How to set the value of the field a comboBox selection

Similar Questions

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• How to set the first character as selections in the EditField.

  Hi friends,

  I am a third-party application that I have to set the first character as capital.

  so please help me how to set the first tank as capital.

  Take a look at AutoTextEditField - maybe you can use this to do it automatically...

• How to set the field date as required field on UI - urgent

  Hello
  
  I got how set the date as field demands presented on the page.
  
  Below is the code I used, but giving it as class cast exception.
  
  
  MO OAMessageTextInputBean = (OAMessageTextInputBean).webBean.findChildRecursive ("dateFiled");
  mb.setRequired ("yes");
  
  Please help on this. for the other beans messagechoice it works fine. but only for the data type DATE gives classcast exception

  Try this

  MO OAMessageDateFieldBean = (OAMessageDateFieldBean) webBean.findChildRecursive ("dateFiled");
  mb.setRequired ("yes");

  Thank you
  Shree

• How to set the width of a select list?

  Hello
  
  an another newbie question me :-)
  
  When I create a list of selection the default width is 30, no matter what I set this value to the width of the selection list remains the same, it is as wide as the widest item in the list. This mess the page design. I f I have three select lists in a column, I want to have the same width. How to accomplish this?
  
  / Magnus

  Change the element and in the form HTML to the elements attributes field type the following:

  style="width:120px";
  

  adjust the 120 to what width you like

  Shunt

• How to set a value in a field with condition in a report?

  Hello
  
  In my report, I want to change a value of a field when it checks certain conditions.
  
  How can I realize this process?
  
  Help.
  
  Regardly.

  Hello

  You can use the internal commands SRW. SET_FIELD_NUM or SRW. SET_FIELD_DATE or SRW. SET_FIELD_CHAR in the trigger of Format:

  Examples can be found here:

  SRW. SET_FIELD_NUM:
  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/PLSQL/builtins/SRW/srw_set_field_num.htm

  SRW. SET_FIELD_DATE:
  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/PLSQL/builtins/SRW/srw_set_field_date.htm

  SRW. SET_FIELD_CHAR:
  http://www.Oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/PLSQL/builtins/SRW/srw_set_field_char.htm

  Concerning

• How to set the width of a Select list in APEX 5.0?

  Hello

  I have been using APEX 4.2 for a couple of years now. I am currently building my first application in APEX (Oracle DB 11g XE) 5.0

  On a page with multiple selection lists, I'm trying to set the width of each of them, so they are all the same size regardless of content.

  APEX 4.2, I used to just add: style = "width: 200px ' to 'ownership of the attributes of element HTML Form.

  How do I in the APEX 5.0? Property of the 'HTML Form Element attributes does not seem to exist anymore. Is there another way?

  Nick

  Hello

  You can use custom attributes: CSS min-width and max-width properties

  

  Concerning

  J

• Documaker: How to set the field of the 2D matrix

  Hello
  
  I created a matrix 2D field, but is not a 2D matrix...
  You may notice that it is false?
  
  Policy ID: Data Matrix for Documaker (dm___.ttf)
  Type: Bar Code
  Length: 32
  Format: Data matrix
  Symbol size: 18 * 18
  Scale: 1
  Rule: XDD
  Source name: xxxxxxx
  
  Example of XML is as follows.
  
  < code >
  < xxxxxx > 12345678901234567890123456789012 < / xxxxxxx >
  < / bar code >
  
  In the test, this field is output as follows...
  
  AIHPBMGKHJENFPFKDK
  AHFMCKOBPOEONLALIK
  ALJLFFJMANLMMJAEBK
  AGFCPMJOBELOEIKFCK
  DDLDDDDDLLLLDLDDDL
  
  I can output the barcode with the "1:1:2:2 Code 39".
  Please help me.
  
  Thank you

  If you are talking about the screen, you also have to install TTF fonts to let Windows know to to use. The location in the fonts directory, would only affect that print them in PDF format when you download fonts.

  Find the. TTF file on disk, right-click on it and choose Install. If you do not see the offer to install in your version of Windows, you may need to go to the control panel and choose fonts. Check the list to see if Data Matrix for Documaker has been installed. If you don't see it in the list, then check the offerred help by Windows, how to install a font on your system.

• How to set the field as password type entry

  Hello
  
  In display determination Oracle Web interview, I want to Setup text entry as type of password is entered text should be displayed in the form of points/stars. Please tell me how can this be achieved?
  
  Thank you
  Sri

  Create a custom control that have a tag html input type is password.

• How to set the slider tool to select the tool when opening acrobat XI 11.0

  I need the tool to default to the Selection tool and NOT the hand tool slider when you open Acrobat XI 11.0

  Hi mkwillden,

  Once you select the "Select" tool any subsequent launches of the software should keep the 'selection' as default tool.

  If this isn't the case, you can specify the parameter registry here:

  HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\Selection

  Change the data of aDefaultSelect to Select or by hand as requires it.

