How to stop the disk for Dell Dimension 9150
Hi all
I have a Dimension 9150 with a 145 GB HARD drive (officially 160 GB?). The HARD drive works well, but it makes a lot of noise. I'm ready to buy a new HARD drive, unless there are other solutions to try with this type of computer. I am a beginner on discs hard non-technical language would be highly appreciated :).
Thanks in advance!
Tags: Dell Drives
Similar Questions
-
How to stop the demo for Sony KLV-32R412B
How do to stop the demo for Sony KLV - 32R412B.can u please help me
On the remote control, press RETURN, then press HOME and select [Settings] - [System] - [Autostart]. Be sure to select [home] [location]... I found the solution myself
-
How to synchronize the Contacts for Dell Axim X 3 with Windows Vista.
Original title: synchronization
I have a Dell Axim X 3 with lots of contacts I want to sync with my Windows Vista laptop. How can I do this?
Hello
You can check these links:
Windows Vista Mobile Device Center step-by-step guide
http://TechNet.Microsoft.com/en-us/library/cc722321 (v = ws.10) .aspx #BKMK_5
If you have the 32-bit operating system, install this:
Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=14
If you have the 64-bit operating system install this:
Microsoft Windows Mobile Device Center 6.1 for Windows Vista (64-bit) driver
http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=3182
Know the version of the operating system installed to check out this link: am I running the 32-bit version or 64-bit Windows?
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit
For more information you can contact the support Windows Phone.
-
How to stop the slide for the duration of the legend? How make it slow down a notch?
Hi, I am very new to Captivate, but I can only borrow for tonight so please help.
I captured a video with Captivate and now I have to add a few legends. But the video is short, so I want to slow it down a bit in some areas (if possible) and I would also like to pause the video during the duration of the legend. So it would be similar to adding breaks for captions.
Is this possible? How?
I could be wrong, but you save Full Motion? When you add text captions, the duration of this legend is determined by CP took into account the amount of text to read. In the timeline panel, you will see the duration (time), captions, you can always adjust by changing the properties of this legend, in the sheet "Options". If you want the legend to stay until the user clicks, you will need to a button or a box click to trigger the slide to continue. In this case, you can also change the calendar of the legend of text 'for the rest of the slide.
Moreover, you can always download a full version of Captivate work and use it free for a month.
-
How to stop the notices for a download, that I DON'T WANT?
The last time I downloaded an update, my computer would not work properly and crashed several times. I have a better than average anti-virus program and I don't want your update and I'm tired of seeing reviews for him pop up! I can always go back to IE if you do not want my patronage.
There are some add-ons that torment you with update of fake messages that lead to malware or other problems. Please take a look at your page of modules and disable all non-essential or unrecognized modules on these two tabs:
Firefox orange (or the Tools menu) button > addons > Plugins category
Firefox orange (or the Tools menu) button > addons > Extensions categoryTypically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
To adjust own Firefox update settings, see this article: Advanced panel - accessibility, navigation, network, updates and other settings in advanced Firefox.
-
How to stop the icon for the volume control on the taskbar to go extinct.
Speaker volume icon continues to disappear from my taskbar. I went into the Control Panel control settings, but it just won't turn on. The fall down to allow me to change the setting will not appear. I can't restore the default setting. I tried Customizing settings, the drop down menu is inactive and it shows also turned off even if I have not turned off. I managed to turn it back on once but I am unable to do it now. I have not changed the settings.
Hello
Follow the steps mentioned in the links below:
Change display it icons in the notification area:
http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area
System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer:
-
How to stop the message you have files waiting to be burned to the disc. I don't want to delete the files I just want the message ent.
Hello
By deleting records, you not delete the orginial files. The original files will be saved in a different location. As suggested above, the files are first copied to a temporary location, and then a disk image file is created. To remove the pop up, you may need to delete the temporary files in the location of "burn".
Hope this information helps.
-
How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.
Please notify. Thanks in advance for your guidance pertaining to my question.
Download QuickTime for Windows - Apple 7.7.9
Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.
The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.
-
Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.
How can I find and open/search the 32 GB of data that fills the disk for possible deletion?
