How to start the camera in a DPS page

Similar Questions

• After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera.

  Original title: webcam

  On my laptop hp15r, it is built in hp truevision hd webcam. After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera. Can someone help me with this problem?

  I have a laptop HP Windows 7.

  Type truevision or webcam or similar in the top of the start menu search box > right-click on the result, then select > open file location.

  My webcam can be found > lecteurC > Program Files (86) > Cyberlink > YouCam

  If I type YouCam in the search box, click with the right button on Cyberlink YouCam, it takes me to YouCam.exe.  You can do a right click on the .exe file and choose desktop (shortcut) so that you can access it from there. Once the shortcut on the desktop you can right click it and choose the PIN to the start menu or PIN to the taskbar tasks.

• How to use the camera application

  original title: using the camera application

  According to me, that there is a photo on Metro Screen App.  Is there a documentation or a tutorial on how to use it and what it is for?

  When I click it, I see three small icons in the bottom right...  Camera, Timer and video options.  I don't know what to do with them.

  I see me, looking me in the opposite direction, that seems odd.  I found a folder in my pictures, to my surprise, with pictures of me and two videos! I think that pictures should occur when I click on the screen, but I have no idea how I created a video or how to do it again.

  This looks like a fun app but I need help to use.  I couldn't find anything in the help files.

  Any help would be greatly appreciated.

  MaryLou

  Note: I probably don't not select the category of app so if not, please move this where it needs to go.

  Dena, regardless on the computer because it is an external Kodak camera.  I know how to use the camera itself, but the camera application that appears on the screen of metro is NOT just easy to use.  It shows 3 small icons, one is a timer, the other is for the videos and I forgot what the other one was for.

  In any case, I finally thought to it.  To use the camera, you click on it, then you must click on the screen to start the camera going.   I'm not sure that the timer is for, but again, once you click on the timer icon, you click on the screen to start the timer.

  My camera screen is not screen mode have won 8 metro.  The camera works fine via desktop applications.  I have it working in the version of Win 8 of Skype as well.

  I like to win 8 but it is so lacking in the documentation that it is difficult to learn to use the new ways of doing.

  Thanks for the reply but as I said... has been resolved.

• I can't understand how to start the calendar after the migration.

  I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.

  I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor.

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• How to disable the camera led on my Satellite R830?

  Hi all

  Can someone please explain to me how to disable the camera led on a laptop Toshiba Satellite R830?
  Thank you for your help.

  AFAIK camera LED cannot be turned off. Web camera by activating the LED is always on.

• Re: Could not start the camera on Satellite P300

  I have a Satellite P300 and I use Windows Vista. In recent weeks one have a problem starting the camera. I always get the message

  CEC_Main.exe does not work

  I need help.

  Thank you

  Have you tried to reinstall the webcam software?
  Latest version, you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp-

• Satellite A200-AH7 - how to get the camera program?

  I installed Windows 7 today and now the Chicony Webcam does not work. I've updated the drivers and the software for the Toshiba for Windows 7 download site, but nothing happens when I click on camera assistant. I tried to run the compatibility program, and he tells me that the program is not compatible even tought that the software is for Windows 7.

  Any ideas on how to get the camera to run program?

  Thank you
  Gary

  Sorry my mistake, the camera assistant was hidden.
  Of work.

  Post edited by: gary blainville

  > Sorry my mistake, the camera assistant was hidden.
  > Work.
  This means that your webcam working properly now?

  If so it of great and thanks for your comments! :)

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• How to start the assessment without a device

  Hello

  I downloaded the evaluation version.

  How to start the assessment without a device?

  Thank you

  DV63

  Hi DV63,

  Welcome to the Forums EITHER!

  If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• BlackBerry classic classic blackBerry impossible to start the camera

  Hello. My camera was working fine but all of a sudden when I try to use it it says could not start the camera. The flashlight is not working either.

  1. reboot or restart classic.

  Try them both:

  Restart: with the phone smart BlackBerry power on, press on and press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
  or
  Reboot: with the BlackBerry device turned on, using the keys of volume of the edge side, press and hold both the Up and volume keys for about 20 seconds, ignoring the original message of screenshot... the screen go black, reboot.

  2 the camera and a flashlight are still not working, download it from BlackBerry World app BlackBerry virtual Expert and follow the instructions to run the test of the camera and a flashlight.

  Virtual expert from blackBerry - BlackBerry World

• I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

  I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

  Hello
   
   
  could a. you give us the exact error that you are experiencing?
  (b) also mention the error code, as well if it is listed.
  have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
   
  
  Let us check if the service is set to automatic.
  1. Click Start-> run and type services.msc
  2. now, locate the service named Windows Defender,
  3. double click to bring up the Properties window.
  4. set the startup type to automatic
  5. click on apply, and then click Start
  6. click OK, and then click Close window Services/Local
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to exit the camera application properly

  I start the camera application by doing this

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  The camera app starts. I take a picture.

  I am on a 9000 "BOLD".

  You use the camera you will find that you can not close the app until you get rid of the image sets that you have just taken.

  For example
  take photo

  Picture is a static view of the screen

  If you press close (close menu) it does ' t go away.

  If you press the ESC key, then press close he disappears.

  now in my application, I need to simulate this but I can't seem to get out

  I want to launch the application.

  Press the trackball to take the picture

  Save the photo.

  Then exit.

  I inject

  EventInjector.invokeEvent (new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_DOWN, Characters.ESCAPE, 10));

  EventInjector.invokeEvent (new EventInjector.KeyEvent (EventInjector.KeyEvent.KEY_UP, Characters.ESCAPE, 30));

  And it closes ok

  BUT... when I opened the camera (for the second time) the image is on the screen, the last shot.

  So, it didn't really come out. The user must press the ESC key stupid and then take another picture.

  Any ideas?

  Thank you

  You test this in the simulator of BlackBerry or on a real BlackBerry "BOLD"?  What version of BlackBerry device software you are using (beneath Options, about)?  Is that you inject events for all the actions in your list or just the ESC key to exit?

• How to access the camera in the Blackberry Playbook using Adobe Air SDK (in Flash builder Burrito)

  Hi all

  How to access the camera in the Blackberry Playbook using Adobe Air SDK (in Flash builder Burrito).

  Provide me with examples of coding please.

  Thanks in advance.

  With respect,

  Sampath

  Not possible yet. See http://docs.blackberry.com/en/developers/deliverables/21880/Known_issues_1360895_11.jsp