HP LaserJet P2050 Series PCL6: How to print the mark using PCL commands

Similar Questions

• HP Laserjet P2050 Series PCL6 - PDF Direct printing available?

  Is available for HP Laserjet P2050 Series direct PDF printing?

  With the help of SAP print us PDF files to other printers, they accept a direct PDF printing.  Our HP Laserjet is apparently not, but we are trying to confirm.

  Thanks for any help

  -Other assignments HP say essentially that the manual will say precisely whether it is capable of a direct PDF printing.  I guess that 2050 is too outdated.

  Print a Report of Configuration of the printer and check to see what 'personalities' are available.

  The same information can also be available via the Integrated Web server (for the variations connected to the network) or the utility Toolbox .

• How to print a Word using ActiveX document

  How to print a Word using ActiveX document?

  Can I get a document to open and close. Impossible to find a way to have it printed. I think I looked through and I tried all the possible properties and methods, but I may have missed that I need.

  I would have preferred not to open the document if possible.

  Please point me in the right of ownership. For example?

  Thank you

  Chris

  
  

• How to print the jobes username printed by printer usingnetwork

  Please how to print the user name on paper printed for each print job printed paper

  If you want on each page, you can explore the properties of the printer to see if your printer driver supports this.

  • Click Start
  • Click on printers and faxes
  • Right-click your printer
  • Click on properties

  From there, my printer does print... properties via buttons and then the Options page, but your printer may be different.

  Separation pages (page between each print job) can do a job for you, but I've never used them so I can't advise further. If all goes well, another contributor may be able to advise on this. Or you could Google "separator pages XP.

  Tricky

  EDIT: It seems that Shenan Stanley is ready to explore the pages of separation with you

• How to print the page on WiFi printer using ideapad a1

  How to print the page on wifi printer using ideapad a1

  Cloud Print (available in the game store) use Google chrome to print from the A1 motorway. You must have Chrome installed on your computer. If not connected to Google (required) or your PC/Mac/Linux computer is turned off, it will be printed when you log-n.

• How to print the contents of a hard drive?

  Title: list of files on a specific drive.

  How to print the contents of a hard drive?  I would like to be able to remove the old files, but it would be easier if I could print the content rather than scroll through the file by file.

  Hello

  These should help:
   
  How to save and print a list of directory for a file and the folder of Vista (Windows 7 is the)
  same)
  http://www.Vistax64.com/tutorials/114593-file-folder-directory-list-print-save.html

  How to add view and directory of print in the context Menu in Vista and Windows 7 file
  http://www.Vistax64.com/tutorials/146031-context-menu-add-view-print-file-directory.html

  Use this free program which is great:

  KarenWare - printer - free directory
  http://www.KarenWare.com/PowerTools/ptdirprn.asp

  How to add the feature print directory for files in Windows XP, Windows Vista or Windows 7
  http://support.Microsoft.com/default.aspx/KB/321379

  I hope this helps.

• How to print the date on the pictures

  Can someone advise please how to print the date the pictures on my HP C6380 All in one printer.  I managed to change the settings to do that before, but now it's me beating.  I have a fault if I can.

  Thus, because there is no date and time setting on the printer that you will use the software you have to super impose a time and date on the photo.  Then print it on the printer.

• How to print the full path when you print photos with CS6?

  How to print the full path on the photo when printing photos with CS6?

  Hello

  You will need to use a Script to print the name of the file in Photoshop Cs6

  Something like Add file name as text layer "Julieanne Kost's Blog of »

  Concerning

  Assani

• ADF: How to print the query and the query passed into the class executeQueryForCollection methof impl VO parameters.

  Hello

  Kindly let me know how to print the query, and the parameters passed to it? I tried with the params parameter in super.executeQueryForCollection (qc, params, noUserParams); but could not succeed.

  I need save the query and the parameters passed to it. Kindly help.

  Thanks in advance,

  Kalpana.

  Here you go

  Coding with Passion: Oracle ADF - Debug Mode object query with parameters

• How to print crop marks, but keep the cut as A4 paper

  I was asked to create a brochure, although I normally do web development. So I installed InDesign a week, with no prior experience. I did created the brochure, created a PDF high resolution (using export) and sent to printing, assuming that it would be sufficient. It didn't: they must "impression of brands" (says my client), I'll assume that is crop marks.

