How to write the 'C' alpabelt within a circle of author?
Hello
How to write the symbol of copyright on first Pro CC (ie the alpabelt 'C' inside a circle) ?
Thank you
On a Mac, Option + G.
MtD
Tags: Premiere
Similar Questions
-
Open XML, how to write the path
Hello
I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed using the desktop software. Now, I tried to put the file somewhere else on the Blackberry and I don't know how wirte the path to the source code. I tried the following, but it seems to be bad:
private static String _xmlFileName = "file:///store/home/user/documents/test.xml"; DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); InputStream inputStream = getClass().getResourceAsStream( _xmlFileName ); Document document = builder.parse( inputStream );
I hope you can give me a hint, how I write the correct path?
Thank you very much!
Best regards, jtr87
PS: Sorry for my bad English, but I did not use it very often.
You need to do something like that to get your InputStream:
/** * @return an open InputStream for a file, or null if file does not * exist. * @throws IOException if there is an error opening the file */InputStream getInputStream(String name) throws IOException { FileConnection fc = null; try { fc = (FileConnection) Connector.open(name, Connector.READ); if (fc.exists()) { return fc.openInputStream(); } } finally { if (fc != null) { try { fc.close(); } catch (Exception ignored) { } } } return null; }
Notice that you must close the FileConnection at some point, regardless of if the call to openInputStream worked.
-
How to write the script in FDMEE below.
How to write the script in FDMEE below.
Script below is the FDM Script.How write in FDMEE.
If (varValues (14) '113101' =) OR (varValues (14) '113201' =) OR (varValues (14) '113301' =) OR (varValues (14) = "252111") OR (varValues (14) '156101' =) then
Result = "21_asd."
Please help me on this issue.
Kind regards
Satheesh, S
If you want to determine the id of the target account your opening assignment statement must be:
Account = fdmRow.getString ("ACCOUNTX")
As if - elif-instructions else keep lowercase stream operators. If you continue a command on multiple lines, then place parentheses is
If (account == "113101") or (account == "113201") or (account == "113301") or (account == "113401") or (account == "113501") or (account == "113601") or (account == "215101") or (account == "215201") or (account == "215301") or (account == "215401") or (account == "215501") or (account == "215601") or (account == "252111") or (account == "156101"):
fdmResult = "21_ADNIP".
should be (also get rid of the unnecessary parentheses)
If (account is "113101" account is "113201" or account is '113301' account is "113401" or account is "113501" or account is "113601" or account is "215101" or account is "215201" or account is "215301" or account is "215401" or account is "215501" or account is "215601" or account is "252111" or account is "156101"):
fdmResult = "21_ADNIP".
-
How to write the even-odd fill feature?
How to write the even-odd fill feature?
Maybe like this:
app.executeMenuCommand ('* ');
There is a command in the PathItem object named evenodd. I think that if you change the property of evenodd and get a member of a composite path path, you can achieve a desired result.
-
Hello
How to write the sql query
I have three type of table as
1 table emp
EMP_ID FIRST_NAME DEPT_ID
---------- -------------------- ----------
1 kumar 10
2 sam 20
3 30 damu
2 table dept
EMP_ID SALE_ID DEPT_ID
---------- ---------- ----------
1 101 10
2 102 20
3 103 30
3. table sale
EMP_ID SALE_ID SALE_AMT
---------- ---------- ----------
1 101 7
2 102 8
3 103 9
I want the result as
EMP_ID DEPT_ID SALE_AMT
------- --------- - --------
1 10 7
Thank you
Are you looking for this?
SELECT T1. EMP_ID,
T1. DEPT_ID,
W3M SALE_AMT
FROM EMP T1,
SALE T3
WHERE T1. EMP_ID = T3. EMP_ID;
OUTPUT:
EMP_ID DEPT_ID SALE_AMT
------- ---------- ----------
1 10 7
2 20 8
3 30 9
If this is not the case, after the actual output, you need. Because that gives you the amount of sales deptwise
-
How to write the query option in expdp
Hi Please someone help me how to write the query option in expdp... .in expdp using the query option...
where AM columnname between 5 May 12 02:57:00.000' and ' 02:59:59.999 6 May 12: ';
Please do what is necessary...Pavan Kumar says:
QUERY = (columnname scott.test: "where between 5 May 12 02:57:00.000 h ' and ' 6 May 12 AM 02:59:59.999'")Who will fail in databases, because you assume nls_date_format. How it is difficult to put to_date() surround channels? Rather than play with quotation marks, using one parfile thusly.
query=table_owner.table_1:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')" query=table_owner.table_2:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')" query=table_owner.table_3:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
You do not have to have all the clauses in a single line, as they are side by side parfile, which would be enough. For this reason parfile is better than the command line in order to avoid all the back-citing dance.
-
How to write the select query for it
Hello
I had an html form and the area I drop down and he needs to select several values in the drop-down box. When I select multiple values then I have to write the query to SQL select statement.
