How to start Mac on external aid on wins 10

Similar Questions

• Satellite A300-19 q - how to start with an external USB drive

  Hi all!

  I have a (old) TOSHIBA Satellite A300-19 q bought in 2008. I wanted to do a clean install of Windows 7 by reformatting my HD. The problem is that my internal DVD drive no longer works. So I tried to boot from the Windows 7 DVD installation with an external USB drive.
  Unfortunately, I couldn't find a way to boot from USB devices in my BIOS options.
  My BIOS is up to date (version 4.20) from Toshiba Web site.

  So I was wondering, does anyone know if the A300-19 q can boot from USB devices?

  Thank you in advance.

  I have A300 at home but I never tried to start with an external USB device.
  Start your laptop and press F12 to get into the boot menu. There must be USB option. What happen when you try to use it?

• How to start in my external hard drive to Windows 7 on my iMac?

  Hello

  I new here and just want to start in Windows 7 with boot camp on my iMac running Mountain Lion.

  I was told this software can do, but I am confused how.

  My drive hard win7 is currently connected to my iMac via a usb adapter. How to start up in it?

  Thank you.

  There are additional manual changes must be made to the .vmx config file to allow the Virtual Machine to be suspended not and do not taken Snapshots in order to have it comply with the same conditions imposed on a partition boot Camp install Windows when it is running as a Virtual Machine.

  This was repeated several times in this forum by myself and others so you should be able to search and find details of I synopsized here.

  I had a quick glance, but you would be kind enough to post a link to this part.

  Take a look at: changing the file .vmx for your VM from VMware Fusion (1014782)

  To keep the Virtual Machine of suspension, you do not want to do when you use a physical disk, add the following option in the .vmx config file.

  suspended. Disabled = "TRUE".

  To avoid having the pictures taken using the following option syntax:

  ide0:0. DeviceType = "rawDisk.

  Note that if the physical disks hard was created as a (free) SCSI vs IDE, then ide0:0 would be scsi0:0.  Note that this option can be added automatically when adding a hard pointing to a raw disk, do not remember for sure and no were not I can test at then time, so the option may already be present but if not then add.

• How formatting a Mac OS external drive in windows 7

  Hi guys

  Got an external drive that is mac OS. Disk management sees in car with no details. All options, including the "Format", is grayed out except to 'Delete Volume '. Question: How can I format this drive in windows 7 Home premium. No access to a mac, PC, to get in shape first.

  If the TrekDozer solution does not work, you can try the diskpart.exe command-line utility.

  • In a command line window, type diskpart
  • List type
  • Find the desired disc, and then type select disk 0 (or whatever number it is, but make sure that you get it right!)
  • Format type

  At this point, you can create a partition with diskpart, or use the disk management GUI.
  
  

• I don't have a MAC no external CD and I bought Lightroom 5 some time ago, how can I download Lightroom 5 and enter my serial number, I always see 6 of Lightroom, but not version 5?

  I don't have a MAC no external CD and I bought Lightroom 5 some time ago, how can I download Lightroom 5 and enter my serial number, I always see 6 of Lightroom, but not version 5?

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• How to start the external ODD product recovery disc?

  Hello

  I use laptop Equium. My builtin DVD drive is faulty. So I connected an external hard drive and tried to make the recovery of product by pressing F12 at startup and select the CD/DVD option. But the system boots from the CD.

  Please help me, what I supposed to do to perform a recovery of product with my external DVD player?

  Thank you

  Biju

  Hello

  I agree with the user above. You can start from an external hard drive t and if you need to replace the internal.

  By the way: If your laptop is under warranty you can get a new drive for free. If this isn't the case, new readers are not so expensive. Just ask your computer store preferred a good offer! :)

• How to start an iMac that keeps locking down to halfway through to start?

  How to start an iMac that keeps locking down to halfway through to start?

  What is your most former showing Mac in your profile? Or a new brand?

  Head to your nearest Genius Bar are a great way to solve these questions - I suggest you make an appointment. the diagnosis is free. If this is a new Mac, take advantage of your guarantee and contact Apple technical support.

• The mac USB external hard drive is compatible?

  is mac drive external hard usb compatible, if yes, how can I reformat it to make it work.

  Hello

  Well, you can use the disk external HARD on MAC, but MAC OS can read the NTFS, format etc.
  If you want to read and write on this HARD drive you must format format HFS or HFS + MAC compatible.
  But on this path you will erase all the files.

  In this case I recommend you copy all the files from the disk on Mac. Then format the HARD drive external and finally backup Mac files on the external HARD disk

• computer a824n of office doesn't start with an external hard drive 2T connected.

  My HP Pavilion a824n desktop computer won't start with my new external hard drive 2T connected via a USB port.  The computer stops on the first screen, which I think is the Intel screen, with options for press ESC, F1, F10.  But these keys do nothing.  The only way out is to press the power button until the computer turns off.

  If I disconnect the external drive before turning the power on, the computer starts normally, the internal hard drive.  After that, I can connect from the outside and it works correctly, so I don't think that there is a defect in it.

