How to take screenshot on the Toshiba Windows Tablet
I have Toshiba tablet with 8-1 win and I don t know how to take screenshotvI obly volume buttons and the button / stop
Fact a search google apparently you press Windows key + low-flying
It work?
Tags: Toshiba
Similar Questions
-
How to take screenshots with the new IOS update
How to make a screenshots after the new IOS update
Screenshots are taken in the same format as always: just press the power button and the home button at the same time. If for some reason, this does not work on your device, restart it and try again.
-
How to take screenshots in Windows 8?
How to take screenshots in Windows 8?
Hi Mike,.
Just hold down the Windows key and print screen to take a screenshot and the screenshot will be saved in the pictures folder.
Kind regards
Charlie
-
How to take screenshot in Windows 7?
I need to take a screenshot after a few seconds. My PrntScrn Key is dead. Is it possible to take screenshot without using print screen. In fact, I want to take screenshot of my desktop context menu.
With respect,Thanks in advance...Normally, all you need to do is just press Prt SCr (Note: you will not receive any confirmation that the screenshot was taken), open an application such as Wordpad (Start Menu, all programs, accessories), then right click and paste.
Press the Fn key
If you find the print screen command a keyboard not working not on your laptop, you may need to use the "fn". In some laptops, you must press the Fn key, as well as the printscreen key to do the job. The Fn key is located between the control and the Windows key in the lower left corner of the key board.Some laptops and other mobile devices that do not have a print screen button could use other combinations of keys, such as FN + Insert, to capture the screen. Consult the manual that came with your laptop or device for specific instructions.
If you use a control wireless keyboard on lock (locking function) key on your keyboard. Check top right of your keyboard to the F LOCK key, which can be you can use the print screen key. The CAPS LOCK key activates / deactivates the function keys. A function key is a key that has two possible commands depending on the State of the lock toggle keys.
http://support.Microsoft.com/kb/894037
http://support.Microsoft.com/kb/894513/en-usI would advise you to read all of these links:
http://www.Buzzle.com/articles/print-screen-not-working.html
http://www.WikiHow.com/take-a-screenshot-in-Microsoft-Windows
http://www.intowindows.com/how-to-take-snapshot-of-start-menu-or-context-menu-using-Snipping-Tool-in-Windows-7-hidden-feature-of-Snipping-Tool/And, Yes, it could be that there is no "freeware available to take the screenshot with a time delay. Just use your favorite searchmachine and take a look at what is offered.
I hope this information is useful.
See you soon
Julia -
How to take possession of the hard drive since the upgrade to Windows 7?
I've upgraded to Windows 7 from XP.
Unfortunately I can't access all the files on my old hard drive that is on my computer as drive E, nor I can access all the files on the external hard drive USB either. He says that access is denied. These readers are related to my old account on my XP system who crashed and died.
How to "properly" take possession of these other drives on my new Windows 7 system?
Previously, I tried to do with my user name on the Windows 7 system to have all permissions. It does not work. It changes the attributes of all files and folders on my other readers but once everything is done, I still have the same problem and I am unable to access it.
I also tried to use a program called "edit permissions" and who did the same thing and I still have the same problem. No method worked.
Please Microsoft, you designed these operating systems if please explain to me how to take full ownership and control hard 'MY' in my XP system discs so I can access all the 'MY' files and folders?
Thank you.
John
- In 'My Computer' (or simply 'computer' now), click on the drive and choose Properties.
- On the Security tab, click Advanced.
- On the owner tab, change the owner to be your username (you will need to search for and select your user name).
- Apply the new owner to "all subcontainers" (all files on the disc).
- Click OK until all of the settings are saved.
- Try to explore the disc again.
-
Can someone help me, how to take a screenshot?
You can make different screenshots.
For any of the screenshot window just press the PRTSC key for 2 seconds.
To the last open window, use ALT GR + PRTSC.Open paint and use CTRL + V and recorded peak appears. Just save it as a jpeg file and the job is done.
