How to start the windows Task Scheduler service
Hello
I created a Windows Service using c#, I want the schedule to run every night at midnight.
How can I call this windows Task Scheduler service?
Thank you
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the Visual c# MSDN forum.
Visual c# General: http://social.msdn.Microsoft.com/forums/en-us/csharpgeneral/threads
Kind regards.
Tags: Windows
Similar Questions
-
Can I run a service at regular intervals with the Windows Task Scheduler?
Hai...
I want to run a service on a regular basis. I was thinking about tasks windows schedular system. I want to know if it is possible to define the intervals of time explicitly windows Task Scheduler. I also want to know if we can choose a custom event if selected the option "when an event is logged. Your help will be very appreciated. Thanks in advance
Hi SreedeviB,
You can run a service at regular intervals with the Windows Task Scheduler.
For more information, you can consult the following articles:
Automate tasks with Task Scheduler
Hope this information is useful.
-
Could not start the Windows Security Center service.
Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!
the error code says...
one or more ActiveX controls could not be displayed because that is:
1. your current prohibiti of security settings on this page activex controls running or,
2. you have blocked an editor of one of the controls.
Hello
· Since when are you facing this problem?
· Remember to make changes to the system?
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
I suggest you follow the steps mentioned below.
a. click on Start menu and type regedit.exe in the start search box and press ENTER.
b. navigate to the following location. You must remove 1 (parasite) of additional area
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
with number Pseudo-graphique, you will see before the number of zone 0.c. check to see if the problem is resolved;
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Task Scheduler service is automatically get disabled
Could someone can let us know the resolution of this issue that windows Task Scheduler service is automatically disabled minimum once a day, OS is 2003. Thanks for posting so any resolution. Thanks, Chavigny.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server.You can follow the link for your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
I'm trying to defragment my system (Windows 7). When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work. "Start the Task Scheduler Service and try again. When I do, the following message appears: "the remote computer is not found. Please tell us what to do next. Thank you.
Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?
Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.
-
original title: Error Code 0 x 80070424 on the Windows Firewall settings
I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"
Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?
Hello
Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)
This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)
Download the two files from the registry
http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg
The base filtering engine
http://download.bleepingcomputer.com/win-services/7/BFE.reg
Run them and click YES when you receive a UAC prompt
Restart your PC
Press Windows key + R and type
regedit , and then click ok
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE
Right click on it -permissions
Click ADD and type
Everyone, and then click ok
Now click on all
Below, you have the permission for users
Select full control, and then click ok
Press Windows key + R and type
services.msc , and then click ok
Start the service database and then filtering engine service windows firewall
If you still get this error
Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.
Download and launch this key
Click YES when you receive a UAC prompt
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess
Right-click on -permissions
Click Add and type
Select full control and everyone
You should be able to start right now the firewall
You can also Miss defender of windows security center, BITS and windows update services
Download
Security Center service
http://download.bleepingcomputer.com/win-services/7/wscsvc.reg
Windows Defender
http://download.bleepingcomputer.com/win-services/7/WinDefend.reg
BITS
http://download.bleepingcomputer.com/win-services/7/bits.reg
Windows Update
http://download.bleepingcomputer.com/win-services/7/wuauserv.reg
Run them and click YES when you receive a quick restart, UAC the PC
Good luck
* Edit *.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk... -
Windows cannot start the windows Vista Firewall service
My system is windows vista. When I tried to 'turn on the windows firewall' the message I got was ' Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the windows firewall service? "I clicked Yes and another message came:" Windows is unable to start the service windows firewall. " Then I went "firewall" on the Start button and click on "Windows Firewall with advanced security on local computer" and a message with the error code: 0x6D9 came. Can I get the solution to this problem of anyone in this forum. I will be grateful.
Thank you
Hello
You are running a third part of the internet security solution? Many of them include a firewall that is clean and disable the Windows Firewall. If this is the case, you should first disable this one before the attempt to initialize the Windows Firewall. It is not advisable to attempt to run two firewalls at the same time.
If you have recently deleted (uninstalled) a third party solution, you may need to run a cleanup this provider of software tool to remove any debris WASTE of this program in order to activate the Windows Firewall.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
How to start the Windows Security Center?
Original title: ask questions on my lap top trobleshooting
01:00 ariffin... Use window 7 Professional (how I can't start the window Security Center)
This might help you:
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/2d16d7dd-b805-4014-8a20-a23926816997
http://BBS.blackviper.com/index.php?topic=2011.0 -
How to start the Windows Update service?
I followed the instructions but I can't find Windows Update in the list of programs services.msc. How can I get?
What are the instructions?
If you are looking for "Windows Update", you are at the wrong end of the alphabet. Search for "Automatic updates."
-
How to use Windows media player with the windows Task Scheduler (7)?
Original title: why it is so difficult... question of windows media player 12
You want to use Windows media player with windows (7) Task Scheduler. We have a pc, everything that appears on the screen is also pumped to our community cable channel, normally a slideshow in loop is the show, however, sometimes via a scheduler interrupt the slideshow to play a video (say a video of our last Board of Directors meeting) and to make videos, ideally the slideshow returns.
Using Microsoft software, in this case, Windows Media Player v12.0.7601.18150, Task Scheduler 1.0, two things must happen.
1 Task Scheduler launch a video in fullscreen / top of window.
2. when the video is finished, wmp is closed.
Well, 1 works fine. The Task Manager launching wmp in full screen. And a framework of wmp switches to allow a session of wmp be on top.
