How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

Similar Questions

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the render property of the field on one facet of panelSplitter?

  Hi, experts,
  In jdev 11.1.2.3,.
  How to set the render property of the field on one facet of panelSplitter?
  -If the panelSplitter is reduced then make some fields in the second pane. otherwise, do not make these fields.
  
  It is not an easy job for me to set the EL expression.
  Thank you.

  OK, just did a small test case. It turns out that the difficulty is to automatically update the fields when the separator discloses. To add a pair of earphone client/server. This sends the event to disclose to the bean to update the fields.
  Page code:

  
  
    
    
      
        
          function disclosePanelSplitter( event) {
              var inputComp = event.getSource();
              AdfCustomEvent.queue(inputComp, "myDiscloseEvent",
              {}, true);
          }
        
        
          
            
              
                
              
            
            
              
                
                  
                    
                    
                      
                    
                    
                    
                    
                  
                
                
                  
                    
                    
                      
                        
                        
                        
                        
                        
                      
                    
                    
                    
                    
                  
                
                
              
              
            
          
        
      
    
  
  

  and the corresponding bean to the scope of the request

  package de.hahn.xyzxyz.view.panelsplitter;
  
  import oracle.adf.view.rich.component.rich.layout.RichPanelSplitter;
  import oracle.adf.view.rich.context.AdfFacesContext;
  import oracle.adf.view.rich.render.ClientEvent;
  
  public class PanelSplitterBean {
      private RichPanelSplitter panelSplitter;
  
      public PanelSplitterBean() {
      }
  
      public void setPanelSplitter(RichPanelSplitter panelSplitter) {
          this.panelSplitter = panelSplitter;
      }
  
      public RichPanelSplitter getPanelSplitter() {
          return panelSplitter;
      }
  
      public void doCustomEvent(ClientEvent event)
      {
          AdfFacesContext.getCurrentInstance().addPartialTarget(panelSplitter);
      }
  
  }
  

  Timo

• How to set the HostDiskPartitionAttributes property when creating Vmfs volume

  Hi all

  When creating vmfs datastore through vlume

  programmatically, I need to partition the vmfs volume. here my question

  is an idea how to set the HostDiskPartitionAttributes there is a

  parameter to create vmfs vloume. Here I use Vdisk lun san

  "that will have the size, raid, stripesize... by this I need to set this.

  HostDiskPartitionAttributes ' property.could someone help me please. "

  Note: it's links to the document:

  http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/index.html

  is the method that you need to find CreateVmfsDatastore.

  Thank you

  As partition is a contiguous series of blocks on a disk that is marked to be used and is considered in each sector of 512 bytes. Must divide the space into sectors and specify startSector and endSector according to your requirement, that the way in which large partition you want to create.

• How to set the height width for an Image field in a web App?

  I have a webApp to save the image of user with description, title. But when I display all items pictures are great, I want to know how to set the height and width for images?

  Hello

  To do this properly, you need to resize the image. Prefably before you put it in British Colombia. While you can to scale the image in CSS, you don't want to do. Why? Because the images are still very large and probably not optimized properly for the web.

  This means that the page with these images will take a long time to load for people, and people will not be happy on the display of your site.

  You must use a software such as photoshop, if you or iphoto on a mac for example for editing, crop and size of the images before uploading. If you do everything you can use free web based tools such as this one:
  http://Pixlr.com/editor/

  You can also do in British Colombia itself in the file manager. If you click on the image you can see options to resize. The downside to this is's done it by pure mathematics. He doesn't know what is in the picture and the results can make the image etc. shrivelled.

• How to set the storage space allocated to the restoration of the system to 200 MB?

  Could you tell me how to set the maximum storage limit to 200 MB?

  Whenever I have delete system restore points, my hard disk free space increases about 10%.  About a week or so later, it's back to where it was before I deleted the restore points.

  It is very important for me because I am sure that storage space is set too high.

  Hello

  See the "BOLD" marked links with more information to help.

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• How to set the default print orientation in oracle reports 6i

  Can someone help please how to set the orientation of the printing default reports Oracle 6i? Currently the document is printed in Portrait orientation, but I need to print in landscape orientation. Is this possible?

  It is now resolved. Go to page-> main Section layout model, press F4. In the palette property, select the Orientation that should be selected when printing is taken for this report.

• How to set the height of row?

  How to set the height of row for my text in EA? I checked this article Edge animate help | Adding text to your project (tutorial) , but it refers to an old version of the environmental assessment.

  Hey Bruce,.

