HP Desk Jet 722C - pilot of need to use the Windows 7 operating system

Similar Questions

• need to link to get the driver for my compaq presario pc, reinstalled using the windows xp operating system

  someone sent me information to try to fix my cd/dvd doesn't work do not and after that following the steps, it is still not work.i said, maybe I need to reinstall the driver if someone can send me the link to microsoft so I can get the driver for reinstall-thank you

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  3. What is the number of the model of the computer?

  Method 1:

  I suggest you follow the link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  I suggest you to install the drivers from the manufacture of the product and check.

  http://www.Compaq.com/country/cpq_support.html

• need of five advantages and disadvantages of the windows 2000 operating system

  I'm looking for five the advantages and disadvantages of windows 2000 for my children ok operating system

  I can't get to five of each, but...

  Windows 2000 has been designed more as an OS company than a House, so should be the characteristics that probably would not need a home user. Plus it's really, REALLY old that dare go, and there is no support for it (end of July 2010). There is not much more for new audio and video devices driver support. It is not really designed for the game, if that's what they have to.

  You do not mention their age and what level of expertise they have. Don't forget that with EOS, there is no update security more released for it.

  SC Tom

• ThinkPad E530: Need help using the Windows 7 recovery partition

  
  

  Nice day.

  Everything I've read, so far, is that it is not possible to do something with the remnants of the recovery partition now that Windows 10 'touched' the system.

  A way to return to your original OEM image would be to contact the applicant recovery DVD and Support (info below). There may be a cost of handling.

  Kind regards.

• How can I load updates from pilot to another pc using the ethernet cable?

  How can I load updates from pilot to another pc using the ethernet cable?

  You would be better to use a flashdrive rather than an Ethernet cable. To connect using an Ethernet cable you need a crossover cable and then configure the network cards.

  I hope this helps.

• W530 need to use the external monitor as the main

  I have a training environment with the help of portable computers W530, who are locked in a box in front of the offices. It is not practical to reach the computer as it's hidden and so I need to use the dvi cable external monitor for the configuration of the bios, boot order, etc..

  Currently, boot options are hidden from the external screen until windows loads. The external monitor would then become active. A way around the monitor to the laptop altogether?

  Thank you

  Russ

  VGA is driven by Nvidia, so apply the same parameters. Comes to the boot monitor in VGA BIOS (I forgot what we call this specific setting, as my W530 is at home). You should always pass nvidia Optimus only.

• I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  A / installation ADK

  I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  Hello

  To improve assistance to this subject, you can ask your question in the technet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• do I need to use the product for the management of the recovery key to refresh the window 8.1?

  do I need to use the product for the management of the recovery key to refresh the window 8.1?

  No, the product key will be automatically read from the BIOS.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• I need to use the device of the CVI drivers in VC ++

  I need to use the Labwindows/CVI driver in VC ++. It gives me error linker outstanding. I built a file lib Measurement Studio, but it seems that the CVI files was not included. but when I try, what libraries I should include in my Visual Studio

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol _Scan unresolved external

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol _CVI_OpenFile@16 unresolved external

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol _CVI_CloseFile@4 unresolved external

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol _ScanFile unresolved external

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol external science pending

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol _FmtFile unresolved external

  1 > MHD_hp859xe.lib (hp859xe_mhd.obj): error LNK2001: symbol external _NumFmtdBytes @ pending

  LabWindows/CVI evaluation Version Limitations answers your questions.  More details are available in the LabWindows/CVI Assessment Guide.

• I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system.

  I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system or compatible driver.

  Hello.

  According to HP, they offer no drivers for Windows 7, but in many cases the driver for Vista works on Win 7, then you can try this. If you have 64-bit Windows 7, then download Vista(64-bit), if you have 32-bit Windows 7, download Vista.

  The drivers can be found here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=no&cc=no&prodNameId=73502&TaskID=135&prodTypeId=15179&prodSeriesId=73500&lang=no&cc=no

• You need to reinstall the windows XP Backup program that has been deleted by ardja software.

  You need to reinstall the windows XP Backup program that has been deleted by ardja software.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/302894

  It will be useful.

• one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes

  original title: supervisor password

  one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes, and I don't remember the password. What can I do to fix this?

  any practical advice will be much appreciated.

  Hello

  Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems)
  or a real computer store (that makes its own domestic service).

  The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.