How to separate in CP virtual machines (VM) to other machines of material?

Similar Questions

• How to make a Java Virtual Machine to work in 64-bit version of Windows 7

  How to make a Java Virtual Machine to work in 64-bit version of Windows 7

  Download you Sun: http://www.java.com/en/download/index.jsp

• How to run the VMWare virtual machines in Microsoft Azure cloud?

  How to run VMware Windows Virtual machines to Microsoft Azure cloud?

  Thank you

  Vincent

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to locate a new virtual machine on a different hard disk

  VMware Fusion 3.1.1 (282344) Mac OS 10.6.4.

  I have a few virtual machines on my boot drive and am running out of space. I want to create a new Win 7 vm on a drive different but can't seem to figure out how to tell VMware to put there. I know I could create in the normal location on my boot drive and move it, but I didn't Go on the boot drive for this.

  How to create the new virtual machine on the new drive?

  Thx for advice,

  Ken

  As you walk through the Wizard New VM and you arrive at Cap sheet, you have two choices...

  One is to select the Customize settings button and the other is just click the Finish button.  Each choice made appear to save to: dialog box and you can pick any location you want.  Note that you may need to click the down arrow located right of save it under: text box to expand this worksheet to display all the options.  BTW, clicking on this button is the standard behavior of OS X and has nothing to do with the VMware Fusion in itself.

  Post edited by: WoodyZ

• Take a snapshot of a lun SAN: How do I disassemble the virtual machine?

  SAN is FC 9958E Hitachi, ESX 3.5 update 2.

  I try to take a snapshot of a lun (with a virtual machine in this regard) san and must turn off the virtual machine and disassemble the VMFS virtual machine so I can do that there is no I/O will the lun when I take the snapshot.

  How can I (of) a virtual machine of the VMFS without making the other virtual machines running in the same cluster? I know that the VMFS is a system of shared files grouped campaigns, exclusive property of vmware. Does anyone know the command to use?

  If anyone has any info on this subject, it would be great.

  This is the documentation is 1.5 ESX, released in 2002.

  The command no longer exists in recent versions.

  -Matt

  VCP, vExpert, Unix Geek

• How access host files to virtual machine, host is Windows Vista and Red Hat Linux virtual machine?

  Please can you let me know them below, thanks, really appreciate your help on this.

  How access host files to virtual machine, host is Windows Vista and Red Hat Linux virtual machine?

  Thank you and best regards,

  Sam

  The RPM of samba must exist in the CD of RHEL itself. in any case, you can use winSCP tool to your windows host.

• Roles of server separate from the virtual machine on a server?

  Hello

  I'm currently learning the server admin so please forgive my ignorance.

  I bought a server and got Win Server R2 2012. Im trying to focus by trial and error and so want to install multiple roles - that I know is not recommended because some may conflict or cause additional problems etc etc - I am not in an operational environment, but trying to imitate such.

  I've read elsewhere that you can put different roles of server on the individual virtual machines - say, for example, the print server role is on a VM that is separate to a file server role, and she needs to be restarted or goes down for some reason any you loose a single service.

  My questions are the following:

  Is this possible?

  Is this desirable?

  Whats software is used to implement this if yes?

  Hyper-V can be used?

  Thank you in advance.

  Fethimidou2006.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to connect to a virtual machine remotely.

  How to connect from my PC (windows xp) homepage to my PC(windows xp) desktop with a virtual machine.

  I want to connect to this virtual machine from home. How to do this? What are the steps?

  Thank you.

  Hello

  When you configure the virtual computing, r put his network card to use the host adapter.

  In this way, the virtual machine will get the IP address of the router and will basically act as if the Chickadee is an independent computer in the network.

  As long as the host computer and the virtual computer on and don't go to sleep, you can connect to each on its own through the network.

  or on the Internet.

  http://www.Microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I move the "Virtual Machines" folder to the My Documents folder?

  VMwareFusion is to put the "Virtual Machines" folder in the Documents folder in the home folder (/users/ [username] / Documents), how can I move elsewhere (as/Library/Application Support)? The user Documents folder is not the right place for automated it system files, it is intended for personal documents.

  
  

  I am running VMware Fusion on OS X Yosemite (and the virtual machine is Windows 7).

  You can keep your virtual machines anywhere you want. Here are the steps to move:

  1 exit VMware Fusion. You can stop first of all of your running virtual machines.

  2. drag your virtual computers folder or the individual VM "files" where you / them. Filenames usually end in ".vmwarevm". There is no need to call the new folder "Virtual Machines" - you can call it anything you like.

  3. Launch VMware Fusion. If the library of the Virtual Machine window is not open, open it (Windows menu-> Virtual Machine library).

  4. ensure that all of your icons for the virtual machine are light gray and say "file not found".

  5. right click on each virtual machine in turn, and select Remove. When you are done, leave the window of Machine virtual library empty open.

  6. in the Finder, drag the icons of file virtual machine in their new location and drop them in library of virtual machines VMware Fusion window. Drop them one by one in the original order, you got, or rearrange icons later.

  7. run your virtual machines as before.

  When you create new virtual computers, navigate to the desired file before the Save.

  IMPORTANT NOTE: If you your folder of Machines ~/Documents/Virtual excluded from backups Time Machine, don't forget to change the exclusion to the new folder.

  Time Machine backups are not reliable for virtual machines. You must have another strategy. (I shut the virtual machine down, compress the 'file', and then move the compressed file to a folder that is included in the Time Machine backups. This isn't the only strategy, but it works for me.)

• How to build a new virtual machine based on cluster with powercli?

  When you create a new virtual machine on cluster in the user interface, you cannot select the host, it is decided by the cluster.

  Now, I want to create a new vm on cluster by powerCli. I have not found any parameter to specify the cluster.

