How to update the registration of existing values, leaving in place

Similar Questions

• How mass update the display name for a group of existing emails?

  We were recently acquired and at the end of April will undergo a change of name of company official. Is there a way to mass update the display name for all or most of the emails without manual update of each individual file in the details by email? I know how to update the name of the company in the configuration > system management > company display settings > name of the company; However, this is only the default display name for e-mail messages that are created from that moment. It is not to update existing records, as I understand it. This will be a huge pain updates of each email for each existing campaign in the program generator, so if there is a solution, please let me know!

  sc * 2799241 * tr-j' thought that this might be the case. We will make do. Thanks for your reply.

• How to block the registration of files with a windows xp-specific extension

  How to block the registration of files in windows xp with a specific extension, example the user cannot save a file with the extension exe or mp3 or another, as management on the filtering of files, windows 2003 server, I can't find the steps for the blocking process I mean in windows xp prof

  Windows cannot do natively.  A file name is simply a file name and you can not prevent the registration of a file based on its extension.

  You can change file associations, such as a double click on a file with a particular extension will not automatically launch an application given, however, but that's not what you asked.
  You may also schedule a program to run from time to time which will erase all files with a given as well.  but until this program is executed, such a file might exist on your disk.

  HTH,
  JW

• How to update the drivers NVIDIA for Pavilion dv6755el.

  Hi, I know it please tell how to update the video card driver, in which rirectory GB installed, because I stood Blue Shield and microsoft has identified that the video card driver is not updated, I followed the procedure of upgrading HP but found no drivers. ? I downloaded directly from NVIDIA updated for my card, but I can't find where the original, but the installer says C:\Nvidia... Thank you

  I don't think it's asking you where to install, it can ask for a place to decompress the files, so just say ok the location by default, he suggests. If the installation does not continue after developing files, switch to that folder where it expanded their and find the Setup, the exe file and run it.

  .

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• refresh rate... How to update the drivers for the monitor in Vista

  How to update the drivers for the monitor in Vista

  You are welcome.

  Normally, you go to the Web site of the pre-installed drivers.

  But, if you have any problems, andf Forum hardware drivers is the best place to ask.

  See you soon.

  Mick Murphy - Microsoft partner

• How dynamically update the role of oracle using the trigger

  How dynamically update the role of oracle using the trigger:
  
  I have svmanger owner of schema in the database. There are five tables belonged to svmanager.
  
  Table A, B, C, D, E.
  
  I have a role that is played only to these tables under the scheme: SVMANAGER_READ_ONLY
  
  now, if I create a new table F under svmanager. the role that svmanager_read_only does not work is updated, so the user had assigned role cannot access table F.
  
  is there a way to create the trigger for this role dynamically update any when a table is created or deleted?
  
  Thank you.

  I really really really don't suggest to do this - it's a bad habit. If possible I'd just adding the grant as part of the steps to the role on the new creation of the table.
  But for fun here's how you can accomplish this:

  create or replace procedure execute_grant(v_ddl in varchar2)
  is
  begin
     execute immediate v_ddl;
  end;
  /
  

  create or replace trigger catch_create_table_trg after create on schema
  DECLARE
  
  ddl_job number;
  ddl_str varchar2(50);
  begin
     IF ora_dict_obj_type = 'TABLE' THEN
  
         ddl_str := 'GRANT SELECT ON '||ora_dict_obj_owner||'.'||ora_dict_obj_name||' TO SVMANAGER_READ_ONLY';
  
         dbms_job.submit(job => ddl_job,
         what => 'execute_grant(''' || ddl_str || ''');',
         next_date => sysdate+(5/24/60/60));
  
     END IF;
  end;
  /
  

  Test it

  create table F (id number(1));
  

  Validate

  select * from ROLE_TAB_PRIVS where ROLE = 'SVMANAGER_READ_ONLY';
  

• How to update the table by using the value of a column in a table field

  Hi all
  use APEX4.1,
  I have a tabular presentation based on the HOLIDAY table, it contains the following fields,

  Leave_id
  Employee_name
  No_of_days
  Status

  Here's the column LOV updateable status.
  Lov includes 2 values IE APPROVE and REJECT
  
  and I have another Table called LEAVE_HISTORY, it contains the following fields.

  Emp_name
  status

  Here whenever the ststus is updated (click the button SUBMIT) in tabular form should also be updated in the LEAVE_HISTORY of the SITUATION of the table column.
  
