HP Mini 311 1037 NR: 311 Mini PC drivers is not available on the HP site

Similar Questions

• Navigate in the Mini Bridge is not available under the file Menu in Photoshop CC

  Recently installed CC Bridge and Photoshop CC in the Windows 7 environment. "Browse in Mini Bridge" option is not available in the file menu. I reinstalled bridge CC, rebooted, yatta yatta, but no option of Mini Bridge. Any ideas how to make so that it can install/come?

  Thank you!

  Kent

  Mini Bridge is no longer available, then he will never run again. All Flash-based extension signs were removed from Photoshop, and Mini Bridge is one of them. More info here:

  Photoshop: Spring cleaning | Mini Bridge

• Battery saver is not available on the iPad mini

  We have updated the iOS on iPad for work and when I went to turn on this subject battery saver appears even in the settings. Is this a bug or is this normal for iPad mini?

  It used to be in the settings > battery.

  I'm not on my iPad Pro 9.7 "with iOS 9.3.1 either.

  Maybe someone else can confirm that he is no longer available?

• Taskbar and min and max do not show on the homepage and e-mail

  When cleaning key board, the taskbar, and the top part of the page containing the min and max symbols disapperared.  How can I restore them?

  Hello

  I suggest you to try the steps below and check if it helps.

  (a) open Internet Explorer by pressing the button of the window of your keyboard, then clicking on Internet Explorer.

  (b) move your cursor to the top right and click the Tools button, and then click file.

  (c) uncheck the option full screen .

  You can also press F11 on your keyboard, which would help you to get to the normal screen.

  Hope this information is useful.

• Mini 210-2000 can not recover the system

  Hi, I have a 210-2000 mini hp, I did a system restore and the system crashed. I have no recovery discs and I'm stuck with what I need to do to reset the op sys, can u inbox very much my email with any help rec, im ped. He will go to the safe mode option but does not successfully start, all continuous loop again and again, many thnx, chinboy

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  You can also publish returns with the following details.

  1. the full model number and your laptop Nr series 210-2000 of Mini - see here for a guide to the location of this information or the list here.

  2 the full version of the operating system that you use (IE Windows 7 64-bit).

  Kind regards

  DP - K

• Mini HP which has not worked for a year at least.

  We have a mini HP which has not worked for a year at least. I try to get back to work and am getting a screen that says: enter the administrator password or start on password. Then the disabled system 83656543. can you please help?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.

  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  Kind regards

  DP - K

• Video OK but sound does not go to the TV when connected HDMI on HP Mini 311 with XP.

  Video OK, but the sound does not go to the TV when connected HDMI on HP Mini 311 with XP. Has anyone experienced and resloved this issue and can share with me.  The solutiuon provided in the manual does not seem to apply to the Mini 311 model that we use. Help, please.

  James,

  Visit this link,

  How to get his TV using HDMI cables?

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• Wake on Lan for a Mac Mini running Leopard does not

  Don't know where to best this post, but here's.  I'm trying to set up a Mini as a server of music for my audio system.  The Mini is a core 2 duo with 1 GB of RAM of 2009 I think.  Can I upgrade to Snow Leopard (possibly Lion/10.7 if I improve memory, what can I do anyway).  The mini is on a local network using a Netgear router and is only connected through wifi.  No ethernet.  The Mini is connected to a DAC by USB, and which is connected to the audio system.

  I want to run this without screen and keyboard and rely on my iPhone or my MBAir to control the Mini via screen sharing.  I want to leave the Mini sleep don't no need then to wake up when I want music.  Problem is, I can't get the Mini to wake up.  I tried the Wake on Lan and other tools of waking distance so I can start playing the music, but I can't seem to wake up.

  I have the correct MAC address and IP address (I booked a local IP address for him).  I'm sure that the two computers are on the same network.  I put the Mini to wake on lan in energy saver prefs.

  Any suggestions?  Thanks in advance!

