HP Deskjet 2050 'control panel' (for lack of better term) missing

Similar Questions

• Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

  I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

  I have Windows 7

  Access has been-

  Beginning

  Devices & Printers

  HP Officejet 8600

  He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

  The option disappeared. I have no idea how it happened.

  How can I get that back?

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

  2. then go to Control Panel > programs and features

  • Officejet 8600-click and then click on uninstall a program
  • 

  3. then download the software on the HP web:

  •  HP Officejet 8600 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• HP deskjet 2050: patch/driver for printer

  I have an old printer hp deskjet 2050. I have a new hp laptop wwindoows 8 (I know if 32 or 64 bit). y at - it a driver/patch or something that will allow me to use this printer with windows 8.  at present, it can be used with xp, vista and 7, but not 8. I hate to have to buy a new printer. any help appreciated.

  Hi @lindylou7,

  Welcome to the HP Forums!

  I understand you are looking for a driver/patch for your HP Deskjet 2050 for Windows 8. I'm happy to take a look for you!

  I think that the driver you are looking for can be downloaded from this Web site, software and drivers. Or, you can use the printer HP install wizard for Windows, which will automatically download the software for your printer.

  Hope this is what you are looking for and have a great day!

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• Disable Control Panel for all users in Windows Xp

  Hi, I use windows XP Professional, I tried to disable the control via "gpedit.msc" Panel but it is always open to guests account n other account... Is it possible to disable the "Control Panel" / workstation and anything else that the case may be for all user accounts? How can I set privileges for any user / account of comments...

  Van ' t disable you my computer because that's where all the CD USB and all that jazz. You can restrict access to drive Local (c) but I'll have to check with a couple of my tech people to discover the steps on how to.

• Control Panel for the 120th want to scan

  I have aPC and iMac connected through my network to the all-in-one printer of envy. On the Control Panel, the scan function recognizes the PC, but not my Mac. Can someone help me?

  Solved the problem. Downloaded the complete sw of HP for Maverick, including the SW. scan functions as s dream to all computers, both PC and Mac.

• How do you change the color of the text in the control panel for W7 Pro?

  My control panel text is defined by a color forest green, and it does not change any theme I select.  Does anyone know how to change it for a decent black color?  I went to control panel > personalization > change the windows colors and settings, but then I saw no setting for the font color of Control Panel.  Control Panel of all this forest green color and is editable?

  I must inform you that this is hardcoded in Windows and cannot be changed.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Control Panel for W7 will not remain in the category option

  I had used the control panel and changed icon to find a specific option that was not evident in the category. I forgot to return to classes and eventually change the folder options in the world. Now the category parameter will not stick in Control Panel and change the options file locally or globally is not working either. Does anyone have a solution for this problem... TIA.

  --
  Eddie in Loveland

  "When the only tool you have is a hammer, you tend to treat everything as if it were a nail." -Abraham Maslow

  Not sure, but see if that helps - http://www.sevenforums.com/tutorials/262-control-panel-view-category-icons.html good read and see if it helps.

• How to set the regional settings of the control panel for the Dates

  original title: Control Panel regional settings for Dates

  I've already put the regional settings in Control Panel to date as follows: DD/MM/yy. But whenever I turn on my PC again, it goes back to this format: DD/MM/YYYY. How can I get there like JJ/MM/AA without having to set each time I turn on my PC? Thank you

  Thank you very much Palcouk! :)

  I solved it by formatting the excel fields to display the dates of my preference.

  I tried to close the excel files and restart my pc. Now the date format of the excel fields remained as I put IE JJ/MM/AA regardless of my regional date setting!

  Detective Conan. And thanks again. :)

• Removing an invalid element in Control Panel for W7?

  Here is a picture that relates to my problem:

  http://files.myopera.com/SouthernCross/files/N1.PNG

  I installed 'NVIDIA Forceware 195.62 WHQL' as well as their control panel. (This is not the one that is provided by my Builder.) The drivers were nice, but caused a few problems. I ran Windows Update and downloaded the drivers from my manufacturer and replaced the 195,62 drivers. I also uninstalled the control provided with 195.62 Panel... and the image above describes what is happening.

  How can I remove the extra icon?

  I tried these:

  -Remove 195.62 registry entries.

  -TAPI in my System32 folder and is seeking an additional nvcpl.cpl file and that the deletion but I only found one, by clicking on the nvcpl.cpl that I currently have in my System32 heading to the nVidia Control Panel that works.

  EDIT: I've removed the .cpl file in my System32 folder, which relates to the nVidia Control Panel, this causes the icon disappears.

  Try the method of Notepad in the following link to find the file name of the icon you want to remove the CPL.

  How to remove an icon not valid Panel?
  http://WindowsXP.MVPs.org/cpicon.htm
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Control Panel folder and photos on desktop missing

  OK I'm going round and round.  I tried first to locate a record lack of photos.  Found the missing folder, but something was wrong.

