Siri sends texts to null

Similar Questions

• Siri in him sending text with the value 'NULL '.

  When I say, "Siri, text my wife, 'X', ' Siri responds correctly,"here is your message to Jill: 'X'. "" "  "Ready to send it?"  I say 'Yes' and sends the message.  As soon as I get a text from my carrier saying the recipient of the message was invalid.  100% of the time, I see that Siri has sent a text with the value NULL.

  I tried to restart my phone.  I tried to remove and re-add my contacts.  Anyone else having this problem?  Someone knows how to solve?

  If it's by the carrier, you should contact them and see what they receive in return for their side. Ive had Siri send messages for me and I have never seen this one IOS.

• After that iOS 10 Upgrade, Siri can send text messages.

  I have an iPhone 6.  I have upgraded to iOS 10 (10.0.1) this morning.  Everything seems to work very well with the exception of Siri is unable to send text messages.  It was working fine before the upgrade.

  'Hey Siri' addresses.  I say to "send a message to Patti mobile xxxx."  Siri says and asks what I want to say.  I said the message.  It saves the message as usual and asks me if I want to send it.  I say 'yes '.  He says "your message has been sent.

  Then, I get an error message saying that the message could not send.  The message is then listed with a recipient of: _ $! < mobile >! $_ the message below is "Message send Failure."

  Any thoughts?  Thanks for your time.

  10 iOS update resets some parameters according to me.  It worked for me to go to Options - LTE data - cell - cell settings enable and toggle either 'Off' or 'Data Only'.  Texting non-Apple do not seem to work if "Voice & Data" is selected.

• How do you prevent Siri to send text messages?

  My children told me just show a problem with my iPhone 6 and Siri:

  My phone is locked, my child picks up the phone, press the home button and said "Send by David SMS", Siri let him write a voice message: "what is your social security number?   Siri sends, my other child shows me it seems I just send the message from my iPhone.

  David sends what looks like his social security number (it is not, we test all this), and the message appears on my locked iPhone.

  So if I left my phone sitting around, everyone could use Siri to do things like this for the information of anyone in my Contacts, even though I have a 6-digit code and fingerprints id put in place.

  What settings I need to change on my iPhone 6 to ensure that ever happening?

  Where they have found out about this: http://www.liveleak.com/view?i=c73_1475783202

  Post edited by: Phlac - add source my children found.

  Disable Siri "access on the lock screen.

  Settings > Siri

• Siri and texting

  Someone had problems with Siri and texting?  An example:

  Me: "Hey Siri, send a text to Janice"

  Siri: "what do you say to Janice.

  Me: "be there in 10.

  Siri: 'your message to Janice said, be there in 10. you want to send? »

  I said, 'send '.

  Siri: "I will send your message to Janice."

  Two minutes later, I see "failed to send Message."

  Then I see this: (and this is a list of contacts much there happens)

  

  Hello

  It may help to follow the steps detailed here:

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

• How doi send texts using the speech function without hitting the Send button?

  using the speech function in texting, how to send the text without actually pushing the Send button? When I say 'send' or 'send message' he just keeps typing

  "Hey, Siri, send a message to Bob. Siri will then ask you what you want text Bob. Once you stop dictating, Siri will ask then if you're ready to send the message. Say, "Yes." It's really very nice.

  If you are already in the message app and using speech-to-text, you must press the Send button.

• I can send text to a Droid for my IPhone 6 but not from my Mac or Ipad.

  I can send text to a Droid for my IPhone 6 but not from my Mac or Ipad.

  < re-titled by host >

  Looks like you need to set up the transfer on your iPhone text messages:

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > Send and receive. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and activate the device or devices that you want to transfer the messages.
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  See use of continuity to connect your iPhone, iPod touch and Mac - Apple Support

• Unable to send text to apple not from my ipad device

  can't send text to non apple devices

  message says: phone number is not registered with iMessage

  He worked before the last OS update

  On your iPhone, go to settings > Messages > text Message transfer and make sure your iPad is turned on.

• Cannot send texts

  I can't send texts from my phone Moto G 1st generation. I can't even meet one that I received. I get a message "send", but the text is never sent. After a while, I'll see the text displayed with a triangle and an explanation mark in the Center and my phone is my text and warns me I am waiting for messages.

  What app do you use? SMS are not like emails and a subject is not a normal part of a message.

  I suggest that you use the 'messages' or 'Messenger' of Google stock.

