How to troubleshoot a failed transplant recovery?

Similar Questions

• After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

  Original title: start windows vista to the top of the page. (URGENT)

  My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

  Hi Antonio,.

  You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
  update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358/en-us

  Also see the KB article and check:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

  I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
  Here is my configuration:
  CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
  Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
  Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
  Storage: Intel 330 series 240GB 2.5 "Solid State Disk
  : Fractal Design Arc Mini Micro ATX mini-tower case
  Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
  Optical drive: Lite-On iHAS124-04 DVD/CD burner
  Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
  Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

  And here are two mistakes STOP I was able to capture up to now:
  STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

  STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

  This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

  Original title: how to troubleshoot and resolve problems blue screen for new construction

  Hello

  Bug_Check F4 is generally hard, cables, and associated hard drive controller.

  Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
  both ends where possible) - actually delete and replace - do not just tight. Make sure heat
  sink and compound are correctly placed and that all lovers of work.

  Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
  for problems known.

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  =============

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other control
  software.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0x3: Process of 0x6: Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to troubleshoot the plugin does not not in Acrobat

  Hi all

  I am just starting to develop my Plugin and I'm unable to troubleshooting / debugging.

  First of all, a bit of history:

  I start with a simple example, based on the example of BasicPlugIn that adds a menu item that displays a form of language c# .NET. I have the .NET extracted via a C++ wrapper shape.  I'll call the wrapper of the plug. At this point, the MyPlugInCommand method has a single line:

  CFW CoyoMenuFormsWrapper;

  This line is simply instantiated the exported class.

  If I DELETE this line and debug, everything is great. I touched my breakpoints and the menu item is displayed in Acrobat format.

  If I LEAVE this line and debug then nothing. No point of debugging, no menu item.

  I suspect this is a. Problem loading the DLL and I conducted depends.exe the and it showed nothing unusual. The exported dll that has the wrapper (Adobe2Net) is present and reported in detail.

  Acrobat records all errors that might give me a clue? I see nothing in the event logs or ProgramData. Any other suggestions on how to troubleshoot the loading has failed?

  Thank you

  Mark

  .

  Just followed this issue closely.

  I could get my plugin to work if the DLL in the folder plug_ins, but which was not possible for me. I opted to go down the road of COM Interop and it works very well.

  Thanks for the help.

  Mark

• How do I start the Windows recovery environment (WinRE)?

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
  How do I start the Windows recovery environment (WinRE)?
  I mean what key should I press during the boot process for Windows re menu?

  In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

  Hope it's the same on your.

  Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

  / Torbjörn

  Post edited by: ssstsg

• How to change your Microsoft account recovery phone numbers

  Original title: microsoft account

  How to change your Microsoft account recovery phone numbers

  Hello

  Please see this link for more on this topic.

  http://Windows.Microsoft.com/en-us/Windows/account-security-password-information

• How do troubleshoot you a USB virtual COM port?

  Object

  Send orders of Labview to an Arduino board using the Advanced Serial write and Read.VI.

  The problem is that no orders are received by the Arduino.

  However, I can use the Serial Monitor built into the Arduino IDE to send commands to the Arduino and get the required result.

  I checked baud rate, the designation of COM port and the command is a simple as string 600,0.  The VI shows no error message.

  So, I'm looking for suggestions on how to troubleshoot a USB virtual COM port.

  Howard

  
  

• How can I get a factory recovery disk or the Windows XP support?

  Original title: support for Windows XP?

  How can I get a factory recovery disc or support for Windows XP for a HP Media Center Desktop PC M7067C? I'm trying to rub the PC, so that I can donate. It will not start now. I had no media or can't find it. Computer was shipped loaded with s/w.

  Thank you
  cmp_ms

  I think this is what you need:

  Performing a recovery system (Windows XP) HP

• How to delete files on the recovery disk?

  I'm running out of space on my recovery disk.  I noticed that the compress and the index of the boxes are both checked.
  I would like to know what to do and how to delete files on the recovery drive.

  Thank you for your help.

  It is very unwise to delete these files, because it is your ONLY way to recover your PC in the event of catastrophic problem with the operating system that cannot be repaired by returning your PC to set up "out of the box.  In fact, most of the PC with a recovery partition you cannot save data on that partition.  If you are still determined to do the easiest to remove these data is boot safe mode with command prompt.  Set up the focus on the recovery partition and delete everything form the command line.  I'm not trying to be insulting, but if you don't know how to do that you probably shouldn't be remove your data from the recovery Partition because without falling back on you should have to be pretty savvy to reload Vista and install all the drivers on your own.  Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• How to troubleshoot scripts plugin does not not Linux

  I added two scripts of plugin for my client Enterpirse of SUSE Linux 10.