  You can set it in the user interface. Activate additional text settings in the property Panel by clicking on the arrow.

  

• How to set the width of layout desktop screen in fluidlayout?

  For the flow layout of RWD, Web site design page I have is 960px wide. While working on DW CC, the width of sizes of support are:

  Mobile: width: 86,45%;

  Shelf width: 90.675%;

  Desktop width: 960px;

  When I set a percentage for desktop (for 960px), 68.6% (which is less mobile and the width of the Tablet), the browser displays more width 960px. Use a screen resolution of 1680X1050px.

  Now how to set the size of layout as 960px for desktop, in percentage?

  
  

  Or should I keep it as 960px for office and percentage for mobile and Tablet?

  68.6% of 1680px equals 1152px, then Yes, he is bigger than 960px

  If you want to stop at the 960px available, then set max-width: 960px to the container as well as width: 68.6%.

• How to set the font size of the title to different screens in fluid layout?

  Build a fluid layout (Responsive Web design), and could I please know how to set the font size of title (h1, h2, h3 etc.) and other mobile police, tab size and wallpapers?

  I use no px values.  I generally use the % font size in the selector body inside my queries.  Adjust the dimensions accordingly.

  / Special rules for mobile phones. */

  @media only screen and (max-width: 481px) {}

  Body {size are: 85 %}}

  }

  / Special rules for tablets * /.

  @media only screen and (min-width: 482px) {}

  Body {make-size: 100% ;}}

  }

  / * Special rules that apply to workstations * /.

  @media only screen and (min-width: 1050px) {}

  Body {make-size: 135% ;}}

  }

  Nancy O.

• How to set the permissions so I can read the documents?

  How to set the permissions so I can read the documents?

  OK, this seems to be something 'Chrome '. Sometimes chromium is, he won't even close Adobe Reader. So it must be fixed with Chrome. Unfortunately, everything I can find on the web suggests that "always run for this site" should work. However, if the page closes, it sounds as if Chrome itself crashes! I suggest you only watch for a forum of Chrome, they can learn more on this subject.

• Hi, how to set the maximum number of connections of FMS on the same IP address

  How to set the maximum number of connections of FMS on the same IP address?

  The application.clients object available in action script server-side maintains a list of all clients connected to the Court at this moment here.

  You can browse the table and compare the property Client.ip to determine the max connections from an ip address and therefore accept/reject connections.

  It can be as simple as this in the application.onConnect

  application.onConnect = function (clientObj)

  {

  var totalConnections = 0;

  for (i = 0; i< application.clients.length;="">

  {

  If (application.clients [i] [ip] is clientObj [ip])

  {

  totalConnections ++;

  }

  }

  If (totalConnections > 10)

  this.rejectConnection (clientObj);

  on the other

  this.acceptConnection (clientObj);

  }

  Above the piece of code is untested so you may have to make some changes to make it work, but your solution should look something like this.

• How to set the value of something in a component of the main application?

  Hello
  
  Maybe I've worked on it too long, but I can't understand how to set the value of the text property of a text entry field in my main application component in a block of mx:Script. I have a component called Login in the components folder, and I need to set the text value of empNum. In my statement of mxml up there, I said these components such as xmlns = "components.*" so, logically, the property, I'm putting a c.Login.empNum.text. I can't understand the correct syntax to make this work, and I've tried everything I can think of. Does anyone have any suggestions? I think this should be easy, and there is just something missing me.
  
  Thank you!
  Holli

  Have you tried to give him an id?

  If later you can make the loginScreen. empNum.text = "my text".

  Laurent,

• How to set the output of the report to the session variable

  Hello
  Is it possible to output report to the session variable value. If my report returns 1 row and 1 column.
  
  I have a dashboard command prompt where I select name, but I want to find the ID of the same name.
  This ID I want to move to a Fx column, to achieve this, I created an interim report and I got the code. Now my problem is how do I put this ID in the session variable.
  
  Please help if anyone knows...

  Have you read this:
  How to set the session / presentation in the repository variable variable

  Dashboard invites on Month Name but the report on the ID of the month filter:
  Re: Guest dashboard on the name of the month but the report on the necessary month ID filter

  If you have dashboard guest (name), then you can have that one report that is filtered by a name but present card to display or not id but use id in the service. Or two reports as in the solution in the second link above and the second report has id in the function and filter by the id of the first report. You need not define this ID in the session for this example variable.

  Please close your previous discussions, if they are treated.

  Concerning
  Goran
  http://108obiee.blogspot.com