  
  

  Kind regards

  Rave

• How I set the value of a dynamic text field row

  I have a repeated line form that contains a button and several text fields.  There is a text field (input field) above with some information I want to place in the table and several buttons that I want to read the value of and defined on the table.  Excuse me there are several questions I have and I use pseudocode to describe.

  Top shape resembles

  InputField

  | ButtonX1 | ButtonY1 | DescriptionX1 (read the text only field)

  ...

  | ButtonXn | ButtonY1 | DescriptionXn

  OutputRow looks like

  | ButtonOutput | OutputField1 | OutputField2 | OutputField3 |

  So, I want to do

  ButtonX1.click

  {

  OutputTable.OutputRow.addInstance (true) //this works - everything I have questions on

  OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue

  /*

  Question 1

  How should I address the location of each table to set a value

  Question 2

  How can I get the value of the description field in the same row as button and table

  I would like to say something to the effect of the OutputTable.OutputRow [?]. OutputField1.rawValue = this.parent.DescriptionX

  */

  OutputTable.OutputRow.OutputField2 = InputField.rawValue

  /*

  Same question as above - how can I specify a dynamic line - it's the syntax appropriate for obtaining the value of the input field?

  */

  OutputTable.OutputRow.OutputField3 is this. ButtonLabel

  /*

  Question 3

  How can I get the value of the label of the button to set the field

  There should be a lot of these buttons and buttons will be added - I'd rather set the value based on the label of the button to facilitate value - not requiring only not to change the code

  */

  Issue 4--unrelated to those at the top.

  Is it possible to build the first table

  | ButtonX | ButtonY | Description |

  from a XML file.  I've seen examples showing how to build if it's just data, but XML can be pushed into a form with the code to perform the above actions?

  Glad you figured it out... nothing wrong with doing it this way.

  Normally XML contains data and no default legends these xml files are bouond to the rawValue property. You can enable the dynamic linking and other properties of the object will be bindable (they appear as links) in the user interface. If you click on the link to legend an Assistant appears allowing you to bind the node in the XML file.

  Paul

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• How to set the values of dependent choice list fields

  Jin
  
  I create a drop-down list in my page.
  This list of choices has values. (coming from the vo)
  What value I chose from the drop-down list that display certain fields value.
  for this I take the value of the drop-down list and set this values to these fields.
  its working fine.
  
  but my doubt is, at the time of the loading page, these fields (list selection dependent fiedls) defaulitly contains a value
  (this is one of the value of the vo)
  
  But I don't want to see any value at the time of the loading of the page
  Here, contains values null or empty fields at the time of the loading of the page.

  Hello

  Instead of linking these text fields display attributes... create transient attributes in VO and link these transitional
  the attributes of these text fields.

  Now you load the page set the transient attribute ' ' using row.setAttribute("Attribute","");

  In addition, as the Pickist value is changed, and then also, you can set the value as you wish...

  This will allow to permanently solve the issue.

  Thank you
  Gerard

• How to set the alignment of the field in a table in jdev 11.1.2.3?

  Hello
  How to set the alignment of the field in a table in jdev 11.1.2.3?
  for example: to display a body of numbers in a table as right aligned.
  I tried to put field (amount) VO UI Hint Format Type: Number; Format: 0000.00
  and jspx, flowing, but it doesnot work.
  Thank you.
  Bao
  
  < af:column sortProperty = "#{bindings." VO1.hints.amount.name}.
  sortable = "true".
  headerText = "#{bindings." VO1.hints.amount.label}.
  ID = "c44" width = "60".
  Align = "center" >
  < af:inputText value = "#{row.bindings.Amount.inputValue} '"
  label = "#{bindings." VO1.hints.amount.label}.
  required = "#{bindings." VO1.hints.amount.mandatory}.
  columns = "#{bindings." VO1.hints.amount.DisplayWidth}.
  maximumLength = "#{bindings." VO1.hints.amount.precision}.
  shortDesc = "#{bindings." VO1.hints.amount.ToolTip}.
  ID = "it58.
  secret = "false".
  inlineStyle = "" text-decoration: overline; ">"
  < f: validator binding="#{row.bindings.Amount.validator}"/ >
  < / af:inputText >
  < / af:column >

  Hello
  To set a field right alignment in a table:
  It doesnot work when InlineStyle-> text-align: right;
  It works when ContentStyle-> text-align: right;

• How to set the value of something in a component of the main application?

  Hello
  
  Maybe I've worked on it too long, but I can't understand how to set the value of the text property of a text entry field in my main application component in a block of mx:Script. I have a component called Login in the components folder, and I need to set the text value of empNum. In my statement of mxml up there, I said these components such as xmlns = "components.*" so, logically, the property, I'm putting a c.Login.empNum.text. I can't understand the correct syntax to make this work, and I've tried everything I can think of. Does anyone have any suggestions? I think this should be easy, and there is just something missing me.
  
  Thank you!
  Holli

  Have you tried to give him an id?

  If later you can make the loginScreen. empNum.text = "my text".

  Laurent,