LaserJet M1212nf: Driver LaserJet M1212nf

Similar Questions

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• Print driver error with HP LaserJet M1212nf Professional on Terminal Server in Windows 2008 (32-bit)

  We got a lot of printers LaserJet m1212nf installed the SAME version of the driver on the server and desktop computers and nothing is printed using Easy Print. No errors, no message, but nothing is printed, only when a test page is printed the server will display a warning: "no test page cannot be printed.

  After that, we try to use the HP instead of the TS Easy Print driver, forcing group policy first use the Hp driver. But the terminal server server always use the easy print driver so we are in the same way.

  If we try something else... THE PILOT XPS... but it works on the desktop PC, we try to print a test page in office printer properties, but "no test page cannot be printed" is shown... my God!

  WHAT CAN WE DO?

  Hello

  Thanks for the post.  I have included a few links below, one to a document and the other to a software download.  If everything goes well between these two, we should be able to get this installed and get up and running.  Good luck!

  http://support.HP.com/us-en/document/c01998962

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-81123-2&cc=us&DLC=en&LC=en&OS=4022&product=3965849&sw_lang=

• LaserJet m1212nf network - how to get the printer in a network?

  I have a LaserJet Pro M1212nf, who does not have wireless capability.  I'm on a desktop PC, Windows 7 and am connected with a USB cable from the computer to the printer. There is no other Windows 7 computers on this network, so so far I didn't have need of this feature.

  I spent an hour trying to figure out how to be able to print from my iPad with Airprint, that comes with this printer.

  The printer is shared, which I thought was enough, but apparently not. I found the instructions on the use of a printer wireless, which is not the case, and using an ethernet connection, which I am not, but nothing about the direct USB connection. I found instructions on changing a USB connection to an ethernet connection - this is what I have to do? I hope someone can help with this.

  Should I switch from USB to ethernet to be seen on the computer network and iPad? There must be a way to do this, but I am confused.

  Thank you.

  You should be able to install the printer with the normal software via an Ethernet connection to your router.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3965849

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS this software should include the installation via the USB port option and then convert to USB wireless > Wireless Setup Wizard.

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• [SOLVED * nix way] How to get a professional M1212nf MFP from HP LaserJet with Win 2008 R2 work?

  Hello

  We bought four HP LaserJet M1212nf professional MFP and should have read forums first

  Our goal is to give our Printserver (Windows Server 2008R2) the actual driver. Printer is used only from clients for Win 7 64 bit.

  Whenever we install the driver on our 2008R2 printing service stops and has to be started manually.

  In some trials, we could install the driver but when connecting to the network printer to a customer the printing service on the customer every time we stops try to print.

  In several forums, I read about the problems with this printer based on the host and looking for a workaround solution. Read comments to disable bidirectional printing and disabling winding on the client. With this set of options does not stop my printing service, but also, it does not print

  Universal driver does not work on this host-based printer.

  Further, I tried HP Laserjet 4, pilot with the above mentioned switches together but that does not work, too.

  Any help would be appreciated.

  Best regards from the Germany

  Sascha

  Hi pcwizard,.

  now, here is our solution for this problem:

  1. A small linux of your choice of installation installation and install the cups
  2. Install the hplib (http://hplipopensource.com/hplip-web/index.html)
  3. Add the printer using the hp-setup utility (you must do this with each M1212; simply copy entries and change the ip in the configuration of printers will not work). The hp - Setup utility also installs the plugin owner.
  4. Create a new printer on your windows server
  5. Select new connection and create the connection with your new server name and printer cups
  6. Choose the HP Universal PostScript driver or any other postscript driver (otherwise the cups server will not make the task)
  7. In the printer properties select printing goes directly to the printer (for the cups in this case server)

  Once you have completed the printer worked very well for each workstation (linux too).

  I have now four printers work in my network.

  Best regards

  Sascha

• HP laserjet m1212nf mfp printer: HP laserjet m1212nf mfp printing issue

  Hello world

  I have a strange problem with my HP laserjet m1212nf mfp printer after updating to Windows 10 on PC1

  Updates are made, tried to reinstall ect.

  Now, when I tried to print it says required attantion

  But if something is that on PC1 and I decided to print from another pc and any operating system then Quebec on the prints of PC1.

  Any idea what could be the problem?

  I also ran problem solver and Diagnostics for windows 10 and HP (doctors ' something tool ') cant remember the name

  Help, please!

  Thanks for the help everyone, I managed to solve the problem.

  The soluction (Windows 10)

  Uninstalled the printer one again, then when you search for printers I chose that the printer was not on the list (although is has)

  Installed by using the IP address of the printer, after that, it will ask if you want to keep the driver or replace by the network (that) printer and success problem printing free driver

  In the future no update new printer

• AirPrint from a PC to a LaserJet M1212nf multifunction printer?

  Hello!

  I have a HP LaserJet M1212nf MFP and connected to the network via Ethernet and was delighted when I saw that I could Airprint (wireless) in all 3 iPhones and the iPad in the family!