  So I thought that everything I could on works bleeding and slightly modified my design to accommodate that (I got a few horizons towards the edges). But the question I have now is that I don't know how to create a PDF file with the right dimensions: A4 for the resulting page and crop around her landmarks.

  My Document configuration is set to A4 size (not counting the bleed). It is in the mm, so 210 x 297 mm. The purge is set to 3 mm on all sides. Slug is set to 0.

  So I'm going to file > print (in PDF), under Configuration to scale to 100% and marks and purge check "of crop marks. But the problem is that my design already covers the entire area of the A4, so the crop markers to add 'outside' of it. It does not, because "Paper size" corresponds to A4, as well as crop marks are not printed, they fall outside the print area (if my design is focused; it is top-left, I lose the right and down). Now, I can force it to print crop marks using "Scale to fit" - but then of course my page which is no longer not A4; evolving just everything down so that the crop are in the edges of a regular A4 format. But at least I see pretty brands he creates then.

  I know that I need to print on A4 oversize, but I can't figure out how to get that. I could fix it manually by adding a number of mm to the width and height, but I read everywhere that InDesign is supposed to do it automatically. So I think there is an option somewhere that I can't find.

  So my question is: where is the option to automatically increase my 'paper size' when printing to PDF, based on my configuration Document as well as the area for bleeds and crop marks?

  (this seems a simple question that I am surprised, that I can't seem to Google an answer to this...)

  Joris debonnet wrote:

  So I'm going to file > print (in PDF)

  This is your mistake. Use file > export... and choose Adobe PDF (Print) from the drop-down list type or file > Adobe PDF presets and choose the correct preset in the list based on that to your printer. Under the control of marks and bleeds box to use the settings of purge of paper and boxes for the brands you want - for sure, guides of crop possibly as well information page, and bars of color or brand registration request printer.

• How to print the image in grayscale in the rich black?

  How to print the image in grayscale as PDF as black process only instead of CMYK?  I'm on FM10

  Ed,

  What file format you save the image in? It is important, as indicated by error. If you left it as a PSD, then FM performs a conversion to RGB. A TIFF or EPS file properly remains blank (i.e. on the plate of K). Other formats, such as PNG to grayscale are actually indexed color and solve RGB when FM creates the PDF file in the presence of plates of Spot and where the components are mapped to the CMY plates also.

  Here is a sample generated using SaveAsPDF with the CMYK option with the same 'gray levels' file saved in the format PNG, TIF and EPS in Photoshop (Note how the PNG isn't all there, on the plate K):

  

• How to print the transaction validation sql?

  All,
  
  With the help of Studio Edition Version 11.1.1.3.0.
  
  I got a violation of primary key constraint that I can't quite understand. I can insert fine lines and everything looks very much like the page refreshes, but when I sign, I get the error. I would like to know what is committed to the database. I understand the problems normal display when your association is not composite: http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcadveo.htm#CEGJAFCF, but in my case, this one is.
  
  How to print the SQL that is generated when getDBtransaction.commit () is called?
  
  That should tell me why I get a command validation error (if that is what it is).
  
  Thank you
  Will be

  Add - Djbo.debugoutput = console for the properties of the project

• How to print the Outline view only?

  How to print the map view black and white only? I've pasted the outline of a layer, hiding all other layers, but still printed Preview color mode.

  Only way I know is t take a screenshot and print that.

• Cannot print the content using Epson Stylus CX4700

  Can anyone tell how to get my printer Epson Stylus CX4700 to print?

  I can scan from the printer to the computer, but it will not print scanner or computer.

  Original title: Epson Stylus CX4700

  Hi Thomson,

  Welcome and thanks for posting in the Microsoft Community.

  From the description, I understand that you are unable to print the content using a printer.

  This issue would have occurred due to some hardware problems (printer).

  Please provide us with additional information to help you best:

  1. You did changes to the computer before the show?
  2. Have you received an error message / error code when you try to print the content?

  I suggest you to perform few of the steps mentioned in the article below and check out them if you are able to print the content in case of problems.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab3&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart