How to set up email notification alerts in the console BTM
HelloI want to know can we send notification of Oracle Business Transaction Management? If Yes, how can I send notification to the administrator say admin @ < host_name > BTM .com on all alerts (alert of ALS or condition) I configured email server host name and the address of the sender in the console BTM but how can I set up email notification on alerts from the console BTM?
Thanks in advance!
Here you asked for him... it's... (Someday I'll make you open a SR!)
This aspect of the product is not documented. The important thing to note is the following:
There are two main sections of the documentation:
Metadata for SLA alerts
The following table specifies the metadata for the SLA alerts.
And:
Metadata for Condition Alerts
The following table specifies the metadata for condition alerts.
If you want to subscribe to an alert of SLA, then you use the elements that are described in the "Metadata for SLA alerts" section. This means that you must use:
And you can't use
So, what do you use? You must add this item to your subscription:
You must fill in the
A full subscription will look something like this:
I hope this helps. Ken
<>
enabled = "true" name = "SLA_on_Xact".
userID = "admin".
xmlns:AP = "http://namespace.amberpoint.com/amf".
xmlns:SOAP = "http://schemas.xmlsoap.org/soap/envelope/".
xmlns:TNS = "urn:com. AmberPoint.notifier.Server.Configuration ".
container = "http://www.w3.org/1999/XMLSchema" xmlns: xsi = "http://www.w3.org/1999/XMLSchema-instance" >
Tags: Enterprise Manager
Similar Questions
-
How to set up email notification
How to set up email notification?Refer to the doc below
http://www.Oracle.com/technology/products/OEM/PDF/BestPractices-notifications.PDF
-
How to set up email on printer c7280
How to set up email on printer c7280
c7280 has email capabilities
-
Hello
I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.
I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:
"The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »
Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
How can I keep email to open in the display pane when I click on it in the Inbox?
Turn off the preview pane. (View |) Page layout).
-
How to set text in an object, so the object expands with the text and has even space on both sides of the object in illustrator cc?
R,
You can do this:
(1) create the initial direct Type;
(2) in the appearance palette dialog, click on add a new fill and define the color as you wish;
(3) effect > convert to shape > Rectangle corners round/Rectangle/Ellipse and set parent > width/extra height as you wish (essentially what needs to be added to the size of the bounding box, if anything).
After that you can change the Type and the filled area will fit as shown on the picture.
-
How to set up email for provider VDC alerts
Hi any advise how to set up alerts for vdc provider as low on storage etc. on VCD?
Thanks for any info
Emails are sent when a data store changes from green to yellow, yellow to red.
To change WHEN these data storages are at these levels, you can get the properties on a data store. These are set by the GB left on the data store.
System-> monitor-> data warehouses and handle-> RightClick:Properties
* Yellow disk space threshold:
* Red disk space threshold:
I hope this helps.
-
I'm willing to click a column like 'From' and then click on a letter, for example "S" to not see emails which the name starts with the letter 's'. You can do this in Outlook, and I was wondering if possible in Thunderbird? Then only a short e-mail list will appear of all the people starting with the letter I hit to filter and sort further.
I have the correct settings, but it did not work. I type 's' and I get a long list of emails and no not the one where the sender has a name starting with a S.
Please notify.
-
How to get different email addresses all in the same folder
I keep asking, but he answered before and my Inbox (I guess as local folders) used to accept emails from my two different accounts. Now, they come in two different boxes which is annoying. How do I get emails from my two email addresses to arrive in the same Inbox, have the same sent box, etc.. ?
I assume you mean the e-mail pop accounts
Only POP email accounts can use a global Inbox.Quit Thunderbird to access the server mode "offline."
Click the blue screen two located lower left status bar.
It will be two black screen offline icon.All files out of all email pop email accounts and put them in folders in the "local folders".
Delete the emails you want.
Empty Junk and deleted mail folders (for example: right click on the junk mail folder - chute)
Right-click on each folder and select 'Compact' or ' file > Compact foldersWhen pop email account files are completely empty and compact
"Tools" > "Account settings" > "Server settings" for the pop email account
Click on the button "Advanced".
Select: "Inbox for the account of different" and "global Inbox (local folders).
Click on 'OK '.Now, you must check all of the following points to ensure they point to the correct location. Choose so 'Copies and files '.
"Tools" > "Account settings" > "Copies & folders" for pop e-mail account
Look at the records of destination for 'Envoy', 'Projects' and 'Templates '.
Make sure that the messages of each will be stored in your "Local folders" folder locationsthen check Junk - click on "Parameters of Junk" check that the folder selected for junk e-mail messages is the one you want to use in the "local folders".
Do the same for other POP email accounts
Click OK to save the changes to account settings.
Do not go back online - you don't need to download anything.
Restart Thunderbird immediately.When it restarts, it should restart in mode online or maybe ask you.
If you restart offline, it is not important, just trade back after reboot:
Click on the screen icon black two located lower left status bar.
It will be two icon blue screen when it is online.This should remove the e-mail account in the left pane of the folder and redirect the mail on behalf of local folders.
-
HP LaserJet Pro P1606dn: How to set up a static ip on the HP LaserJet Pro P1606dn
How to set static IP on the printer.
Unfortunatle I can't access the web page of the printer with DHCP.
Are there any options to achieve this without page EWS?
I can open the EWS page if I connect the printer via USB to give it a static IP address?
Welcome @munish259272,
Thanks to their participation in Forums of HP! I see by your post that you want to configure a static IP address for the printer. I can help you.
You will need to access the server the printer embedded Web via IP address of the network printer.
I have provided a document to configure the static IP address, go to Solution 4: assign your printer an IP under Windows: does not maintain connection printer wireless. Do not take into account the title.
Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you! -
How to set a user account to have the same settings as the administrator account
How to configure a user account to have the same settings as the administrator account. using windows xp pro with service pack 3
Set the "parameters of same.
If you want that the user has administrator privileges, then all you need to do is to add the user to the group "Administrators". To do this, right-click on 'My computer', select 'Manage' and open the "local users and groups" section. Click on 'Groups', double click on "Administrators" and add the user to the administrator group.
If you set 'settings' and things like wallpaper and other preferences, there isn't a way to do that easily other than to simply set these parameters.
Hope this helps,
JW -
How to clear the log messages alerts in the console em12c
After installing em12cr3, I check the log of alerts via console em12c.
so I want to erase that checked the messages, but I don't know how to do it.
Please let me know
Thanks in advance.
Hi team,
From the Console, you can try the following
Connect to the Console
Under the Enterprise-> Monitoring-> click the Incident Manager to go to the Incident Manager UI menu item and then click on the link ' open issues ' on the left
Identify problems specific to your target.
Click the problem link to view details
On the right side, you should be able to solve the problem which will clear all Incidents related to the problem.
or
Go to the homepage of the target
Click the menu level target and go to monitoring-> Incident Manager => click on all problems open on the left and identify problem here - click on the problem link to show details--> you should again see the clear option to clear the incident here
Also you can check below metalink doc to understand what the Cloud Control measures can be erased manually if necessary
REF
What are the Statefull and stateless Metrics in Enterprise Manager - explanation and example (Doc ID 733784.1)
Kind regards
Rahul -
How to set programmatically different view settings in the same workflow
Hi all
I have a business view that calls another view activity B with a link. In this connection, the action takes place to a method (I use the class JSFUtils: http://jdeveloper-adf.googlecode.com/svn/trunk/TGPrototype2/ViewController/src/com/tgslc/defaultManagement/utils/JSFUtils.java):
public String goToB() {}
String paramToPass = "someParameterTakenInSomeWay";
JSFUtils.setExpressionValue("#{pathToViewB_pageBPageDef.paramName}",paramToPass);
Return "openActivityB";
}
where openActivityB is the case of control flow to call B.