  I can get into the screen of the BIOS settings to start with the external drive disconnected and by pressing the F8 key.  But the BIOS shows adequate priority, with the hard drive screen internal first, second DVD, third CD.  The internal hard drive is correctly identified by the model number and the new external drive is not at all (because I started without the connected external.)

  My guess is that when I start with connected externally, BIOS thinks it's the hard drive, it is supposed to boot from.  How can I get the machine to boot from the internal drive?

  Your guess is correct. The hard part is that I'm not sure of an exact solution I've seen this be something difficult to solve.

  Have you tried to update the firmware of an external drive?

  Have you updated your PC BIOS? If you are still running XP, I think that it is the update to the BIOS of your PC:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=PV-40501-1&CC=US&DLC=en&LC=en&os=228&Product=445596&sw_lang=

• Drive mapping: How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.

  How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.  I tried to unplug and power, reboot etc.  There is no F: drive connected to the computer.

  Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths."  It should show the letter currently assigned (G I guess).  Click the button change.  To the right will be a drop of drive letters box.  Go ahead and select F and click on OK.  That should do it. If F is not available, then it is used by the system for something else.  Check disk management to see if you can find it.  If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.

  I hope this helps.  If this isn't the case, after return and we will try to understand what is using F or why it is not available.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How use/start this script?

  Hello

  Maybe a stupid question:

  I ve got the following from Hal Rottenberg script. It named s detailed - VMReport.ps1. I Don t know how to start it :-)

  Begin {}
  # For custom objects propertynames collection
  $PropertyCol = @)
  'Name', 'IP address', 'OS',' home', 'CPU (number)", '(MB) of memory', 'Drive (Count) hard',"HD capacity (Total KB)","Floppy drive (County)","CD player (number)","NIC (number)', 'NIC1 MAC address', 'NIC1 Net name.
  )
  }
  {In process
  If ($_ - isnot [VMWare.VimAutomation.Client20.VirtualMachineImpl]) {continue}
  $Process = "" | Select-Object - property $PropertyCol
  $Process.Name = $_. Name
  $Process. "" IP address "= $_. Guest.IPAddress [0]
  $Process.OS = $_. Guest.OSFullname
  $Process.Host = $_. $host.name
  $Process. "" CPU (County) ' = $_. NumCpu
  $Process. "" memory (MB) ' = $_. MemoryMB
  $Process. "' Hard drive (County) ' = $_. HardDisks.Length
  $process. "" Capacity HD (Total KB) "= '($_.) Hard drives | Measure-Object-CapacityKB of the sum). Sum '
  $process. "" Floppy drive (County) ' = $_. FloppyDrives.Length
  $process. "" CD drive (County) ' = $_. CDDrives.Length
  $process. "" NIC (County) ' = $_.NetworkAdapters.Length
  $process. "' NIC1 MAC Address" = $_.NetworkAdapters [0]. MacAdress
  $process. "' NIC1 Net Name ' = $_.NetworkAdapters [0]. NetworkName
  Write-Output $process
  }

  Any idea?

  THX

  Chakoe

  I get the same error when I type the name of the script file.

  You can try typing the name and then hit .

  Completion of the order should provide the full name, if the file is located in the folder where you are.

• I just downloaded CS6 and don't know how to start... Please notify

  I just downloaded CS6 and don't know how to start... Please notify

  After uploading do you have installed?

  If you are on Windows, run the .exe file to install and if on a MAC, run the .dmg file to install the program.

  If you have already installed, then on Windows click on the "Start" button > select "All programs", then select the application you want to launch from the CS6 Suite.

  If on a MAC, the program is listed under "Applications".

• How to start once installed photoshop

  I installed Photoshopt CS6 and don't know how to start the program?

  Hello

  You can simply launch the startup application (Windows) > all programs > Photoshop / (MAC) > Finder > Application > Photoshop and get started.

  In case you want to learn more about the product, go to: http://tv.adobe.com/show/learn-photoshop-cs6/

  Photoshop help / help and tutorials: http://helpx.adobe.com/photoshop/topics.html

  Kind regards

  Ravi.

• CF8 dev edition - how to start / stop the server?

  Mac osx - CF8 dev edition - how to start / stop the server?
  
  I would turn off auto CF8 start at startup and I can manually start and stop the server...
  
  Q: How do I configure this?

  > Now, I'm also interested to extinguish CF8.01 "auto start on startup.
  > (currently set to that now)
  >
  > Q: How can I turn off that autostart?
  >
  > Hi folks - I'm always interested in the CF on MAC OS x 10.5 server configuration to
  > * NOT * Auto Start - how can I turn off that autostart?

  I googled "cf8 osx doesn't autostart" and turned to the top this:
  http://www.Feed-Squirrel.com/index.cfm?evt=viewItem&ID=96307

  Who is? That's all a little Greek to me because I have not used a
  Mac for...

  Crikey...

  TWENTY YEARS.

  --
  Adam
  (suddenly feel old enough)

• How to start a community Homekit (home app)?

  Homekit needs love. How to start a community of support for her?

  Excellent idea. I forwarded your suggestion to the moderators of Apple. Be aware, it takes time to get the results.