  Only the "$vmhost" to specify the host.

  Why are they so different?

  Can someone help me understand it and how to create a new VM on cluster?

  Thank you in advance!

  Hello, bob1118-

  While, as you said, it has non - Cluster parameter to the cmdlet New - VM, you _can_ effectively specify the cluster at new time of creation of VM via PowerCLI: you specify the list of resources within the desired cluster.  So a partial New - VM call would look like:

  New-VM -Name myNewVM0 -ResourcePool (Get-Cluster myDestinationCluster | Get-ResourcePool -Name "Resources") -Template ...
  

  Who uses the resource pool default "Resources" that exists in a cluster.  And, you could fill in the rest of the parameters relevant to the new virtual machine of your desires.  How do I?

• How to create the new virtual machine vm existing in the data store on ESXI

  I have ESXi and couple of virtual machines.

  I have the vsphere client on Windows 7.

  I then deploy the ovf from the vsphere client vm and it began to import my VM 30 GB.

  In the morning, I realized my vm with a vmdk file file has been transferred in the data store

  But I couldn't see any virtual computer.

  Now I don't know how to turn on this vmdk file that is in my data store

  @King_Robert

  It's a very bad habit of yours to just copy and paste content created by someone else, without even mentioning the source (http://www.mustbegeek.com/create-copy-of-existing-virtual-machine-in-esxi-server/)

  André

• How can I register a virtual machine in the command line?

  I want to automate the registration of virtual machines in my VMWare Fusion.

  I have the vmx file. I can do this by using the command line?

  If not, how can I do it automatically?

  Thanks in advance.

  There are two main methods you can interact with the Virtual Machines outside user of VMware Fusion, the VIX API and vmrun interface and with the registration of these two commands are not supported with VMware Fusion (or VMware Workstation.* (* Non-exclussive VM)}.)  Recording controls are used primarily with vSphere.  VMware Server also supported recording orders.

  BTW, from a Machine virtual Finder by double-clicking on the file of configuration of Machine virtual package or .vmx if it is already running and is not created through the interface user of VMware Fusion, for example created in VMware Workstation VM and copied on a Mac, created manually or via a script solution.  Although she will then have to be manually recorded.  Registered/not registered in this context the Virtual Machine appears in the library of virtual machines VMware Fusion.

• How to configure NTP between Virtual Machines without using Vsphere Client

  I have a group of 8 virtual servers of 5.5 ESXi without an Internet connection. There are virtual machines on each of these 8 virtual servers.

  I did one of these 5.5 virtual ESXi host a NTP server by editing the file /etc/ntp.conf with below configuration and

  started the ntpd daemon. He began to take the time to its local clock, here's the output of ntpq Pei

  IP server 10.108.190.14

  ip address of the client 10.108.190.15

  Server /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 127.127.1.0 maxpoll 4

  > > fondant 127.127.1.0 stratum 10

  | ntpq Pei

  |   refid distance st t when poll reach delay offset jitter

  | ==============================================================
  | * LOCAL (0). LIUX. 10 l 2 64 377 0.000 0.000 0.001

  Then I edited the file /etc/ntp.conf on customers with below configuration but the customer would not synchronize with the server. He

  wouldn t get response from the server. Here is the output of ntpq Pei

  Customer /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 10.108.190.14 iburst

  | ntpq Pei

  |      refid distance st t when poll reach delay offset jitter

  | ==================================================================
  | 10.108.190.14 INIT. 16 u

  Now, when I configure NPT Client/Server on virtual machines through the Configuration Option under Option Configuration time

  in Vsphere Client everything works fine and the client and the server to synchronize with each other. I checked the file /etc/ntp.conf on both the client

  and the server and it has a couple of restrict 127.0.0.1 and restrict the lines added by default kod nomodify etc.

  So why NPT Server featured when enabled via Vsphere Client works very well, but it does not work when it is configured manually

  in the virtual servers directly.

  I was connected to a vCenter Server Appliance through the VSphere Client and enabled the synchronization of time of the NPT.

  I really need to know how to configure the NTP server without using the Vsphere Client so that I can automate the

  task by writing a python script that would connect to each virtual server and NTP Client/Server configuration.

  Any help in this issue deeply appreciated!

  Thank you!

  You can configure the ntp server without using viclient.

  Take a look @ http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&languageId=&externalID=1003063

  Hope this helps

  -Assane

• How can I remove a virtual machine from the mycomputer tab entry?

  I imported a virtual machine, and then moved the files and it has opened its new location and now I have two similar entries in the tab "MyComputer".  I'm under VMWorkstation 9.  How can I remove the old entry that opens is more because the files are not there more?

  I've found that a right click works indeed to remove the context menu when you are on the part of the library, but when I was in the My Computer tab, right click does not work.  I had my library closed shutter, but once I opened it and tried, I managed to solve the problem.  Thanks for the help.

• How to add a new virtual machine in VMPlayer inventory?

  People,

  Hello. I'm installing Oracle Database 11 g 2 RAC system using 2 nodes that are 2 Virtual Machines on top 3 VMPlayer.

  Their locations are C:\VM_RAC\rac1 and C:\VM_RAC\rac2.

  The original rac1 VM is created in VMPlayer 3 and works correctly.

  For the second rac2 VM, I simply copy all the files in the folder rac1 in rac2 folder. Then change its display name of "rac1' to 'rac2' in the rac2 configuration file.

  But rac2 in not visible in VMPlayer and cannot be turned on.

  To make rac2 in VMPlayer, we add rac2 in VMPlayer inventory. But I don't understand how to do it.

  Can any folk tell me how to add the new VM rac2 VMPlayer stock, so that it can be powered on?

  In the 'File' menu click 'Open Virtual Machine... "and select the .vmx file in the folder of the virtual machine.

  André