How we cal the repository variable in static mode

Similar Questions

• How to use the repository Variable title

  Hi all
  
  I'm new to Obiee. I have a requirement, I want to show variable repository in title.
  Please help me
  
  Thank you...

  Hello

  In the legend of view title write as follows

  @{biServer.variables ['NQ_SESSION.variablename']}

  For more details abt this link below, you will find the table of variables

  Concerning

  NGO

• How to use the global variable in the table target?

  Hello

  I am trying to load several files into a single interface. the data is loaded successfully. 92. the files are there. for this I used variables and package.

  My requrement is 92 files of data loaded into the target table. I want to know what data from file.

  to this I added a column (filename) to the existing target table.

  If I used joints (not same condition), its totally wrong. all file names are coming.

  Please see the following screenshots.

  

  exit; target table.

  

  in fact in the target table. first 10 lines are coming from file.i.e first _ACCOUNT_LIMIT_511.TXT. but all the files names are coming.

  I'm confuse. After the first data file inserted then insert second data file. in that all file names are coming. Please help me.

  I thought that the global variable is preferable to identify the data came from which file.

  to do this, the global variable is used in the target table. I don't always have my exit.

  Please help me.

  Thanks in advance.

  

  Hello

  You can use the same way, how you use the project variable, just you have to do a thin is #GLOBAL.variable_name for example: #GLOBAL. SMART_AL_FILE_NAME_S

  Note: Make sure you that while you use one variable overall in interface, indicator should be staged as you chose above the screen

  hope this helps you

  Kind regards

  Phanikanth

• How to remove the repository 11g CAD

  Hi gurus,

  I did a new DAC 11 g install and after that, I realized that I have to install DCA 10 g and then switch to the DAC 11 g, but now I am not able to connect to the DAC as it says.

  FAULT INFO: QServer stops because of the incompatibility of version of repository: repository you connect to

  is an incompatible version. The system shuts down.

  MESSAGE: the repository, you connect to

  is an incompatible version. The system shuts down.

  EXCEPTION CLASS: com.siebel.etl.upgrade1.VersionMismatchException

  Now how to remove the repository of 11g CAD already created on the side of the database so that while you connecting via DAC 10g, it creates the repository again and I can do a upgrade/fusion.

  Thank you

  Amit

  Hey Chick,

  I am not able to connect to the DAC, it throws me error

  The repository to which you are connecting

  is an incompatible version. The system shuts down.

  How to remove the repository of 11g CAD without connecting.

  Thank you

  Amit

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• How to change the format of text ticker mode?

  Hi all
  
  How to change the format of text ticker mode?
  
  Thank you

  Hello

  If you want to format the ticker together with particular format then put in the start text
  before the tag Table
  put the fonts with necessary attributes tag
  

  In the end after the tag text table

  Close the tag are

  Thank you
  Vino

  Published by: Vinodh NK on March 18, 2010 04:36

  Published by: Vinodh NK on March 18, 2010 04:36

• How to get the secondary variable

  Hello

  Can I know how to get the variable of the Secondary VI?

  Please see my VI, when I run the test in high school, I can't any variable in the indicator "get all the control values.

  Is there a wrong?

  Thank you.

  Try this:

• How to reset the repository OBIEE 11 password?

  Hello world

  I can't be the only one never to deal with this issue! In OBIEE 11 g (11.1.1.7.0), I forgot the password for the repository. So not able to connect to the repository. So, how can I change the password for the repository?

  I hope you can help me on this pickle!

  Irene

  I hope that under the will of useful link to you

  How to reset forgotten OBIEE 11G RPD password? OBIEE by Shiva Molabanti

• The use of the repository variable date in filter expression

  Hi gurus

  I get the error using repository variable date in filter expression. I use the formula below

  filter (with the HELP of Fact.calls"Sun Time".) ("' Fiscal months end date" = VALUEOF ("month_start"))

  I am getting below error

  The formula syntax is not valid.
  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 22024] A comparison is performed between incompatible types. (HY000)
  Publ. SQL: SELECT filter (fact. Calls by using "Sun Time" ". Fiscal months end date"= VALUEOF ("month_start")) 'call DATA.

  Then I tried the below format I still get the error

  filter (with the HELP of Fact.calls"Sun Time".) "" Fiscal month end date "= DATE'(VALUEOF ("month_start"))") "

  The formula syntax is not valid.

  [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 46047] DateTime (VALUEOF("month_start")) (VALUEOF("month_start")) value does not match the specified format. (HY000)

  Publ. SQL: SELECT filter (using "Sun Time" Fact.Calls. ("' Fiscal months end date" = DATE '(VALUEOF ("month_start"))') 'call DATA.

  Please let me know what I'm missing or what is the correct syntax of same using the repository of date variable.

