How to warn the user of unsaved changes?

Similar Questions

• How to warn the user that the application is about to disconnect automatically?

  If a user leaves his workstation unattended for a certain period of time, the Apex application disconnects automatically from the server.  The user is not warned about this and if they attempt to save some data on the current page, they don't realize that their data was not recorded until they click on the "Save" button.  At this point, the values of page element empty out and they realize that their data has not been saved.  It is the current page allows many lines to affix and the user can waste a lot of time entering data which will fall into the compartment bits.

  Is it possible to make my Apex application notify the user that the application has been automatically disconnected?

  Better yet, the user can be notified that the app is about to disconnect and the opportunity to extend their session?

  Thank you!

  Kim

  What APEX version do you use?

  The following link, Although unsupported by Oracle, contains a plug-in (I used) for the expiration times of session allowing notifications customized (about to cut etc..).

  http://www.apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/skillbuilders-session-timeout_188.html

  Keep in mind, it's good for APEX 4.0...

• How to warn the user of record locking?

  Hello
  I updated optmistic locking mode. Wil PESSIMIST not allow me to change the data if another user's lock top. So I changed an OPTIMIST.
  Is there a way Warn (do not deny) my user that another user changes the current record, during validation?
  
  Thank you
  Jose Tuttu

  Hello

  Use as below

          BindingContainer bindings = getBindings();
          OperationBinding operationBinding = bindings.getOperationBinding("Commit");
          Object result = operationBinding.execute();
          if (!operationBinding.getErrors().isEmpty()) {
              FacesMessage facesMessage = new FacesMessage(FacesMessage.SEVERITY_ERROR, "Save operation failed", "Save operation failed");
              FacesContext.getCurrentInstance().addMessage(null, facesMessage);
  
          } else {
              FacesMessage facesMessage = new FacesMessage(FacesMessage.SEVERITY_INFO, "Successfuly saved", "Successfuly saved");
              FacesContext.getCurrentInstance().addMessage(null, facesMessage);
  
          } 
  

• How do to set the policy, the user should not change/reset password twice within 24 hours

  Hello

  I have a requirement in which, the user should not change/reset password twice within 24 hours. Is there a way to achieve the IOM.

  Is there a property in IOM whereby we can set this property?

  I checked the password and all the properties of the system strategy, but he could find a?

  Could you please suggest, how to get there. all references are greatly appreciated.

  Thanks in advance

  If you set password history on don't allow orevious you can reference the table pwh.

  You can also create a UDF who inquire about the handler reset passwoed and check against it. IOM has many points of validation of your code to.

  -Kevin

• Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Than k you

  The user has clicked on Vista, the little lock at the bottom of the START window.

  Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Thank you

  Hello

  Click the account icon that was locked and enter the password IF you know and otherwise:

  Try Safe Mode - several times, press F8 that you start. The Admin account there is no default password
  so unless someone has changed, you should have access there. Then Control Panel - accounts - users
  Manage another account - use this down your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  If no joy Mode without failure:

  Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------

  If necessary:

  Ophcrack is a free Windows password cracker based on rainbow tables.
  http://Ophcrack.sourceforge.NET/

  How to reset a Windows Vista - Trinity Rescue Kit method - password password reset disc - burn the ISO
  http://www.WikiHow.com/reset-a-Windows-Vista-password
  YouTube video on the use of the Trinity rescue Kit
  http://www.YouTube.com/results?search_query=Trinity+rescue+Kit&search_type=&AQ=f

  Reset your forgotten password the easy way using the Ultimate Boot CD for Windows
  http://www.howtogeek.com/HOWTO/Windows-Vista/reset-your-forgotten-password-the-easy-way-using-the-ultimate-boot-CD-for-Windows/

  Offline NT Password & Reset Editor
  http://home.eunet.no/~pnordahl/ntpasswd/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to fix the user accounts in windows 8

  How to correct the user account in windows 8 on new g7 2246nr, I put to your laptop using the Microsoft account then switched to a local account.  I found myself with i admin working the rest of my files are broken up between 3 other user accounts.  I spoke with Microsoft to try to consolidate the accounts and they used a command line in the command, but he has not done. I always work with the system, but it has problems. I reloaded the software so for 3 times. All know how to correct the problem without reload all the software again?  also, after configuring sharepoint in Office Pro Plus, he created another administrator account.  I do not think this would happen?

  Hi BJ2124,

  Although I regret the inconvenience that you had with your experience of Microsoft Windows 8, you can better receive the technical expertise you need by contacting Microsoft about the issue of multiple account creation.

  You can call Microsoft Customer Service at 1-800-642-7676
  Mon - Fri: 05:00 - 21:00; Sat - Sun: 06:00-15:00 (PST)

  As a reference, I included the link to the technical support of Microsoft Windows 8 page:

  http://support.Microsoft.com/contactus/?ws=support

  Also, here is a reference link to change logins to Microsoft for local accounts:

  Microsoft how to switch from one account to a Local account in Windows 8

  And finally, here is a quick reference to solve the problem that you encounter while using an account download troubleshooting tool from Microsoft:

  The problems of account Microsoft Windows 8 with convenience store "Microsoft accounts"

  In this forum support is available for support hardware/software HP. I will provide better supported with your hardware/software of HP. If you need help with a software which is another provider, so I can re - direct you to reference appropriate at this time.

  I hope that you can mark these messages as solved, so that you can inspire others to follow your example with success. You never know who you can inspire.

  -How can I give Kudos? | How to mark a post as solved? --------------------------------------------------------

• Lost admin password, how to retrieve the current password to change it?