  I wasn't very happy when my 3 windows printers only ePrint using docs attached to emails and then only certain formats.   I expect this lack of functionality of a specific printer Apple, but not a HP printer!

  Through Googleing I saw what I thought, this was the answer: to trick my PC into thinking it can print (wireless) to an airprinter (LaserJet M1212nf) through the network, but nothing panned as being...

  HP has really disappointed this time around.  Any suggestions?

  Thanks in advance
  Joe

  The recommendation is how I'm set up...

  I think I solved it however.

  I had installed the original with a USB cable drivers, and when I disconnected, I looked for changes in configurations in print wireless driver, I even reinstalled the drive locally to nothing does not.

  When I used the URL of the server web printer and installed the driver via the web server it installed the software again, but much smaller this time 50 MB vs. 200 MB, this newly installed printer will be printed as a network of all my apps windows printer.  He is represented by a different icon that suggests that there is not all the features of the inslalled USB driver, as analysis.

  Every thing about this installation, of setting up ePrint, to solve this problem with the PC printing has been a nightmare.  HP really left the ball on the documentation understandable as far as I'm concerned.

  Thanks for your help. :-)

• LaserJet M1212nf MFP prints on labels

  My Laserjet M1212nf MFP will not be printed on the labels. Select 'labels' as the paper type, I get the large popup telling me to load support.

  I use Avery 5160 labels

  I can print the same labels on plain paper without problem.

  Hi Michel,.

  When the printer is set to the current settings and receives a request for the written press which is not currently installed and configured in the printer, it will prompt you can load the media is requested to print on.

  According to the description, it seems that the printer has not said the type of media that is loaded in the tray.   When he thinks that the driver you select labels, the printer itself, it commissioned from plain and requests that you load the labels.

  The following is a section of the User Guide. On Page 57 there are instructions to change the setting from the default document type.  If this setting is changed to 'Labels' and 'Labels' request from the driver, you should not get the prompt on the control panel again.

  

  Please try this and see if the prompt disappears.

• HP Laserjet M1212nf transformed into HP Laserjet P1015

  Dear Sir

  HP Laserjet HP Laserjet M1212nf in my office when it is connected to a computer always ask for driver Laserjet P1015 and do not want to install with the pilot M1212nf. and the lcd screen is blank with led indicator 3 are on. I think that there have bad firmware update, please tell how this solution, thanks.

  Hi menungsa,

  Download and update the firmware from the link below. Make sure that the printer is connected to the computer via a USB cable to update the firmware.

  HP LaserJet Firmware Update Utility

• LaserJet M1212nf MFP

  Why a print a file driver HPIII HP4 or HP5 HP6L printing when it is sent programmatically to a LaserJet M1212nf MFP?

  I have installed each of the HP LaserJet mentioned above, while they would feel in a file.  I'm testing a software that transforms the raw data to a PCL printer.  Only one file printed to the M1212nf print correctly.  Other files appear in the print queue, but never print.

  Hello

  Any printer PCL as mentioned above cannot be used with the Laserjet M1212 that isn't a PCL printer.

  The Laserjet M1212 supports printing Hostbased, not the PCL5 and PCL 6 printing language language.

  You can find the data sheet below, within the LANGUAGES of PRINTER STANDARD section:

  http://www.shopping.HP.com/shopping/PDF/CE841A.PDF

• LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

  I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the piece that jumped.  Anyone know where it's going?  Thanks in advance.

  

  Hi @deejaygreg,

  Welcome to the HP Forums!

  I see that a roll of spring/jump our of your HP Laserjet M1212nf MFP printer. I'm happy to help you!

  The only suggestion I have for you is to please contact HPtelephone support for further assistance. To repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• Problem HP Laserjet M1212nf Professional USB

  Hi, please help, I bought this HP Laserjet M1212nf Professional about 7 months, I rarely use it. It worked fine before today. Recently my computer laptop windows 7 does not yet recognize. He repeated on the "peripheral USB malfunctioned". I've uninstalled and reinstalled the software, I also connected with the laptop from a friend and I used another cable, still no response, no connection. What I can do. help with goodness, its urgency. Thank you
  

  Hi kluzi,.

  Yes, your printer has a warranty of 1 year on it no matter if you registered or not. Call the number below to speak with a customer support representative.

  Nigeria
  (01) 271 2320.

• Set up a dial for Laserjet M1212nf group fax?

  I installed my all-in-one to a deskjet 4500 to the Laserjet M1212nf.

  On my old printer/fax, I could set up a speed dial to send the same fax to several fax numbers in the phone book with speed control knob just a dial.

  For the life of me I can't figure out how to set up a speed dial to a fax from the Group on this machine! It makes me NUTS. Is there a separator, you can use to enter multiple numbers or?

  I would be really disappointed if a feature I had on my cheap HP $69 ink jet is not available on this printer laserjet much nicer and more expensive.

  Here is a link that will guide you in this direction.
  http://goo.GL/7Cu4U

  At the bottom of the page, it shows the fax configuration and leads to installation speed dial.

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,