  I tried the following in the process of "WE SUBMIT AFTER CALCULATIONS AND VALIDATIONS,"

  begin
  update LEAVE_HISTORY set status= status where upper(employee_name)=upper(emp_name);
  end;

  but it is not kept up-to-date,
  When we updated through forms we can use something like this,

  update LEAVE_HISTORY set status= :P200_status where upper(employee_name)=upper(:P_200_emp_name);  <----here we are referring page item i.e (:P_200_emp_name)

  as the code above, how to run the columns in a table?
  Thank you.

  Hi Gurujothi,

  Try this,

  begin
  update LEAVE_HISTORY
  set status= :STATUS
  where upper(Emp_name)=upper(:EMPLOYEE_NAME);
  end;
  

  Brgds,
  Max

• How to update the value of a value in a table

  APEX - 4.1.0.00.32
  Version of DB - 10 g
  Web - OHS server architecture
  Browser - IE8
  Theme - 9
  
  Hello
  
  I have a tabular form and I want to update the value of a field using a process based on an add-on.
  
  the name of the column in the form of tables is (name of column P22_PROJECT_ID)
  
  The error I get is
  
  ERR-1002 unable to find point item ID 'P22_PROJECT_ID' in the application "103".
  
  Error unexpected, unable to find the name of the option at the page or application level.
  
  The field is questioned as
  
  Select pt.project_id P22_PROJECT_ID
  
  The code I'm trying to use in the process is
  
  : P22_PROJECT_ID: =: P10_PROJECT_ID;
  
  I also tried without the colon (P22_PROJECT_ID), but the application does not recognize.
  
  Any help would be appreciated.
  
  Thank you

  the tables for is on page 22?
  the project in page 10

  I think you go to page 22 page 10
  Create a new item in page 22 as p22_project_id
  Since 10 passes as a parameter the page p1o_project_id and set p22_project_id

  by default as p22_project_id

• How to update the name of the provider

  We have employees and suppliers. The type of provider that "'provider used to process the payment of fees in internal employees" "

  Now we have updated the existing employee environment. Now, how to upgrade the provider with the middle name. Is there a standard competitive program updated the supplier according to the employees.

  There is an emergency room that will be shared with you earlier for standard provider, but to employees type provider, you can run 'Employee-update program'.

  This program at any time update the provider name of type used in the corresponding employee records. The program updates only the provider name (the name of the employee update).

  Two following information is not automatically updated:

  1. home and Office Supplier site addresses (update of office location and address employee home)

  2. Inactive Date field for the provider and for the sites of suppliers (updated if a termination date has been entered)

  If the program updates all records, it produces a report that lists each employee who has been updated by the program provider. It lists the previous value and the value of the new, updated. The report is sorted by provider name.

  Thank you

  Oubous khalid

  NOTE: If you consider your question/problem answered/resolved, please, rate this answer as Correct or useful.

  This will help for the rest of the guests to easily find the correct answers. Thank you!

• Re: How to remove the Package of added value?

  I'm having issues (media buttons no longer work) with the package of added value of Toshiba (TAVP) on my Portege M800.
  I want to update, but I can't do it before removing the old version of the TAVP. When I try to install the new TAVP, I get an error message saying that I need to remove the old version first.

  Problem is, I can't find the TAVP on my "Add/Remove Programs" list The internet said it should be on the list, but it is not. The programs are on my computer.

  They do not seem to be among the programs 'package of added value '. How can I remove the TAVP?

  I use Vista and Win7 long on two laptops from Toshiba. On two of them Toshiba Value added Package is listed in the control panel > programs and features and then you can start to uninstall option.

  I've done this several times. It must be there. He is listed as TOSHIBA Value added Package. Check it out at the bottom of the list under T.

• API to update the registration number in the VAT for provider/Supplier site

  Hello

  Is there a public API available to update the number of VAT registration for provider or on the website of the provider? I tried the API below with the provider and it did not work.

  DECLARE

  p_api_version NUMBER;

  p_init_msg_list VARCHAR2 (200);

  p_commit VARCHAR2 (200);

  p_validation_level NUMBER;

  x_return_status VARCHAR2 (200);

  x_msg_count NUMBER;

  x_msg_data VARCHAR2 (200);

  lr_vendor_rec apps.ap_vendor_pub_pkg.r_vendor_rec_type;

  lr_existing_vendor_rec ap_suppliers % ROWTYPE;

  l_msg VARCHAR2 (200);

  p_vendor_id NUMBER;

  BEGIN

  -Initialize session apps

  -fnd_global.apps_initialize (1234, 50833, 200);

  -mo_global.init ('SQLAP');

  -fnd_client_info.set_org_context (101);