When I try to write the select statement and trying to run I get the error message.
Select * from Table
where emo_no = '1,2,3 '.
That's how I write the query please suggest me how to write the query to select several values in the drop-down box.
Thank you
Use the keyword sql 'in '. If you don't know how, I've heard good things about the book Teach Yourself SQL in 10 Minutes by Ben Forta.
-
How to write the text file in Shockwave?
Someone knows how to write the text file in Shockwave on the disc of the user?
Thanks in advance.These Xtras can cause a lot of havoc when used with the intent to hurt.
What you can do is to write with setpref and store a list of backups and the
registers itself separately. Next, you need to build your own save/open
dialog box for the user:
* Choose a previously saved file to load or replace
to create a user type the name of a new file to be saved.The only thing that remains is that the user can't decide where files
are saved.Manno
SiuLinda wrote:
> Thanks a lot for your answer.
> Yes, cookies is good, but I have to write a program to save the text file in
> When the user wants, the user can open these files later if they like as, using
> Filextra and Fileio, but I found that all these Xtra extensions seem to be not supported by
> shockwave.
>--
----------
Manno Bult
[email protected] -
How to write the xml content of a file (Blob data Type) with other columns in file system
Team,
We are currently working on oracle 11 g. Suppose that we consider the SCOTT. EMP table for our creation of the table.
All existing columns of SCOTT along. EMP table allows to assume that this table has an additional column name emp_xml, which is of TYpe of BLOB data and it holds xml data.
the size of the data blob for each record in this col is greater than 32 KB (normally about 1 GB), now I want to write the contents of this column along
with enmae, empno, hiredate into an external file. Assume that if we are only to the BLOB column that is emp_xml then the code below worksStart
for c in (select emp_xml from your_table)
loop
dbms_xslprocessor.clob2file (emp_xml.getclobval (), 'YOUR_LOCATION', 'YOUR_DYNAMIC_FILENAME')
end loop;
end;but I want empno, enmae, hiredate with blob emp_xml written in the external file. Any assistance in this case welcome.
Concerning
max_linesize
Maximum number of characters for each line, including the newline character,
for this file (minimum 1, maximum value 32767). If not specified, Oracle
provides a default value of 1024.Defines how much you can read or write to a single call. I have to loop through the clob object and I write a pieces of 1024. So there is no limit to how much she can write. Just test it, IT will WORK!
-
How to write the condition with the value of the parameter
Hello
I'm working on siebel BI publisher report. I am able to display the value of the parameter in the report.
Now, I wanted to do something logical based on the value of the parameter.
for example: If the user changes the value of the parameter then I have to call A submodel if user don't past not any value then it should not display A submodel
can someone tell me how to write that above logic?
If the parameter exists then MODEL of APPEAL one another do not call MODEL A
Kind regards
JAG
Dial a submodel
-
How to write the function for bottom of logic...
I have a picture in the picture I have a records like below
code value
1 20
2 null
3 30
4 null
5 40
6 null
The output need to have the values displayed in the fields first, followed by the NULL values as below
code value
1 20
2 30
3 40
4 null
5 null
6 null
I think the suspicion is that the values must be concatenated with the replacement of NULL values with (;).
as
20, 30, 40
Get single values and insert into the table...
for this I don't know how to write function for who can please help me on these...
Published by: Claudia on June 22, 2011 22:45
Published by: Claudia on June 22, 2011 22:51Create or replace function test_fun
is
cursor fun1 is the value select from table by CSA 2;-"this select query will return 20,30,40, null, null, null".
v_out varchar2 (20);
Start
fun1 open cursor;
loop
extract the fun1 in v_out;
dbms_output.put_line (v_out); - this is the command display output on the screen.
output when fun1 not found %;
end loop;
close;
end;Please try it and tell us if no query...
Thank you
IQ -
How to write the sql command in the batch file
Jin
I m using oracle 9i on windows. I want to know how I can write the sql on the command file command. I want to use a batch file to use the sql like shutdowm command & start command and any select command too.
so please tell how can I do?
thxsTried looking for what he superdba.
Can't connect to sqlplus using sys using a batch file
HTH
Aman... -
Hi guys, I wonder how proceed in Disco Desktop (not admin). How to write exists it as a statement in 'where close.
Select * from EMP
where exists (select 'x' emp_1
where emp_1.sal > 2999
and empno = emp.empno)
I thank in advance.Hello
In order to use a subquery in a condition there must be already an existing worksheet in the workbook. If you do not have an existing worksheet, and then you will always see the ability to create subqueries, but you won't be able to use it.Here's a workflow to try using SYSDATE:
1. first of all, make sure you open the Desktop, not more.
