HP a1250n, radeon xpress 200 question after replacing the CPU, Standard VGA Graphics goes not down

Similar Questions

• High temperature after replacing the CPU T2500-> T7200 at T60

  After replacing the T2500 CPU temperature CPU T7200 varies from 70 to 85. It seems high, I think about the replacement of the thermal grease or thermal paste application. What could be better? To finish with the original grey Ribbon and fix a new radiator or better coat of toothpaste?

  orion9727 wrote:
  There was a test done and toothpaste is out near dough more themal.
  Artic 5 should never be used in a laptop.
  He money and this is a no no on mobile cpu.
  Use a no driver or a thermal buffer.

  the gray Ribbon is a preferable themal pad use this WHICH CAME into IT.
  Because maybe a wedge and to finish with this and without contact.

  you upgraded from a 31 to 34 watt TDP watt not much, but he's going to run hot.
  75-80 c is hot Yes, but you have class 65nm cpu will run hot because it is old and a lot of work.
  If you all know toothpaste can served in the tests but I have not use because it can dry out and not sure what exacly.
  heat wise, I do belive in toothpaste is wise very good heat but stick with the gray Ribbon.

  Please do not take into account the (re) post above.

  I used AS5 on thousands of ThinkPads with no ill effects, in fact the opposite. Research experiences minimal posted by other owners on Bill Morrow ThinkPad Forum will confirm this statement as well. Arctic Silver is as good as it gets unless you want to spend $50 for a tube of thermal paste.

  To OP, your machine is running too hot for the processor in question. My 15 "T60p with T7600 is inactive at least 50 degrees C and does no more than 62 in normal use. And Yes, it was AS5 inside.

• After replacing the CPU, I can't start my Satellite S1400-553 s

  Hello

  I opened my Toshiba laptop to replace the CPU a newer version, among other items recovered another satellite, when I replaced the and closed it up that I do not have to be initialized now.

  When I press on the power button the floppy drive makes a noise for a second slot and turns off again and the yellow power LED cable lights.

  I put back the original parts in the machine, but I still have the problem.

  Any idea of what s upward?

  Thank you
  Rob

  Hello Rob

  I agree with Johnny. You have probably damaged the mainboard. Replacement of the CPU part of the very sensitive laptop and most people make mistake and CPU burn out. You are a technician or is the replacement of material your hobby?

• Restore questions after replacing the hard drive

  I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

  Hello

   
  Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved
  
  You can check out the link and check if it helps:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
  If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also check out the link:

  Recovering your files in Windows 7
  http://blogs.technet.com/b/filecab/archive/2009/11/12/recovering-your-files-in-Windows-7.aspx

   

• Value of the element after replacing the automated process of line does not?

  Greetings!

  I have a standard process of line automated filling in the fields on my current form after the header. Certain values that I need to replace by calculations from the data in other tables. If right after the line, I inserted another process for this. The results are actually stored in the database, but does not reach the customer. Why? Somehow it seems, once the line is completed, the html elements are not affected more during the processing of the page.

  So I resolved to set certain values with a call ajax after the page is loaded, but which actually is not the best way to do this.

  In coordination with the question: what is the difference between the headings of before and after? I looked in the documentation, but wrong in details. Myself I havn't found no difference between the two.

  I hope you can help me get clarity on who and how to implement the calculation as well as the shape of line.

  Thanks a lot and best regards,

  Tobi

  Hi TobiP,

  If your item has as the Type of Source database column, and I think you do since your using an automatic process of line Fetch, in the properties of the element, you'll find a region called 'Source '. If the Source value or expression is not null and the Source is set to "Always replace the value that exists in the session state", then the value of the source will be taken from what you put as the source and ignore session state values defined by other processes. Assign to this "only when there is zero current value in session state" to use the session as a source value.

  Kind regards

  Joni

• Satellite L500 is not start after replacing the CPU fan

  Hi guys, I just replaced my cpu fan because the former was noisy and only working at half speed, I also had a couple of farm of downs due to overheating. The day that I removed the old fan the laptop was working fine and I stopped via the Start button and disconnected power and all the other wires.

  I installed the new fan today, put everything, plugged in the power cable, power led ok, ok... hold the power button led charge, led came to start on, turning on the fan, no hard drive does not display goes out again in 20 seconds, only power led and led load display.

  Unplugged all, disasembled and checked all my connections were ok, tried, always the same problem, checked the fleas memory sharp and even cleaned for hard drive always the same problem...
  Anyone out there who can help me please...?

  Best regards, Hans

  Did you remove the CPU or have you checked if its places correctly?
  Have you added the cooling grease after removing the cooling module?
  Hmm, but it looks like a little you damaged the Council why disassemble unit.