However, a short time after launch wmp cut the screen down to a smaller version.
And 2. closure of WMP fails to occur. He remains on the screen waiting for human input.
Any input appreciated.
Charlie
For "cuts WMP down to a smaller version", right click on the video game (during playback) and deselect ' auto Player size to contain video.
For number 2, define your point of Task Scheduler task for the "end of task after X minutes" and therefore the value of X. Then it will kill the instance of running Media Player after a large number of minutes. So, it will absolutely immediately when the video is done playing, but it will be within 60 seconds and will be at least to remove WMP and let your slideshow be visible again.
-
Failed to check for an update. -Failed to start the windows Security Center service
Well, as I want to check for windows update, it says that "Windows update cannot currently check for updates, because the service is not runing.» You may have to restart your computer. I alrdy restart my laptop several times that the answer is always the same. I think that this problem related to my service center of windows security. for some reason I can't why it may not be on. can someone help with the solution m.e? Thank you
azbondz,
In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.
Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to locate the window Task Manager
I have a problem to locate my Task Manager window on my window XP desktop. pls help. Thank you.
Hi Goh Ban Hing
You can open the Task Manager by pressing Ctrl + Alt + Delete or right-click on the taskbar, which is usually at the bottom with the Start button, and click Task Manager
http://vlaurie.com/Computers2/articles/TASKMAN.htm -
Original title: HELPPPPP
My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/
Hey ChelseaHarris,
Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
Could not start the Windows Security Center service.If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
Microsoft safety scannerHope that helps.
-
Original title: error report function
When I use the error report feature a warning appears "problem connecting to the Windows Error Reporting Service. Please try again later! »
It started some time ago and I have plenty of backup errors.
Using W7
Hi John,.
I suggest running Disk Cleanup and selecting Remove all the Windows Error Reporting log files by selecting the checkbox and then click OK:Check if you are then able to start the Windows Error Reporting Service. -
Windows xp Task Scheduler service does not start
I have a problem with the Task Scheduler in XP SP3 (home edition) service. The service is configured to start automatically, but hangs during startup and the State is 'starting' permanently In this State, I can't start or stop the service manually. If I disabled the service completely, restart, put it to manual and click Start, I get the following error:
Unable to start the task on the local computer Scheduler service
Error 1053: The service did not demand launch or control in a timelyI am under an administrator with a password account, so that shouldn't be the problem
The CPP and the services event log work correctly (Autostart value)I need to get this service running in order to allow the read-ahead on this pc. Currently the prefetch folder is totally empty the .ini file is missing as well as all the .pf files. I tried to rebuild the .ini with the help of the > rundll32.exe advapi32.dll, ProcessIdleTasks< command="" at="" the="" command="" prompt="" but="" this="" doesn't="" do="" anything,="" probably="" because="" of="" the="" lack="" of="" the="" scheduler="" service.="" in="" the="" registry,="" enable="" prefetcher="" is="" set="" to="" 3,="" monitoring="" both="" applications="" and="">
Scheduler tasks and prefetch worked very well - I think that a setting in the registry is damaged or missing. Any suggestions on how to fix this? Thanks in advance.
It's curious. The ST journal file must be in the Windows folder.
I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
Here is the link to my SkyDrive and you can get the file you need here:
http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311
When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.You have to put the downloaded files in the correct folders on your system.
I don't know where to put the file mstask.ini - windows\system32 maybe? There is no .ini file in the folder inf. so I don't know and you may need to try different places and keep reading...
I don't think I've never reinstalled TS (but other things) so I did all the instructions on how to do it, but if the installation stops and asks you for a file, at this point, leave the installation 'wait' and then search your HARD drive for the file he wants to (be sure to include the search for hidden and system files too) and if/when you find return to the installation of waiting and fill the void or navigate to the folder where the installation file is enough (point installation where the file is, so it can find the file he wants to) and continue up to the next point. You may need to do it for multiple files until you get all the way through it and you will see that some are just not on your HARD drive and you need to download. You can't cancel the installation and start over every time - just work through a single file at a time by pointing the installation to the folder where the file he needs.
Maybe later, I reinstall my TS service to practice and be able to understand the files he needs and give some better advice about this.
Comodo may also interfere (I do not use it, but it's possible). Did you see if your TS will start with disabled Comodo?
You should also consider the malware, then you might want to start with this:
Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.
Maybe you are looking for
-
Firefox updated the browser. I'm a symbol of the admin in the corner of the icon (win7) whenever I run the application ff it ask if it is ok for firefox to make changes on the hard disk, enter admin password try to disable or correct thank you don369
-
Characters are human and machine entries no is madedo no display on the screen
I think that the system is called CAPTCHA
-
Tecra 9100, Windows Explorer & Desktop crashing!
I have a Tecra (40 GB) 9100 lately, my Desktop (!) and Windows Explorer crashes on me. When I finish the task and relaunch in the Task Manager, the performance of the processor goes to 100%, and the fan starts going CRAZY (obviously) good that only o
-
New samsung 23 "monitor how to fill the horizontal screen
bought the new samsung 23 "monitor. How can I fill screen horozonially? A moderator has moved this thread to Windows for the hardware and drivers Forum of Feedback Forum
-
HP Officejet Pro 8600 Premium e-all-in-one
I just finished installing and things seem good according to me, except that when I connect to my account online, I see for the status of my printer a yellow triangle with an explianation sign in it and message indicating that he has a "problem with