How to set the customer information in OBIEE

Similar Questions

• How to set the custom changes in sets of customized tools when installing deployed on Adobe Acrobat Pro XI?

  I am trying to set settings in the custom tool sets, specifically properties Protection\Redaction - example: enabling change highlight color and text overlay.  Is it possible to change the settings for a deployment?  I am unable to find a way through the Customization Wizard and finds it difficult to find documentation on the deployment of the custom settings for the toolsets.

  Question:

  Customization of the tool sets as part of the deployment of Adobe Acrobat Pro XI

  Environment:

  For deployment, I use the Adobe Customization Wizard and SCCM 2012 to distribute and install Adobe Acrobat Pro XI.

  Environment has Windows 7 and Windows 8.1

  Adobe Acrobat Pro XI

  Thank you

  Mike

  Those who would be the HKCU settings that you "should" be able to implement via the function Panel for the registry of the Adobe XI of the Customization Wizard.

  Look here:

  HKCU\Software\Adobe\Adobe Acrobat\11.0\Annots\cAnnots\cRedact\coutlineColor

  There are names with the prefix "d" alpha as in d1, d2 and d3 with assigned numerical values

  and

  HKCU\Software\Adobe\Adobe Acrobat\11.0\Annots\cAnnots\cRedact\cannotFillColor

  There are names with the prefix "d" alpha as in d1, d2 and d3 with assigned numerical values

• How to set the custom fields in the form submission email?

  Here's what I mean...

  Here is a screenshot of the form online for my client. Most of these fields are "custom".

  

  Here's an email from test of what the email looks like when it come in.

  

  As you can see all my custom fields list as just that, custom.

  When a patient fills this out it is difficult to say what it applies to that.

  How do I change these fields that say "customized" to say what really is the field?

  Hello

  It appears that you have disabled the 'label' for each custom field.

  Please select the field and go voluntarily, as shown in the screenshot.

  

  Please check the 'label' > shoe, this will be you the label to the form field as "Custom", rename it according to your requirement and disable the label again.

  

  Re-upload the site and you should be all set.

  Concerning

  Vivek

• How to set the password on the body of the e-mail in custom e-mail template

  HY,
  I have a model of personalized message in the definition of e-mail > Console Design.
  I send this "Email Template" with the user password, but I do not know how to set the variable "password" in the body of the e-mail.
  I searched Varables > objectives > Variables, but I have not found any variable think as password.
  
  Some have an idea about this? How to set the password on the body of the email?
  
  Kind regards
  PIZA

  You can use a custom Java code. See the following:

  Notification by e-mail to the users after that they change their password from IOM

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the voltage on a 3.3 volt NI 9237 module?

  Hello

  How to set the voltage on a 3.3 volt NI 9237 module?

  The voltage is now at 2.5 volts.

  This is my first time with this camera.

  This set of MAX or are there jumpers?

  I want the value of the excitation voltage at 3.3 Volts and do not change.

  The NI 9237 is a NEITHER cDAQ-9172.

  Thank you

  Bill

  Hi POBA,.

  This can be set to your programming environment.  For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment.  You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.

  "" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...

  "" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...

  "" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...

  In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan

  You can then specify the Source of Exictation to be internal to 3.3V.

  Best,

• How to set the bass and treble on the speakers of Windows XP?

  Original title: Windows XP are involved.

  How to set the bass and treble on the speakers of Windows XP?  Advanced button is not available to use.

  Hi YBatey,

  You can try to install the latest software/driver to be built in the audio part of the motherboard or sound card (if it is used in this computer).

  This can provide the feature you're looking for.

  For more information, please visit this link: How to manage devices in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to set the storage space allocated to the restoration of the system to 200 MB?

  Could you tell me how to set the maximum storage limit to 200 MB?

  Whenever I have delete system restore points, my hard disk free space increases about 10%.  About a week or so later, it's back to where it was before I deleted the restore points.

  It is very important for me because I am sure that storage space is set too high.

  Hello

  See the "BOLD" marked links with more information to help.

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to set the size of the Windows Explorer preview pane so that it will retain the size adjusted?

  All know how to set the size of the Preview windows exployer pane.  I can't remember or 'stick' to the adjusted size.  It always develops a great size, concealing of file information (name, date modified, size, etc...) it's very great pain.

  Help, please!

  Thank you

  * original title - preview pane of Windows Explorer is a pain.*

  Hello

  Try this:

  (a) click the "Hide the preview pane" in the upper right corner (on the left of the help) of Windows Explorer

  (b) to resize the Windows Explorer window for how you want

  (c) click the 'Show preview pane' icon in the upper right corner (on the left of the help) of Windows Explorer

  Navigate to the link below: http://social.technet.microsoft.com/Forums/en/w7itproui/thread/569509ae-a37a-441f-8cc3-95d5231b171b

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to set the key numb to activate at startup

  How to set the key numb to activate at startup on computer laptop gateway running windows 7?

  Original title: numb locking button

  Hello Wan,

  Thanks for the quick response. We appreciate your time and your efforts.

  By default the NUM LOCK status is the same as it was before you shut down the computer properly. If it is on when you shut it down it will be on when you turn on the computer again.

  A few users have solved this problem by disabling fast boot option in the BIOS (Basic Input Output System). I would ask disable youFast Boot to the BIOS and check if that helps.

  For more information about how to disable Fast Boot in the BIOS, I would ask you to contact the manufacturer of the system.

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope the helps of information provided. Let us know the results and do not hesitate to post on the Microsoft Community, in case you have problems when you are working on Windows.

• How to set the SafeSearch settings in the Bing app?

  When you use Bing, how to set the SafeSearch settings?

  SafeSearch settings is accessible through settings App / in Bing SafeSearch.

  SafeSearch (and all the measures taken within SafeSearch) parameters are NOT shared with bing.com experience.   For example, you can have SafeSearch within the app set to OFF, but have the same function moderate to bing.com experience value.  In other words, these settings are not shared across app & bing.com experience.

  For more information on the experience of bing.com, see this article: http://onlinehelp.microsoft.com/en-us/bing/ff808441.aspx