To make the screenshots you can use a third request for the part. Google a bit and you will find a large number of them for free download.Good bye
-
How to get rid of the fake windows security alert virus
There was a virus on my laptop in the last two months. on the bottom taskbar, there's a red 'x' icon shield and whenever I try to go it takes me to the esentials Security page and he said: "the Security Center service is disabled" and it lights whenever I try to turn it on. also it doesn't let me access the internet or try to restore the laptop. I tried all solvents of spyware as spyware doctor and malware bytes, but it seems that I still have not had the problem again. help because this situation is greatly appreciated. Thank you
Hello
One way to solve the problem would be to backup your important data (redundancy) and then re - install
Windows after formatting the drive. Check with the manufacturer of your system's support to see what you need to do
that (and you probably already have what is necessary). You can buy the installation discs for Windows in the system
machine cheaply if necessary since you already own windows.=====================================
Another method would be to ensure that the malware is detected and deleted with internet access being
restored.Try typing several times F8 as you start and select a Safe Mode with networking. If that works to proceed to the
methods below. (You can try wired access and wireless if you have both available). If this does not work
then use another computer to download the drivers and the necessary programs and transfer them to your machine
on removable media.It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
========================================
========================================It's my generic how updates of appropriate driver: you want to update the drivers WiFi and wired (NIC).
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
==========================================Make sure you know the details of connection to your router wireless and wired - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
A lot of images. How to select by using the preview window (work area)?
I have 15 images that I put on a background (picture 16) in the style of a collage. Each image has an adjustment layer bound to her for me to mix an image manually in the next. This worked fine, but now I have 15 images with rounded edges and I learned how to change them, I hit a problem, that I wasn't expecting. My planned process is to move these images in a variety of sizes and positions until I got the look I love. The only way I could work on that's too painful (scrolling up and down my palette of layer until I find the picture i took for target, select the layer, Ctrl + to highlight in the preview window and then move and size). With 32 layers, it is very tedious. It makes more sense for me to select in the preview window (even if it means hitting a hotkey multiple times until I select the picture I want to work with).
Maybe I approach the task entirely the wrong way. I'm willing to try any suggestion. I like to do this kind of project, and I moved to Adobe because I thought that I could take advantage of its extra power to do a better job.
I am relatively new to PSE 8, but not new for photoediting. I, are looking for an answer on this forum and the web in general, but can not get close to a solution. Thanks for your help!
Edit: Using the technique I describe above, when I move to the work area (what I called window preview), the layer I selected off the coast of the Layer palette has a finely dashed around it, there is another area apparently random, highlighted by a blue line and line dotted yet another seemingly random area highlighted with a heavier white. These hold the key my solution?
To make it more clear what I'm trying to do-, here is a brief description of it: the final result is a print for a friend who was a torch for the relay of the Olympic flame to 13 x 19 inches. I have a map of Canada with the road on this issue and 15 images are pictures of his 15 minutes of nirvana. I want to fuss around with transparency, size, rotation, each of the images. I am very happy with the adjustment layer feature (which allows to paint me with transparency). the rest, I thought would be easy, but...
Yes, that's the downside of the technique, it's that you need move the brush and gum to get your mask just a clipping mask.
No way around that.
As far as being able to see what your paint before painting, make a copy of your image layer and put it at the bottom of your layer stack
Then, set its opacity to say 75% or so to be semi-transparent.
Now you can paint on your layer mask to bring your full image. Hide or display the background layer let's you see the result and quickly return the Semitransparent 'outline '.
See attached screenshot.
-
How to take screenshot on Firefox OS 3.0 nightly?
I've updated my Firefox OS 2.0 to 3.0 nightly. After updating, I am unable to take screenshots with my camera. My camera is t2mobile flame. How can I take screenshots with it? Please help me.
Hi Raiyad Raad,
The key combination to take a screenshot should be always the same:
- Press and hold the POWER key and the VOLUME DOWN key simultaneously
Try holding it a little longer. A second or two should be sufficient to take a screenshot. =)
-Ralph
-
How to take screenshot of Eve?
I am trying to press a button the Crown and the power to take a screenshot of the eyes shows current, but nothing happens. How to take a photo of the looks?