Thank you.
* original title - full hard drive. *
Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.
How can I find and open/search the 32 GB of data that fills the disk for possible deletion?
Thank you.
Download and run JDiskReport.
There are a number of things you can do to- temporarily - free up disk space. The only real solution, however, is to get a larger hard drive.
- You can run Disk Cleanup (start > run > cleanmgr > OK)
- You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
- You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
- You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
- You can reduce the size of your Internet browser cache (depending on the browser that you use)
- You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
But none of these answers you will earn really large amounts of space for very long. The term solution time is a bigger hard drive.
In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files to delete or uninstall applications.
-
* Original title: stoppng updated Automatic windows 10
I asked for information on how to stop the automatic updates on my operating system to windows 7. I received information about windows 8. Help, please.
Change your windows update settings,
Click on the Start button and type in the search box
Windows updates
Click on this list to the top
-
someone stole my computer. How can I disable the program on this computer... or stop the license for this computer/serialnr. ?
Hello
to my knowledge which is one of the benefits of the creative Cloud: just change the password and after a month, the thief can no longer work with her, maybe you can leave same block by Adobe customer service.
And please see Deaktivierung auf einem PC auf den man keinen Zugriff mehr Hat > answer is written in English
If necessary and for any other question, click on through http://helpx.adobe.com/contact.html and 'open' Please use the cat, I for my part had the best experiences. An employee of Adobe Preran I quote: the chat button is enabled as soon as there is an available agent to help.
Hans-Günter
-
How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?
I can not install any new demand every time.
Please see:
http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html
Kind regards
Ashutosh
-
How to stop the abandoned operation messages for the opening of the games on Facebook?
Original title: how to stop the abandoned operation messages
When I connect to my facebook and began to open the game or any game I get this error operation failed and it want start the game... I can open facebook and update the games, but it won't play...
Hi Annspikes,
1. what browser do you use?
2. This only happens with Facebook game?
3. you remember to make changes to the computer before this problem?
If you use Internet Explorer, you can read the following article and check.
Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?
Hope this information is useful.
-
How to stop the open a popup when I click on an icon. I want the icon to do its job.
How to stop the open a popup when I click on an icon. I want just the icon to do its job and open the file. However, I get the crazy popup indicating to choose the program you want to open the file.
When we first got it it has always opened when a user has clicked on an icon. Then he started doing this several months ago, and I don't know why.
Please help if you know how to beat this computer.
Windows Vista Home Edition
CEHHello
There are MANY varieties of the latter with a lot of names, but all can be removed with the
same methods:
are rogue antivirus, scams to get you to pay for them while they have no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
How to stop the blue e screen to start the computer and also if you try to download anything
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
How to stop the blue e screen to start the computer and also if you try to download anything:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
We need numbers BBCode or Code to stop the bluescreens and utilities below will help you
provide us information. Also the methods here can help you solve the bluescreens.Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Script error does not mail - msktbird_3.js (CAUSE: McAfee - again)
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends. Script: chrome://msktbird/content/mail-msktbird_3.js:904 two boxes: continue the shutdown script It make
-
Update IOS 9.3.1 iPhone 6s has lost the email/contacts/calendar
I have iPhone 6 s. 9.3 9.3.1 update last night. Today my phone crashed, turn walk, walk and finally got it, but contacts, all e-mail and calendar accounts are gone. Apps seem to be there. Problem started when I connected my iPhone to the computer
-
Why Apple Support community-is such a maze. Surprisingly, after much effort, I have a question was asked and answered to (helpful but not completely). In trying to follow up, I have found no direct link in my email, no way to find my name in the co
-
LaserJet M1212nf: Driver LaserJet M1212nf
I have to re - install my HP Laserjet M1213nf printer, but HP no longer supports this printer. Where can I get a driver for this printer? HP supports the LasetJet Pro M1212nf and I installed this driver, but it will not be printed. When I try to p
-
I get this message at startup 'c:\Windows\system32\config\systemprofile\AppData\Local\omonubil' access denied. It doesn't seem to affect the operation of my computer, but it's annoying, someone knows how to fix this?