  For all my discs, regardless of the brand or the connection is USB or ATA, fsutil returns bytes per physical sector:

  This is a problem when I want to create a mirror for Raid1 disk: I get an error because my two disks have a different physical sector size.

  I use Windows 7 pro 64-bit SP1, I checked that KB982018 , which is supposed to solve this problem has been installed, my disk drivers are up to date.

  Thanks for your help!

  Hello f. Palangie,.

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• How to send XML using UTL_HTTP

  I try to drive, how to send XML data to a webserver using UTL_HTTP, but I get no answer

  I need to present the following document to server 'http://api.fastsms.co.uk/api/xmlapi.php' XML instructions are "the XML Document must be posted not coded, with a game like"xml"of UTF-8 character set parameter"

  If I submit the following in their test form XML

  <? XML version = "1.0"? >

  < apirequest version = "1" >

  < user >

  < username > * USER * < / username >

  password <>* password * < / password >

  < / user >

  < application >

  < name > Application example < / name >

  < version > 1.0 < / version >

  < / application >

  < inboundcheck lastid = "10711399" / >

  < / apirequest >

  I get a response XML returns with the messages in my Inbox.

  This is the code I'm trying to use to accomplish the same thing about PL/SQL: I know an answer just as soon as there is simply no content - header information.  What I am doing wrong?

  l_xml VARCHAR2 (5000);

  Utl_http.req req;

  resp utl_http.resp;

  HostHeaderName VARCHAR2 (256); -Name of the response header

  header_value VARCHAR2 (1024); -Value of the response header

  response_text VARCHAR2 (4000); -Response body

  l_url VARCHAR2 (100);

  BEGIN

  l_xml: = ' xml = <? XML version = "1.0"? > ';

  l_xml: = '< apirequest version = "1" >';

  l_xml: = '< user >. "

  l_xml: = ' < username > * USER * < / username > ';

  l_xml: = ' < password > * PASSWORD * < / password > ';

  l_xml: = ' < / user > ';

  l_xml: = '< application >. "

  l_xml: = ' < name > Application example < / name > '.

  l_xml: = ' < version > 1.0 < / version > ';

  l_xml: = < application "/ > ';

  l_xml: = ' < inboundcheck lastid = "10711399" / > ";

  l_xml: = ' < / apirequest > ';

  -Connection HTTP open

    l_url := ' http://api.fastsms.co.uk/api/xmlapi.php';

  Req: = utl_http.begin_request (l_url, 'POST', utl_http. HTTP_VERSION_1_1);

  -Set headers for type and length

  Utl_http.set_header ("req, 'Content-Type', ' application/x-www-formulaires-urlencoded");

  Utl_http.set_header (Req, 'Content-Length', to_char (length (l_xml)));

  -Write the setting

  Utl_http.write_text (Req, l_xml);

  -Reading response file

  resp: = utl_http.get_response (req);

  -Print the response headers

  BECAUSE me in 1... Utl_http.get_header_count (resp) LOOP

  Utl_http.get_header (resp, i, header_name, header_value);

  logging_pkg.info(header_name ||) ': ' || header_value);

  END LOOP;

  -Print the response body

  BEGIN

  LOOP

  Utl_http.READ_TEXT (resp., response_text);

  logging_pkg.info (response_text);

  END LOOP;

  EXCEPTION

  WHEN utl_http.end_of_body THEN

  logging_pkg.info ('end of body');

  END;

  -close the http connection

  Utl_http.end_response (resp);

  EXCEPTION

  WHEN utl_http.end_of_body THEN

  Utl_http.end_response (resp);

  END;

  See you soon,.

  Brent

  The fact that you do not receive a response of HTTP (headers) return, means that a basic communication worked. After reading the response:

  answer: = utl_http.get_response (request);

  Check the HTTP status code:

  If response.status_code...

  You should get a HTTP 200 for a successful call. May be that you run in a 50 x results, which implies a server error has occurred processing your HTTP call.

  Best bet to see the error on the server is the access log and/or Apache error.