  But it does not work. How to troubleshoot?

  Where is the journal of bbclient errors.

  ------------------------------------------------------------

  Home/BB/BBC4.40-bbpe/ext/BB-DB2.sh

  Home/BB/BBC4.40-bbpe/ext/BB-Memory.sh

  ------------------------------------------------------------

  Here's the ps - ef grep form the client server:

  -----------------------------------------------------------------

  BB@xxx:~/BBC4.40-bbpe/etc> hostname

  XXX

  BB@xxx:~/BBC4.40-bbpe/etc> ls - 1 | grep XXX

  BB@otwdev:~/BBC4.40-bbpe/etc> ps - ef | grep bb

  BB 922 1 0 12:56 pts/7 00:00:00 / bin/sh./runbb.sh restart

  BB 925 922 0 12:56 pts/7 00:00:00 /home/bb/bbc4.40-bbpe/bin/bbrun

  -a /home/bb/bbc4.40-bbpe/ext/bbcd

  BB 930 1 0 12:56 pts/7 00:00:00 / bin/sh./runbb.sh restart

  BB 935 1 0 12:56 pts/7 00:00:00 / bin/sh./runbb.sh restart

  BB 945 1 0 12:56 pts/7 00:00:00 / bin/sh./runbb.sh restart

  BB 945 946 0 12:56 pts/7 00:00:00 /home/bb/bbc4.40-bbpe/bin/bbrun

  -a /home/bb/bbc4.40-bbpe/bin/bb-local.sh

  BB 997 11579 0 12:45? 00:00:01 [kdeinit] konsole

  BB 1064 997 0 12:45 pts/3 00:00:00 / bin/bash

  BB 1799 930 0 12:56 pts/7 00:00:00 /home/bb/bbc4.40-bbpe/bin/bbrun

  -a /home/bb/bbc4.40-bbpe/ext/bb-db2.sh

  BB 2397 935 0 12:56 pts/7 00:00:00 /home/bb/bbc4.40-bbpe/bin/bbrun

  -a /home/bb/bbc4.40-bbpe/ext/bb-memory.sh

  BB 2713 11579 0 12:48? 00:00:00 kdesu u root - c/sbin/yast2

  BB 2901 1 0 12:48? 00:00:00 / opt/kde3/bin/kdesud

  BB 4471 11579 0 12:41? 00:00:00 [kdeinit] konsole

  BB 4559 4471 0 12:41 pts/1 00:00:00 / bin/bash

  BB 10356 4731 0 10:15? 00:00:00 / bin/sh/usr/X11R6/bin/kde

  BB 11579 1 0 10:15? 00:00:00 kdeinit4 running...

  BB 11587 1 0 10:15? 00:00:00 [kdeinit] dcopserver - nosid

  BB 11599 11579 0 10:15? 00:00:00 [kdeinit] klauncher

  BB 11613 1 0 10:15? 00:00:00 kded [kdeinit]

  BB 11670 10356 0 10:15? 00:00:00 kwrapper ksmserver

  BB 11674 1 0 10:15? 00:00:00 [kdeinit] ksmserver

  BB 11693 11579 0 10:15? 00:00:02 kwin [kdeinit] - session 10d4ea77 64000131856755600000165840000_1318576857_742551

  BB 11733 1 0 10:15? 00:00:01 [kdeinit] kdesktop

  BB 11772 1 0 10:15? 00:00:04 kicker [kdeinit]

  BB 11910 1 0 10:15? 00:00:00 kaccess [kdeinit]

  BB 13928 1 0 10:15? 00:00:00 [kdeinit] knotify

  BB 13930 11579 0 10:15? 00:00:00 zen-updater - desktop/usr/lib/w fr-updater / ZenUpdater.exe - patch-view - auto-launch

  BB 13948 1 0 10:15? 00:00:00 [kdeinit] kpowersave

  BB 13951 1 0 10:15? 00:00:00 [kdeinit] klipper

  BB 15094 25309 0 14:54 pts/7 00:00:00 ps - ef

  BB 15096 25309 0 14:54 pts/7 00:00:00 grep bb

  BB 17887 11579 0 12:16? 00:00:00 kio_file [kdeinit] file/tmp/kso socket flange-bb/klauncherBCBbtb.slave /tmp/ksocket-bb/kwritel8dBqa.slave-socket

  BB 17897 1 0 12:16? 00:00:00 kio_uiserver [kdeinit]

  root 24069 24046 12 Oct14? 20:43:03 / bin/sh. / bbconfig

  BB 25225 11579 0 12:55? 00:00:00 [kdeinit] konsole

  BB 25309 25225 0 12:55 pts/7 00:00:00 / bin/bash

  It's really weird.

  then try

  #! / bin/bash - x

  the first line.

  also makes

  ls-l/bin/sh

  point on? / bin/bash?