  -Assign values of base

  p_api_version: = 1.0;

  p_init_msg_list: = fnd_api.g_true;

  p_commit: = fnd_api.g_true;

  p_validation_level: = fnd_api.g_valid_level_full;

  p_vendor_id: = 588011;

  -seller details

  -Disable the seller

  lr_vendor_rec.vendor_id: = 588011;

  lr_vendor_rec.tax_reference: = '123XXX222 ';

  lr_vendor_rec.vat_registration_num: = '123XXX222 ';

  -lr_vendor_rec.end_date_active: = SYSDATE;

  -lr_vendor_rec.enabled_flag: = 'n';

  ap_vendor_pub_pkg.update_vendor (p_api_version = > p_api_version,)

  p_init_msg_list = > p_init_msg_list,

  p_commit = > p_commit,

  p_validation_level = > p_validation_level,

  x_return_status = > x_return_status,

  x_msg_count = > x_msg_count,

  x_msg_data = > x_msg_data,

  p_vendor_rec = > lr_vendor_rec,

  p_vendor_id = > p_vendor_id);

  commit;

  Dbms_output.put_line ('X_RETURN_STATUS =' | x_return_status);

  Dbms_output.put_line ('X_MSG_COUNT =' | x_msg_count);

  Dbms_output.put_line ('X_MSG_DATA =' | x_msg_data);

  IF (x_return_status <>fnd_api.g_ret_sts_success) THEN

  BECAUSE me in 1... fnd_msg_pub.count_msg LOOP

  l_msg: = fnd_msg_pub.get (p_msg_index = > i,)

  p_encoded = > fnd_api.g_false);

  Dbms_output.put_line ('the API call failed with error' | l_msg);

  END LOOP;

  ON THE OTHER

  Dbms_output.put_line ('the API call ended with SUCESSS status');

  END IF;

  END;

  Could you please let me know if there I no API to update the same?

  Kind regards

  BS.

  Who did not even after initialization of applications.

  Could you please suggest is there anything else I need to do? or is there an other API to update the VAT number of the supplier?

  Kind regards

  BS.

• How you update the document in your model agreement with all changes made in Adobe sign?

  Hello

  I successfully Setup Adobe sign in my sandbox SFDC, created templates with merge mapping and mapping of data... it's all coming together nicely.

  I start sending an agreement, click on "Preview of the signed document or position fields", update all the fields in my agreement (define the length of field, drop down / drop-down list of values... etc.) and send my agreement must be signed. My question is: how to upgrade the document in the model to account for all of the updates I just did this document/contract? I do need to update the fields whenever I send the agreement?

  As long as a Salesforce administrator I was looking for in Salesforce for the answer, but I didn't know that you can add templates to Adobe sign on the dashboard. Once you add a template, you can change all the fields of the form (and the formulas, rules of validation... etc) from the tab 'manage '.

• How to update the table when change list item in the classic report

  Hello
  I worked with apex 4.2 and I create normal classic report with list (named loved) select a column, now I want to update the table when the user changes the list with the new value, I can't create a dynamic action to do this, I create checkbox with the primary key and the loop for check point to update the table but I can not get the value of the list item. and for more speed, the user want to do it when changing the value from the list.
  
  My question
  1. how to do it in javascript and get the value of the list item and update the table with the new value
  2. do I have to use the API to create the list item so I can get the value of the report item or what.
  
  
  
  
  
  Thank you
  
  Ahmed

  You can find a lot of information in this forum (and outside in google) when you search for AJAX processes and demand. However, the tutorial in the link below should be useful:
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/hol08/apexweb20/ajax_otn.htm

  BTW, if we answer your question, don't forget to mark the appropriate post as correct. It will help all of us in the forum.

• How to know the registration State in SQL

  I want to use a database trigger that will push the data into a table of audit use from one table to another table can you please tell me the order how can I recognize the status of the registration, is it INSERT, UPDATE or DELTE
  because I want to PUSH 'I' to insert "D" to delete and 'U' for update
  
  So what is the command for the status of the record in sql and I want only 1 trigger that will do
  
  Thank you

  Hello

  the status of the registration, is it INSERT, UPDATE or DELTE

  It is not on the status of the record, but if your trigger fires wile insert/update / delete.
  You can code in your trigger:

  some pseudo-code of trigger:

  If the insertion
  then
  : NEW. ACTION: = 'I '.
  elsif update
  then
  : NEW. ACTION: = "U".
  elsif removal
  then
  : OLD. ACTION: = A '
  end if;

  You can find many examples on this forum, just do a search on "audit trigger."

  See f.i.: the implementation of triggers to audit on several tables