  Oh yes - XML submits work very well through UTL_HTTP. Take a look at the sample code in https://forums.oracle.com/message/10450611#10450611

  In what concerns the validation code and using the syntax highlighting - edit, click use the Advanced Editor, highlight the code and click on the > on the toolbar to access the text highlighting the menu. Unfortunately this does not use fixed fonts - again. I hope that this will be corrected as forum features are addressed.

• How to send mail from APEX 4.1?

  Hi all
  In APEX 4.1.
  I have a form based on the Leave_table,
  It has 5 fields,
  If the user has filled in all the fields and clicked the APPLY/SUBMIT button the data will be stored in the LEAVE_table.
  
  Is it Possible to send the mail with the data entered in the form of a report to a particular mail_id (manager)?
  and also mail to contain two link/button to REJECT or APPROVE the leave requested?
  Is this possible in the apex and how it can be done?
  Thank you.
  Kind regards
  Gurujothi.

  Try adding your code to PL/SQL processes

• How to send a document in net. HTTP.request as a POST variable?

  I have read and reread the doc on the net. HTTP.request and he says I can pass an argument to oRequest, but I failed to pass in the current document, which is what I want to do.

  I tried app.activeDocs [0], or the encoding of a string, but if he makes the call with no error, nothing is sent.

  ORequest must be a single document, or a variable consisting of name-value pairs? How to send multiple parameters to a POSITION otherwise?

  I did very well with the call using GET, but when I tried to send the document as a GET variable, I did nothing either.

  I send to an end point of LiveCycle REST so either POST or GET is fine.

  Thank you!

  Validating the document current is simple * provided * your script runs outside the context of the document (i.e. in the console or a script to the folder level). There is no access to scripts of doc-level for obvious reasons.

  For example, put this in the console JS OCCURS the current file to a URL:

  Net.HTTP.request ({}

  cVerb: 'POST',

  cURL: "http://localhost/submit.php."

  oRequest: Collab.documentToStream (this);

  oHandler: {}

  answer: function (msg, uri, err) {}

  If (err! = undefined) app.alert (msg);

  }

  }

  });

  Your problem talking to a vanilla Web service, is that you can send the RFC1867 delimiters (i.e. the form apply for "multipart/form-data") that the ReadStream object is not a method of concatenation in the JSAPI Acrobat. It's also how you would usually precede other fields in the form, but if you are careful with your codes side server that you can send to save them as GET parameters in cURL. Normally, you'd be polite and passed a context of Type in the table of aHeaders header - it won't matter for the transmission process, but will allow your webservice predict what that heck he was sent.

  Your webservice will then read the raw data. PHP for example, you will get nothing in the $_FILES global, but you can grab the PDF by reading all of the input buffer, with the line:

  $pdf = file_get_contents() ("php://input");

  If this line was in the server script which was the JS code above, the variable $pdf will contain an exact binary copy of the currently opened document.

• How to send a message between two custom components

  I have a datagrid in a custom cuomponent that is.

  < mx:Canvas id = "customerGrid".
  Width = '100% '.
  Height = "350" >
  < customer: CustomerGrid / >
  < / mx:Canvas >

  < customer: CustomerDetail / >

  The < customer: CustomerDetail / > has a TextInput. How to send a message to < customer: CustomerGrid / > to < customer: CustomerDetail / > when you click the datagrid control. When a user clicks the selectedItem I want this detail to display in the TextInput, which is in another component.

  I'm looking in Restaurant Finder sample. He uses exactly as I wanted to do. However, it uses a kind of AccessibleText. Is there somewhat easier to implement.

  Thank you

  One way to do this is to use the property data, most of the components inherit and use links between the custom grid and the detail view.

  
  Width = '100% '.
  Height = "350" >
  
  

  Now, in the light of the foregoing, I assumed that CustomerGrid is actually extending DataGrid, if this isn't the case, you will need to add additional logic to CustomerGrid. You will need to define a public property to the value of the selected item in the DataGrid inside the CustomerGrid and make it Bindable (see docs: metadata that can be related).

  Inside the CustomerDetail, bind the TextInput property data, by setting the property in the data object to which you want to display.

  Say the selectedItem (in the DataGrid) has a customerName field, you would do something like that (inside CustomerDetail).