2. create a new spreadsheet table containing only a calculation, SYSDATE - do you this by clicking on continually Next until you reach step 6 of the wizard, by ignoring the message that says that you have no items in the worksheet
3. in step 6, click on the new button
4 let the name of calculation as Calculation0 and add SYSDATE in computing
5. click on the OK button
6. click on the Finish button - you now have the current date in your worksheet
7. in the menu bar, select sheet | New leaf and select the Table
8. once more constantly click Next until you reach step 6 of the wizard, and ignore the message that says that you have no items in the worksheet
9. in step 6, click on the new button
10 let the name of calculation as Calculation1 and once more add SYSDATE in computing
11. click on the OK button
12. click on the Finish button - you now have the current date in your second worksheet
13 remain in the second worksheet, in the menu bar select Tools | Conditions
14. click on the button new to create a new condition
15. in article , use drop down the menu and select Calculation1
16. under the dropdown value (s) , you should see create subquery
17 notice how discoverer has automatically selected Calculation0? It is the only element so naturally it will be selected. However, if you have more that one discoverer selects an item of the same type of data
18. nothing to except click the OK button a few times nowWhat you have done is said that the SYSDATE in worksheet2 depends on the formula in Sheet1, which is also be SYSDATE.
To prove that this work, go back to the worksheet sheet1, change the formula of SYSDATE -1before returning to sheet 2 and then refresh it. This time, you should get no returned data showing that the subquery works.
Moreover, any leaves that you create in Desktop using subqueries will still work even if you cannot change the subquery itself and more.
Best wishes
Michael -
How to write the comma delimited numbers of configuration file
Hello
In the attached Configuration File.vi write, I am trying to crush several whole decimal in the keys 1 and 2 of the attachment Test.ini. I am to convert the array of integers in a string. Because of this, the string written in the ini file is now being bracketed by apostrophes. What should I do to write the string without the apostrophes, as in the Test old.ini file?
I appreciate your help. Thank you.
Best regards
Peter
See here:
-
How to write the trigger for update or delete multiple columns in a table?
Hello
I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.
Header 1 Header 2 Header 3 Header 4 Header 5 Heading 6 Heading 7 8 header Header 9 EMP_ID EMP_NAME DESIGNATION TEAM_ID TEAM_LEADER_ID EMPLOYEE MANAGER_ID HIRE_DATE RELIEVED_DATE --
Thank you.
Hi Joel,.
Venky_prs wrote:
Hello
I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.
Header 1 Header 2 Header 3 Header 4 Header 5 Heading 6 Heading 7 8 header Header 9 EMP_ID EMP_NAME DESIGNATION TEAM_ID TEAM_LEADER_ID EMPLOYEE MANAGER_ID HIRE_DATE RELIEVED_DATE --
Thank you.
You can try something like this given below to complete the historical table on update and delete.
create or replace TRIGGER "CLONE_EMP_UPDATE_DELETE" BEFORE DELETE OR UPDATE ON EMP FOR EACH ROW DECLARE PRAGMA autonomous_transaction; BEGIN INSERT INTO JOB_HISTORY("EMP_ID","EMP_NAME","DESIGNATION","TEAM_ID","TEAM_LEADER_ID","SUPERVISOR_ID","MANAGER_ID" ,"HIRE_DATE","RELIEVED_DATE") VALUES(:OLD.EMP_ID,:OLD.EMP_NAME,:OLD.DESIGNATION,:OLD.TEAM_ID,:OLD.TEAM_LEADER_ID,:OLD.SUPERVISOR_ID, :OLD.MANAGER_ID,:OLD.HIRE_DATE, :OLD.RELIEVED_DATE); COMMIT; END;
Hope this helps you,
Kind regards
Jitendra
Maybe you are looking for
-
I tried to search for reset addon and nothing has changed. It also seems that Firefox change my settings as homepage and the size of the police. I'm not very tech savvy. Mac Mini running Yosemite 10.10.2 Thank you
-
HP Pavilion all 8 compatible 64-bit Windows developers?
I already have 5 months 8 developers 64-bit Windows installed on my HP Pavilion a1585l. I upgraded to 2 GB of RAM 4 years ago. He works very well with different OS. The problem is that the original drivers are for older OS like Windows XP. So if I wa
-
I downloaded some Mods for a statergy game but they downloaded in temporary files.
I downloaded some Mods for a statergy game but they downloaded in temporary files. I don't know how to access temporary files. Also, if I can (with your help) get files Temp, how can I move them to my C; Reader & open them? I am using a XP. Thanks in
-
Cannot close a message not sent with 210 MB attachment which, for a week, trying to send
How close or cancel an email went out with 210 MB photo attachment that I can't delete?
-
phtosmart C5240 all-in-one will not use the cd/dvd tray to print
OK, so I use essential 3.5 photo to print directly on printable CD. Whenever I try to print, the printer tells me to close the CD/DVD tray, but when I do that, it starts printing the status bar with plain paper. Any suggestions? Also connected to the