  I forgot my Admin password, I connect on my laptop using the scanner print finger all the time and when I try to change the password for Admin it ask the password which I do not remember. How to retrieve the current password and change it in Windows 7 Home premium?

  It's a laptop Acer 5738 G

  You can change your current password as follows:

  1. click on start.
  2. type the three letters cmd in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following command and press ENTER after each:
  NET user "user %%nom" 123456

  Now the password is 123456. While dealing with accounts and passwords: having a single admin account on a PC is about the same as having a unique key for your car. What happens if you lose? He lost? Break it? A robust Windows Setup requires at least the following:

  • Two admin accounts fully tested, with their passwords to record on paper.
  • A password key file. Click Start / Help, then search for help on "password". Follow the instructions to create a key on your USB flash drive file so that you'll never find yourself in this uncomfortable situation.

• How to validate the field "Reason for change" in the commercial indications using JavaScript?

  How to validate the field "reason for change" in the commercial directions Summary tab using JavaScript?

  Current version of PLM4P: v6.1.1.5.2

  Please help me to validate the fields using JavaScript.

  Thank you

  Nefertari

  Developed using some of the Javascript predefined functions that we offer, it's just JavaScript and jQuery.

  But here is an example.

  (Use Internet Explorer F12 developer tools to find the IDS of the fields to work with.)

  $(document).ready(function() { 
  
      if (UI_Ext_isSpecInEditMode && UI_Ext_HasWorkflowBehavior('1005'))
      {
         //normally, we can use jquery to retrieve elements ($('#ifOfInput).val()), but it seems to fail when the id and the name attributes are the same. so we just use javascript document.getElementById instead.
         var reasonForChange = document.getElementById('ctl01$SpecSummaryctl1$ctlCollapsibleContentContainer$ctl00$txtChangeReason')
  
         if (reasonForChange != null) { 
  
              if (reasonForChange.value == null || reasonForChange.value.length == 0) {
                   UI_Ext_MarkFieldAsRequired('ctl01_SpecSummaryctl1_ctlCollapsibleContentContainer_ctl00_lblSpecSummaryReasonforChange');
                   alert('Reason For Change is required');
              }
         }
      }
  }); 
  

  However, not the user registration or workflow specification. If you were to do this, you must remove record them and workflow buttons and links, and this probably isn't the best practice. On the contrary, you would write validation server that would give you this error message if they try to save/workflow. (So most customers do not use Extensions of the user interface for this type of validation).

  Kind regards

  Ron

• Photoshop elements 13 is incredibly tiny on my laptop it makes this useless application, I have a laptop 13 inch.  can you tell me how to make the largest application without changing my screen resolution?

  Photoshop elements 13 is incredibly tiny on my laptop it makes this useless application, I have a laptop 13 inch.  can you tell me how to enlarge the photoshop application without changing my screen resolution?

  Well good for Photoshop to fix this, I chatted with technical support and they have a new version of 13.1 to. I've updated, then went in the preferences and found the preference of the user interface, select 200%. Who did the trick.

• How to pass the user to the current provider 11.1.1.3?

  Hello
  After I connect to Smartview in Excel by using common provider 11.1.1.3, I seem not to be able to change my login ID. It always automatically connect me as my 1st login ID.
  How to pass the user to the current provider 11.1.1.3?

  Hello

  If you right-click on the essbase server and select "Invalider SSO" and then disconnect > commune of provider connection.
  When you connect again it should ask you your login information.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Please I can't change my email address for Windows Developer Preview... I tried to go to the user acct and change the credentials, but it does not solve

  When I installed Windows Developer Preview two days ago, I hastily added an email that was not common. They said I could change later. I went to windows live Essentials/Director and enacted a replacement acct win/live/hotmail and changed the address of electronic mail by default, but my computer continues to insist that I have connect and wants me to use the original yet? Please, I can't change the email address of systems... I tried to go to the user acct and change the credentials, but it does not solve >?

  Now, whenever I try to it is said I forgot to sign in. and fills in the wrong address and wants to give me the password but I sure can't find a code to go with this ACCT... wants the past for this account? sign in? IDK... Please help = |

  Thank you both... I had to reinstall the drive, also I have re-installed the vista I have to files, Shell said, it must use to install on a system. It works now. I was in contact with the forum Dev =.) see you soon

• How to help the user focus

  How to help the user focus

  Magnifier enlarges part of the screen. This is especially useful for viewing objects that are difficult to see. It is also useful for people who are generally difficult to see the screen.

• How to know the user is the call

  Hi all

  I development push a service Application in which the following requirement is that the push message should not be displayed when the user is in the call. How to detect the user wheather so busy on appeal?

  Please suggest me how to proceed.

  looking forward to responses CIHI to you guys.

  Thank you

  I thought you wanted to know if the user is on a call.  The code I gave you the will and sets the appropriate Boolean value.  Where and how you use it is up to you isn't it?

  I would have thought that the logic in your code to push would be simply

  If (! onCall) {}

  view

  }

• How to create the user account using the command?

  How to create the user account using the command?

  Open cmd as administrator, and then type the following commands one after the other

  NET user / add program mypassword
  net localgroup administrators program / add
  net share concfg * C:------/ grant: program, complete
  This will create a user account with the name "Program" and the password "MonMotpasse".

  You can create the user name and password of your choice.

• How to open the maintenance Manager to change the printer ink

  How to open the maintenance Manager to change the printer ink

  Do you mean physically change the ink cartridge?

  I would check with the manual that came with your printer.