• My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

  My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

  Go to settings > Messages and make sure that iMessage is activated. iMessage will only send with other iOS devices. The iPhone will send SMS if you send to non - iOS devices. You must also make sure that you have given to lit and it is connected to the Wi - Fi or cellular data.

• BlackBerry Smartphones 9330 "SMS error 0, general problems. Can't send text messages

  My Blackberry 9330 cdma has been great work over the past 7 months.  From Friday 22 November, I can no longer send text messages.  I can receive texts, but every time I try to send a text I get the error message following the General problems""(SMS erreur 0, ID de Message XX). "

  I was using my phone as usual, sent the texts in the morning, but in the evening, I was unable to send a text with success to anyone.

  I have contacted my provider and they did not receive one of the error messages on the network, and there is no power outages in my area (I tried to send other areas of the city too).  I have pulled the battery to reset, deleted the data from the phone, reset all connections... all to nothing does not.  The issue seems to be with the blackberry.

  I'd appreciate any help or advice anyone can give me.

  Thank you

  It is usually a network problem if you have not any setting or update any software on the device. I contact your carrier and bring them to escalate your case through their support channels.

• Device of blackBerry Smartphones, sending text messages invisible to the unknown mobile number

  Hi, just bought a unlocked 9360, having a strange, new problem in Blackberry, so be, permissions or something, but the device sends texts to a number of mobile which is not in my repertoire, recent calls or texts. My allocation of text on O2 came down, I changed to a Giffgaff sim and who goes down also.

  I know that the phone number as Giffgaff sent me a list of numbers, the texts were out to and they are all the same one.

  Sorry to be a beginner, if it's as simple as the app permissions.

  Amanda

  Let's be clear. There are SMS messages are automatically sent from the device and you're not sending them? If this is the case, then now, follow these steps:

  Turn off the mobile network radio. Perform a full backup. Do a security wipe. When you do the wipe of security, check the box to delete applications.

  See http://www.blackberry.com/btsc/KB14058 about security wipe.

  After clearing security, do a selective restore of just your personal data. Do not restore settings or application data. But, if you can start from scratch and go do a restore, do.

  Go ahead: set a device password and lock your device when you have eyes on her. Don't lend your device. Don't let anyone use it. There is a setting in the options to require the device password in order to install an application. I recommend that you enable that. Finally, be careful what apps install.

  My best guess is that there is a malicious application on the device. Maybe it was when you bought it, maybe someone put there after you acquired it, or perhaps you have inadvertently installed. Cannot be sure. But obviously this is not something you want, at the very least, and you don't know what it is to delete.   This is my reason for the security wipe.

• Ability to send text messages to siebel

  Hello
  
  Is it possible to send text messages to mobile phones to users of siebel? ex... If a SR is created/closed/climbing.
  Is there a product Oracle support this? Or it can be integrated with an external mobile service provider? Is there a documentation on the specifications for integration with external mobile service provider?
  
  Please let us know your valuable contributions.
  
  Thank you and best regards,
  Deepak

  Deepak,

  See the document below:

  http://docs.Oracle.com/CD/E14004_01/books/CommSrvAdm/CommSrvAdm_Wireless.html#wp1263809

  It will be useful,

  Wilson

• Send text from versions cs4 CS3 - fonts and text not displayed

  I am trying to send text files (I use illustrator CS4) to someone with illustrator CS3. I save the files in CS3 format but the other person that is impossible to open the file, the file is empty or missing parts of text. (Files usually contain a mixture of fonts). When I send pictures they are usually ok.

  I would be very grateful for an answer to this problem because it's taking me to work.

  Simply the zip first.

  Mail servers do not like .ai or .eps files. They must always be zipped before emailing.

  Chances are this is the reason for which everything that you're having trouble. Looks like you save correctly and if you open the files and they seem to always correct, so email should be the question.

• OEM - java.lang.Exception: Exception by sending the request: null

  Hello
  
  I installed Oracle 10.2.0 on Windows Vista Home edition,
  OEM of opening the gettingthe error page - below
  
  Error
  
  java.lang.Exception: Exception by sending the request: null
  
  Database instance: orcl2
  
  After google and some search on the net, found a solution having an emd.properties of the modified files - agent TZ values must be changed.
  Changes of post too I still get the same error.
  Could someone help me in fixing this error of OEM.
  
  Rgds
  Jr. s/n

  Version
  -----------------
  10.2.0.1.0

  It is completely excluded.

  Oracle Database 10 g 2 (10.2.0.3) must be used to install the vista/2008 and, except Vista HOME edition.