  These records and iMac Ltr 5 now my photos on the desktop are missing.  My pictures are always in my catalog of Ltr photo on my desk.  My Panel of the entire folder is missing.

  Knowing is Aurélien shows some folders by date. Tried > drop the last raise, but nothing.  Pleas help.

  My Panel of the entire folder is missing.

  If you do not see the files Panel, in the library only window > panels > folders.

• Get open C: message file doesn't have a program associated with it for performing this action. create an association in the control panel for the default program.

  I can't open my c or d ' training or any other when I click it

  Hello

  ·        Remember to make changes to the system?

  This happens because autorun.vbs is created by a virus or Trojan horse. The virus normally loads the file autorun.inf in the root of the folder all the hard drive or USB key and then run the autorun.bat file which contains script to apply and merge autorun.reg into the registry, with possible change in the following registry key to ensure that the virus is loaded at system startup:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

  USERINIT = Userinit.exe, autorun.exe

  Finally, autorun.bat will call wscript.exe to run autorun.vbs.

  When the antivirus software or security detected the file autorun.vbs as infected, the file will be deleted or deleted or quarantined.

  I suggest you follow the steps mentioned below and check if the problem is resolved.

   

  Method 1:

  I suggest running the fix which is present in the article below and check if the problem is resolved.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  If it does not help follow method 2

  Method 2:

  a. run the Task Manager (Ctrl-Alt-Del or right click on the taskbar)

  b. stop wscript.exe process if available by selecting the name of the process, and then click on end process.

  c. then terminate explorer.exe process.

  d. in the Task Manager, click on file-> new task (run?).

  e. type cmd in the box text open, and then click OK.

  f. type the following command one by one, and then press the Enter key:

  g. del c:\autorun.*/f/s/q/a

  h. del d:\autorun.*/f/s/q/a

  i. del e:\autorun.*/f/s/q/a

  Where c, d, e each representative the drive letters on Windows System. If there are several disks or partitions available, continue to command by changing on the other drive letter. Note that you must also clean files autorun from USB flash drive or an external portable hard drive as the hard drive may also be infected.

  If this does not help, follow the method 3.

  Method 3:

  a. click on start and click on run

  b. type regsvr32 /i shell32.dll

  c. Press ok

  d. you will see a message DllRegisterServer and DllInstall in the successful shell32.dll file

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iCloud Control Panel Ver 5.2 is not installed in Outlook 2016

  After you have installed the iCloud Control Panel for Windows 10

  you are prompted to configure Outlook for e-mail, contacts, calendars

  It will not be implemented (only said setting upward) I waited as long as 30 minutes

  tried to turn off the firewall and the two TrendMicro

  still does not work

  have also found that downloaded the program and the re

  I asked the same question on the help page of Windows and it is this that technology Windows, purple, wrote:

  VioletChen_MSFT responded on June 14, 2016

  • Microsoft
  • Support engineer

  In reply to SteveNightingale post on June 14, 2016

  Hi Steve,.

  Thanks for your reply.

  I tested on my side and I can't sync my calendar to iCloud for 2016 Outlook either. We don't know if Apple will release a fix. We recommend that post you a new thread in the Apple Support communities for additional help. Your understanding is appreciated.

  Kind regards
  Violet

• Libretto U100 - missing and unable to connect to COM7 Bluetooth device control panel

  I can't connect my laptop to my device. I want to "liberate" COM7 so that it appears available in Microsoft ActiveSync.

  As expected by using support & on my laptop, she advises goto Bluetooth device control panel, but this software is not available in Control Panel. It seems to be missing.

  Your help would be greatly appreciated.

  Com7 is the Bluetooth COM port server It is necessary if you connect from a device to the computer for example for Active Sync connection with a mobile phone.
  If you mentioned is not available. Then please check the following points:
  -Enter the DeviceManager and check under "Ports" If a COM7 has been properly installed.
  -Check if the COM Service is enabled in "Bluetooth Settings-> Options-> General-> Bluetooth COM port service"
  -Set the security settings to 'Standard' at end of test if it is not already the case
  -Do you have configured this COM7 already for another device? If so, just create an additional via Server Bluetooth COM port
  "ControlPanel-> Bluetooth Local COM-> Add-> create a virtual Bluetooth COM port for a server-> now select a port COM for example COM8.
  You configure the ActiveSync connection to the new COM port

• Bluetooth missing in Control Panel devices

  Originaltitle: Control Panel / Printers and other devices I have not see a bluetooth option?
  I'm trying to solve a computer problem, and it might be my bluetooth mouse.  When I go to control panel of configuration/Printers and other devices, I don't see a bluetooth option?

  Hello

  1. which version of the Service pack is installed on the computer?

  See the link below to enable Bluetooth devices in Control Panel for your mouse or your keyboard

  Activate the Bluetooth devices in Control Panel for your mouse or your keyboard

  http://support.Microsoft.com/kb/894035