  Thanks in advance

  Concerning

  @li

  filter (with the HELP of Fact.calls"Sun Time".) ("' Fiscal months end Date" = CAST (VALUEOF ("month_start") date))

  Try this

  mark, if this can help

• How to check the Session Variables using the analytical web dashboard

  This is my first post. Easy points to the first right answer... If I can figure out how to give points.
  
  Problem: I need to know how to check that the Session Variables with the Administration of Oracle BI tool are used by the web analytics tool.
  
  Environment: Windows running Oracle 10g BI. Connect to the database using web analytics http:// < server >: 9704/analytics, web analytics is running in a windows Explorer browser.
  
  Current situation: the analytical tool is connected to the database and I can use the screen of "Answers" to the table edge to probe the tables look and things as expected.
  In the administration Oracle BI tool I can see the session of web analytics and I see that he thinks that the Session Variables are set correctly.
  I have reasons to doubt that the analytical tool is to get the right variables and I need to check it out.
  I know that I should use the 'Answer' window to create a shape any of a query that includes NQ_SESSION. < my variable >, but I can't understand what the format should be doing the work.
  
  That's all I need.

  What I do is insert a text in my dashboard object and then set the properties of the text object to display the variable.

  for example to display the DISPLAYNAME variable, the text object properties are:

  User: @{biServer.variables ['NQ_SESSION.]} {[DISPLAYNAME']}

• How to change the constant variable rate?

  Hello

  I export an HDV mpeg file that has a constant rate of a video H264 (.mp4) video for download on a web-based video player. I actually use the preset in Media Encoder 'YouTube HD 720 p 29.97'.

  The web interface of video online that I use requires a constant rate. But when you look at the video in MediaInfo it shows the video file as a variable rate. After looking through the settings in Media Encoder I found no option to fix this.  I see where you can change the frame rate and it is 29.97. So you might think, it would be constant but is not. And there is not any settings, I see, to change the constant variable. I don't see the flow settings, but this isn't the issue.

  I also have Apple Compressor and making a successful rate constant, but if possible I prefer to use Adobe Media Encoder. If anyone knows how to change this setting? Thank you

  Hi CLCTV,

  To close this thread, interpreted as variable rate exports are now interpreted as constant in the CC SOUL 2014 (8,0) and later. Please create a new thread if you are still having trouble with this problem.

  Thank you

  Kevin

• How to pass the global variable...

  Hello
  
  I have a report in a page and form in another page...
  
  If I clicked on the icon change in the report page it navigates to the form in another page...
  
  In this im report have "bill_amount" as one of the column, if I clicked on the icon change report page means, it will go to the form in another page...
  
  This form consist of one text field which is "bill_amount"...
  
  Since the report that I bill_amount for each entry, if I clicked on the icon change the means of the respective row, it does not appear automatically the respective bill_amount in the text in the form field...
  
  I created a report separately on the sql_query table... I created a form with a single field 'bill_amount '...
  
  Given that I na not create a report and a form based on the table... If I have created as it means if I clicked on the icon change it will show the datas respective in the form... since I created a report and form separately...
  
  If it is possible to create a global variable... who will bring the value of the "invoice amount" in the relationship and you will go the respective value in the form field on the next page...
  
  I don't want to put the value in the form field by restricting by request... She must take through the global variable...
  
  How can I reach it...
  
  It is urgent...
  
  concerning
  Mini

  Hello

  In her edit link column u give, the respective form field name, and the name of the column in the report inside...

  So that the value in the report of the corresponding column will be inserted into the corresponding field in the form...

  (IE) like this

  > p1_item_name---> #corresponding report name column #.

  Concerning
  GTA...

• How to run the repository creation utility (11.1.1.3.3)

  Hi experts, I downloaded utility creation (11.1.1.3.3) at oracle.com repository as I was told to run it before installing Oracle Business Intelligence, v. 11.1.1.3.0, I already unzipped the UCR, my problem is I do not know where and what run.i I ask the name of the file to be executed, the location of this file because there are so many issues after having unpacked the downloaded file. Finally, how to run the file (for example by double-clicking). Thank you

  Visit this link,

  http://obiee101.blogspot.com/2010/08/obiee11g-installation-on-32-bits-XP-Pro.html

  He noted the location of the controls on the remote file, double click will start the process.

  Thank you
  Vino

• How to get the global variable for an instanceId

  Hello
  
  I have data in global variables of an instance level. And using that instanceId, how can I get the global-level variables data.
  
  Please me tips
  
  
  Thank you
  Sailendra

  Hello
  I guess you want to get the value of the external variable within the process. You can do like this:

  assuming that it is of type string. For other types of type cast properly...
  String extVarValue = (String) (New Component(instance: this)).get(attribute: extVarName);

  Replace "extVarName" with your project name. It returns the value of your project for the instance that you are currently working.

  -Thank you,
  Malar.