Hello
To take a screenshot, hold down the side button on your Apple Watch and also press and immediately release the digital Crown.
The screenshot will be added to the Photos on your iPhone.
-
Take Screenshots of the view/layout programmatically
Hello
is it possible to make screenshots of containers for example DockLayout,... etc and all its children (not the entire application window)? I found a class of screenshot in the docs, but it was only able to make screenshots of the display and the application window.
http://developer.BlackBerry.com/native/reference/Cascades/bb__system__screenshot.html?f=Screensh
Thank you.
No, which is not supported. You can take a screenshot of the entire screen.
-
BlackBerry Z30 how to take screenshot in Z30 BlackBerry?
How to take print screenshot in blackberry Z30. A few times to share the message of error in support of the developer.please.
Press up and down volume keys at the same time.
-
How to take screenshots for 4.7 "and 5.5" ios devices?
Hi all
I'm used to create screenshots of my AIR applications using a combination of actual screenshots on the devices I own and screenshots of the stand-alone player by testing the AIR application on my development machine.
However, I do not have the new 4.7 "or 5.5" iOS devices and resolutions for those who are larger than my screen, so I can't take a screenshot of this way. The screens are 750 x 1334 and 1242 x 2208 respectively.
My application is portrait only.
The standalone flash player automatically resizes down to adjust to the screen at launch. If it didn't, I would be able to move it, take screenshots and assemble the images.
Does anyone have advice? Perhaps a way to make sure that the flash player window is not resized in function within the limits of my screen?
See you soon,.
Peter
I thought about it
When you run the application locally, must assign
false to stop the player flash of sizing down.Then I stacked my monitors vertically instead of side-by-side (not physically, only in the display settings) to take screenshots.
I hope this helps someone else!
-
How to take an incremental backup in windows server 2008R2 64 bit
Dear helpdesk,
I am unable to take an incremental backup in windows server 2008r2. Whenever he takes the full backup.
Help, please.
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
How? Resize photos in the Gallery Windows without email?
Hi all
I need to know how to resize a photo in the Gallery Windows 1-4 (2). I want to keep this version of Windows. I don't want to send this picture. Rather, I need to resize the photo, save to my computer for later posting in a forum, I belong.
The only option I see for resizing is in email. Ideas?
TinaHi all
I need to know how to resize a photo in the Gallery Windows 1-4 (2). I want to keep this version of Windows. I don't want to send this picture. Rather, I need to resize the photo, save to my computer for later posting in a forum, I belong.
The only option I see for resizing is in email. Ideas?
Tina==================================
Maybe this article will be useful:Resizing Photos in Windows Live Photo GalleryIf this is not the solution you ae looking for...
the following free resizer might be worth a try:VSO Image Resizer
http://www.VSO-Software.fr/products/image_resizer/VSO Image Resizer: tutorial
How to resize my images and photos?
http://www.VSO-Software.fr/products/image_resizer/how-to-compress-photos/how-to-resize-images-Guide.phpJohn Inzer - MS - MVP - digital media experience
Maybe you are looking for
-
Tecra M7: Problems of Vista with the evolution of the functions of the tablet buttons
Why he isn't an American version of this forum I'll never know... First question: when I try to change the tablet on my Tecra m7 said button buttons he has changed, but it is not what I said at. For example, I want to put the right arrow on the multi
-
Satellite P30-145 has no backlight?
I have a satellite P30-145, which I have owned for 1 year and 2 months. Yesterday, I went to turn it on to find the image on the screen was very very low, to the point where it is very difficult to do anything. I know that there not the works of fine
-
How to change the visibility of an indicator programmically using a checkbox
1. How do I change the visibility of an indicator of programmically using a checkbox? 2. How can I change the color of a thermometer? I mean, this is how I can change the color when the temperature reaches a certain value?
-
HP 8720:8720 - when I print a color copy - I get a black line on my copy.
When I copy in color, I get a black line on my copy. He can't get on my black copies. I changed all my ink cartridges, but it has not solved the problem.
-
Have windows 7, Quad Core. ASUS Pt6, geforce 5850. no problem until this only changed for windows 7