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• How to install Vista SP1 after that 947366 troubleshooting has failed?

  I have Vista Home Premium 32-bit. I want to install SP1 (and, eventually, SP2 before the April deadline, deadline of 2010). I tried the "Windows Update" - it did not work. I downloaded the installation manual - it did not work. I tried searching for an answer in the forum "Install Vista, upgrade and Acivate", and Mick Murphy (Microsoft Partner) referred me to this forum, the forum "Windows Update". This is probably the right forum to deal with SP1 installation problems vis a vis Vista. Could someone please offer some advice on what would be my next step in the installation of Vista SP1 32-bit? To be more precise on the substantive contribution: I met this http://go.microsoft.com/fwlink/?LinkId=101139link, which redirects to this link http://support.microsoft.com/kb/947366and this link 947366 is where I went through resolution 1 to 4 of the resolution in a vain attempt to get SP1 installed on my computer. In other words, I've tried every resolution 1, 2, 3 and 4 and each result is a pop-up window evoking me the 101139 link. ATER each resolution has failed, I reached the bottom of 4 resolution follows her where:

  Note If the problem is not resolved, this content cannot help you. So, you might want to visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/contactus
   
  which of course makes back off the screen of troubleshooting altogether. I tried to call Microsoft and their lines are busy all the time. I hope that someone else has experienced this similar problem. I did much research on Google, nothing helps. I hope someone in "Microsoft answers" can provide a response to my "question of Microsoft." Again, my question is: what should I do to get SP1 is installed if resolution 1 to 4 of the resolution at this link http://support.microsoft.com/kb/947366 failed? The above is the most accurate description of the problem that I can provide, including the specific error codes and I have already taken measures. Please please please help!
   
  Thank you!

  Paulbyl,
  I suggest that you first run the disk error check and make sure your player is no problem.  Then, run the System File Checker to check for problems with the system files.  If he can find and correct and rerun the System Update tool .  At this point, you must perform a clean boot , and then try to start the installation of stand alone for SP1.

  If SFC finds issues it cannot fix you will need to perform an inplace of Vista upgrade.  Follow the steps described in this article.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get a replacement recovery DVDs

  Hi help!
  My restore DVD will not work.
  After restoration it boote, shows the blue screen of death for a split second restarts.
  I copied the contents of the dvd on another hard drive and a bootable dvd.
  It is just the same installs, but fails on the first restart.
  There is nothing wrong with the computer because I installed XP & it worked fine!
  Anyone know how can I get a replacement DVD

  Soon Paul

  Hi mate,

  first of all, could you please tell us what machine you have? I mean, without knowing your machine nobody can really help you with your problem.

  Regarding your question:

  Here´s a link to a hint of ASP to find nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Visit this link and ask the ASP new recovery media.

  Welcome them

• Satellite L850 - how to replace a HARD disk recovery partition?

  Hello.

  Toshiba laptop Satellite L850. PSKDGA-02Y012. The original HARD drive has failed in his colleagues even mobile, so we replaced the two HARD drive after you have created a recovery USB. When used to restore the operating system to original status of OOB.
  That has worked and portable runs much, but now I want to BACK the recovery partition (now only on the USB I think) for the new HARD drive.

  Simple to shrink the disk HARD C: (partition 2) on the HARD disk, but then how to transfer twhats on the USB (USB recovery stick) back on the HARD drive?

  Thanks for any help.

  Karim...

  Hello karim

  When you buy the notebook you will get it with preinstalled operating system (recovery image). Original recovery image is saved on the HARD disk on the recovery partition.
  Each owner of the laptop has option to make the backup recovery image and create recovery media. It could be the DVD or USB support. You can do this by using preinstalled Toshiba recovery media creator tool.
  This tool will create bootable recovery media that can be used for the installation of original image recovery if there is problem with the installation of image disk HARD recovery or when the drive is defective and must be replaced.

  Where the HARD drive is faulty and should be replaced or the owner of the laptop to upgrade HARD drive, you can install original image created using recovery recovery media (USB). After installing recovery image, you will have the same situation as for the first boot after the purchase of the laptop. With other words notebook will have factory settings again.

  In this case original recovery image is already copied onto the new HARD drive and you will also be able to start the installation of HARD drive recovery. There is therefore no reason to copy a recovery on HARD drive media.
  Please note: installation of HARD drive recovery works with the factory only settings.

  If you have any other questions do not hesitate to ask.

  Good luck.

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.