• Is it possible to adjust the CPU fan after replacing the CPU - Satellite L35 - S21?

  I have a Toshiba Satellite L35-S2161. It was initially equipped with a Celeron M 410. Last weekend, I replaced the Celeron with a Pentium Core Duo T2250. Everything works fine. Now, both the Celeron and Pentium seem to run a bit hot.

  The beach of temp for both are exactly the same. Honer time between Celcius 55 to 62 degrees Celsius.

  Is it possible to set the fan to maintain a temperature between 50 to 55 degrees? If so, how?

  Check this http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

  -It is uncertain whether the new processor is compatible to the system board. Integrated chipsets can take charge of their technical specifications a wide range of processors, but this does not mean that all types of CPU can be used in a mobile system for * integrated cooling systems are designed individually for each set of model in order to ensure the optimal functioning of the machine *. An incorrect CPU can cause the system to overheat and damage the internal system components.

  -In most cases, the BIOS does not work with the replaced CPU which causes a malfunction of the machine. The BIOS needs to be rewritten after each Exchange of a CPU that can only be done by an authorized Toshiba service partner.

• How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

  My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

  Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

  Once you have the disks, install in the usual way.

  Tom Ferguson

• PC restarts showing a blue screen and ATI RADEON XPRESS 200 graphics works only with WINDOWS 7

  (1) I have a motherboard integrated ATI RADEON XPRESS 200 SERIES
  I installed the 64-bit windows 7 but everytime I use, it shows a
  BLUE SCREEN and instantly gets restarted.

  ERROR INFORMATION
  
  Problem event name: BlueScreen the system Version: 6.1.7600.2.0.0.256.1
  Locale ID: 16393 BCCode: 1 BCP1: FFFFFFFFC0000005 BCP2: FFFFF960000D69EA BCP3: 0000000000000000 BCP4: 0000000000000000
  OS version: 6_1_7600 Service Pack: 0_0 product: 256_1

  Pls explain why this happens n solution for this?
  
  (2) I downloaded the latest updates for microsoft video card, but they are in the form of files * .cab, can someone explain how to install them.

  With the Xpress 200 integrated graphics, you will not be able to get Aero or other effects of Windows 7.

  You can adapt a motherboard graphics card: AGP or PCI-E slot there. A Radeon 3400 or other card compatible Windows 7 can be pretty cheap and would provide Aero and other effects of Windows 7.

• ATI radeon xpress 200 - a1350n - AmberineM-GL6E - share more memory video

  Hi guys my question is easy to explain... I guess the title says it all...

  .....

  I have an old PC HP a1350n that came from the factory with a card mother AmberineM-GL6E and ATI Radeon Xpress 200 as integrated video card.

  Well, my problem here.

  Like I said:

  HP Pavilion Media Center a1350n desktop PC

  AmberineM-GL6E< i="" guess="" is="" from="" asus="" i'm="" not="">

  BIOS version: 3.01< i="" remember="" that="" was="" the="" original="" verios="" of="" the="" bios="" before="" i="" upgraded="" to="">

  Video integrate Chip: ATI Radeon Xpress 200< actualy="" is="" at="" 64="" of="" memory="" shared="" with="" 1gb="">

  My problem is that now my PC has 2 GB of installed ram (2x1GB) and always has 64 MB shared memory...

  Before I updated the bios to 3.15 the option in the Bios that allows you to change the size of the memory could be changed, but now after the upgrade is not possible and with grey letters.

  How can I fix?

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=bph04502#N296

  It is a link that explains some of what I try to explain...

  Also... I have the same problem with another PC (a1450n), but this came with an nvidia chip...

  ... so no idea what can do? to share more memory for the video chip?

  Or should I get the BIOS? (where can I faund drop to do?)

  Note:

  I forgot to say, that in version 3.01, I could share to 256 MB and which was then my PC have had only 1 GB of RAM (2 x 512) which, in the case of the a1350n with radeon express 200

  But in the case of a1450n, I got 126MB with 512 MB of RAM (2 x 256) even at 3.01 version 3.11 BIOS... but now I can't do that... also the option disappeared o.0? WT@$%# !!!

  Unless you saved the BIOS ROM file before you upgrade maybe isn't you luck. Since you ask about it, you have not.

  The original BIOS is not available on the web portal of support for such an old desktop PC.

  You can, if you are willing to take the risk, go on the forums of mod BIOS to get a utility that can return this function to your option of the BIOS screen.  Forums Mod BIOS should have what you need.