In the file for pageDef B, I put a parameter "paramName" worthless:
<? XML version = "1.0" encoding = "UTF-8"? >
< pageDefinition xmlns = "http://xmlns.oracle.com/adfm/uimodel."
version = "11.1.1.59.23" id = "pageBPageDef" >
< Parameters >
< parameter id = "paramName".
value = "" / >
< / Parameter >
< executables / >
< bindings / >
< / pageDefinition >
But at the time of operation, I have an oracle.jbo.expr.JIEvalException:
Houston-25077: paramName not found in the object name specified: pathToViewB_pageBPageDef.
The question is: How can I set the parameter view activity programmatically?
Note that I use this method to set the parameter because in the real application, I have many 'view activity' that will call B, but all these should adjust this setting.
I use JDeveloper 11.1.1.4.
Thanks in advance,
BaudelHello
This is because PageDef B represents a link container that is not active at the same time you try to call it. The link container becomes available when you navigate to the page, but not before. Instead:
1. define a bean managed pageFlowScope and expose a Set/getter accessor method to contain the value to pass
2. the bean managed pageFlowScope property reference of NDValue attributebinding using EL
3 set the managed bean before you navigate to view BFrank
-
Apex - how to set hide and show checkboxes at the event button
Hello
How to set up HIDE/SHOW check boxes when click on the events button. (apex)
If I press the button and then the box will appear.
If I press it again then check box will be disapper.
Can u please help me solve this issues in the APEX.
Thanks in advance.
concerning
rMy steps:
1 create the point of the box
LOV:select 'orange' d, 'orange' r from dual union all select 'apple' d, 'apple' r from dual union all select 'banana' d, 'banana' r from dual
2. create the region button. Specify the redirect URL and URL target as #.
3. create a dynamic action
Advanced
Event: Right click; Selection type: jQuery Selector; Select jQuery: button [value = "Toggle"]<-- where="" toggle="" is="" the="" label="" of="" my="">-->
Action: Run the JavaScript Code. Fire when the Page loads: uncheck the box. Code:var ele = $('#P34_FRUIT'); if (ele.css('display') == 'none'){ $x_Show(ele); } else { $x_Hide(ele); }
Leave the rest and click on create
Click the button to see it disappear and other things (not tested in IE).
I did sample: http://apex.oracle.com/pls/apex/f?p=23834:34
-
How to set up default InDesign CS5 in the system with InDesign CS4 has the default value?
How to set the application default .indd InDesign CS5 when you installed CS5 and InDesign CS4 and InDesign CS4 is the current default (InDesign CS4 has been installed after the installation of CS5)
Thanks, but I already tried at first, but is not effective.
I think that its because of this reason:
The two - InDesign CS4 and InDesign CS5 have their application/program/exe named "indesign.exe".Installation of either InDesign CS4 or InDesign CS5, sets a default for the 'indesign.exe' Windows path. In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which has been staged "Indesign.exe" of InDesign CS5 has been replaced by "Indesign.exe" of InDesign CS4.
But after long google and searching through regedit, I have the solution:
- Search for HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
- Change the value of the attribute (default) for "C:\Program Files (x 86) \Adobe\Adobe" '%1' / / including the quotes
Post edited by: Vidit Kothari
Maybe you are looking for
-
Hello I would like to retrieve information about the last use (date and time) of a user, but I don't know how. In my program, the user enters the name of the person they are looking for. The person sought may be used multiple times in a day, or even
-
How to re - activate the built-in microphone idt?
Hello I have a HP Pavilion dv6 series laptop Win7 32 I tried to cut my built-in microphone so selected idt it and selected disable - now it seems to have disappeared from the system, and I can't find it. not in the hardware devices (not that I can fi
-
Hello After I format a computer and try to get the updated windows, it gives 0x8024D001 error code I tried all discussions about windows update errors, but there is still no result. I am also attaching the image. Help, please. Thank you.
-
An alarm on my PC shuts down at 6:00 every day, what is it?
An alarm goes off at 6:00 every morning on my PC. How can I disable it? It makes me crazy!
-
Google Calendar sync is lasting hours
I wanted to get some comments from other users, because I'm a little worried. Like many of those who have reported this on this forum, I found the transfer of Palm Desktop to forward using the data transfer Assistant to give poor results. So I manu