• Memory size incorrect notification in Windows XP for ATI Radeon Xpress 200 M

  I have a problem that keeps buging me:

  The thing is that I have a laptop Toshiba Satellite L20-181, with an ATI Radeon Xpress 200 M graphics card, which, on the toshiba site is specified to support up to 128 MB. After that I tried to configure the size of the memory for the graphics card in the BIOS, to a precise value, Windows Xp is not displayed correctly this amount of memory. I think that the graphics card has another source of memory, DDR2 RAM memory, but I'm not sure.
  Initially, I had a 256 DDR2 dim. After configuring the Ati card for a value of 32 or 64 in Bios, entering into Win XP, it displays a value of 128 MB SGDDR.
  Then I bought another 256 dim (I have 2 x 256 ddr2 dims now), and an additional value of 128 appeared in the BIOS. When you now set the value 32, Win XP shows me 128 MB SGDDR, and when you set the value of 64 or 128 I get 256 MB SGDDR in Win XP (which is impossible! because the ATI Board is supposed to support only up to 128 MB). This problem can also be caused by the driver. I installed the drivers from the CD of Toshiba, and I can't find another driver to work for her. WHAT CAN I DO TO MAKE WIN XP SHOW THE CORRECT VALUE FOR THE MEMORY OF THE GRAPHICS CARD? s ' Please help!

  Hello

  As far as I know you can change the size of the UMA (default) 32 MB maximum. 128 MB.
  This value, which you can change in the BIOS. I put t know where look you good value, but you should start to DirectX. Command: dxdiag.
  Here, you can do any graphics test and you can see the total graphics memory

  Good bye

• Mandriva Live and Mandriva 2006 or Ati Radeon Xpress 200 M graphics card

  After installing Kubuntu, wich works nice on my L20-155, I want to try to install Mandriva 2006 or Live of Mandriva.
  The problem is the graphics card (ATI Radeon Xpress 200 M). With which the map is compatible.
  In the settings I have test VESA-VGA-sVGA, but no luke.
  If someone had more luck
  thankssofar

  Hello

  Have you checked the page Web ATI for Linux drivers?
  Try google a bit in Linux forums.

  PS: I found this site to info Linux on the Toshiba page:
  http://newsletter.toshiba-tro.de/main/
  Here, you can compare a configuration and compatibility options.

  But you must know that Toshiba supports only the Microsoft OS, and there is no guarantee that the various Linux distributions will work properly

• Why ATI radeon xpress 200 does not support windows 7?

  I have 1 GB of ram and Intel 3.00 GHZ and ATI RADEON XPRESS 200 processor on the graphics card. The graphics are very low resolution after installing windows 7, and when I tried to install the graphics drivers of my motherboard CD, windows displays the message "WINDOWS DRIVERS FOUND, BUT YOUR SYSTEM DO NOT SUPPORTED.".
  I have searched on the discussion and found it does not support my graphics card. So, if I have installed another (say nvidea 512 MB) graphics card it will then support windows 7?

  Depends on if you have a laptop, if so you can not move the graphics.

  If a desktop computer you buy a graphics card that supports supported win7 and for example the type of connection your motherboard has PCI or AGP

  The IMO 1 GB of ram is much too low for win7, you should watch 4 GB (if your system supports)

• ATI Radeon Xpress 200 series problem

  I have recently updated from Windows XP to Windows 7. On the one hand, everything is going well except that my ATI Radeon XPress 200 series is no longer able to update. I called ATI and AMD both talk to technicians to see if missed me something or possible solutions to my problem. These last two simply replied with "chipset is too old and is no longer supported", has then hurry the phone is off. Now, I know that my laptop is not the newest or the fastest, but the cchipset was very good before, so I know it works, so I can find a driver for concentrated there. Here are my questions to someone who can help:

  Is there a Windows 7 (Vista) driver for this chipset? Y at - it an alternate option to make the driver work for this chipset? Or is it just the time to invest in a new PC or laptop?

  Here is more information, if it helps:

  HP Pavilion dv8110us laptop

  Windows 7 Ultimate 64-bit (Service Pack 1)

  AMD Turion 64 Mobile Tech 1.80 ML - 32 GHz

  2 GB of system memory

  ATI Radeon Xpress 200 m series integrated chipset (driver dated date: 24/11/2006 driver version: 8.31.100.32)

  Thanks to all in advance, any help is greatly appreciated.

  See http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_vista64.aspx?type=2.4.1&product=2.4.1.3.13&lang=English.

  The Xpress 200 is not supported for Windows 7.

• SatellIte A100-220 - ATI Radeon Xpress 200 M Driver update

  Hello

  I have a laptop Toshiba SatellIte A100-220 and I can't find the latest driver for Ati Radeon Xpress 200 M, could you help me?

  Thank you in advance.

  What operating system do you use?

  I guess you know that you must use drivers from Toshiba support page. Have you already checked last version here?