  Hi, I have not 10.5 available now and just ask...

  In Sys Prefs is the Mini on Wake for administrator access? (Can't quite rememer what pref pane is in.)

• Satellite on L9W Mini - B - couldn't pass it until the battery is completely discharged

  Hello

  I have the following problem with my Satellite click Mini L9W - B - happened already twice.

  I suspect that this may be connected to a Windows 8.1 setting. It may also be that it is BIOS associates.

  PROBLEM: if I leave the phone in standby mode (by simply close the lid), then if I do not use it for a while (> 10 hours) and then after that I could not turn on laptop - it simply does not meet all the keys including the power on button. It does not matter that I connect the power or unplug it, I still can't turn on the laptop, as it doesn't matter I have try with or without connected keyboard. BUT: the battery on the back on the screen is hot, so of course the laptop is not off completely and something (i.e. windows sleep mode or bios or something else) keeps me to turn it on.

  The solution I have at the moment is to leave the laptop for a very long period offline (to drain the battery completely - it will be not hot not more!) and then connect the power and then it will be able to turn it on. Otherwise, open the cover of the screen and manually disconnect the battery and connecting it then still also work. After that, the laptop can be marketed and works very well.

  Of course, it is not very good because to wait very long (several days!) or to open the lid isn't really a good option when you need the laptop!

  Can you help me?

  Maybe it's something to do with some Windows power saving features?

  Thank you very much!

  There is a quick fix rather than wait for the battery drain...

  Hold down the power button / stop for about 20-30 seconds. That the material should turn off power completely allowing you to turn it back on.

  Updated the bios with the latest version and apply all windows updates after that, it can solve the problem of sleep bug

• I've updated to 9.3 on my iPod and my Mini iPad; Night shift is now on the iPid but not the iPad Mini. any ideas?

  I've updated to 9.3 on my iPod and my Mini iPad; Night shift is present on the iPod, but not the iPad Mini. and ideas?  Thank you!  CB

  Night shift is only on the iPad Mini 2 and later versions. http://www.Apple.com/iOS/updates/

  -AJ

• Dead button, mini home iPad does not

  I left my mini ipad charging for a whole day yesterday and was just dead when I arrived home (connected at about 07:30, got home around 22:00).

  I tried locking push button and the "home" button and went into account before that, my home button works well so I think that there is no guarantee that I can perform the reset in this way. The last time I had similar problem last year (the case was also dead after left load for a long time), I took to a third party service center and was functioning properly shortly after. I plugged my ipad back into power source, nor any laptop computer. Is it possible that I can try to solve this problem before coming back to the service center? Since it costs me a lot of money.

  Turn on the AssistiveTouch

  When you turn on the AssistiveTouch, you will see the AssistiveTouch menu. You can drag it to any edge of the screen, then press the menu to open it.

  There are several ways to turn on AssistiveTouch:

  • Go to settings > general > accessibility > AssistiveTouch, then turn on the AssistiveTouch.
  • Tell Siri 'Activate AssistiveTouch.'
  • Go to settings > general > accessibility > accessibility shortcut and turn onto AssistiveTouch.

  When the accessibility shortcut is enabled, you can enable AssistiveTouch on or off from any screen using Triple-click home. Simply press the Home button three times. To adjust the speed Triple-click, go to settings > general > accessibility > home-click speed.

  Replacement of the device under warranty

  If you have the opportunity to get the button replaced (by obtaining the replaced device), it would probably be the best route. It would be much easier to use a functional button only to use AssistiveTouch. If your machine was purchased less than a year before, or you bought AppleCare and the unit was purchased less than TWO years ago, it is under warranty. The warranty does not apply if the unit has been dropped or suffered from any accidental damage to the user. If the unit is not under warranty, you can see...

  AssistiveTouch allows you to control your device

  You can use AssistiveTouch to find and adjust some settings on your device as Volume, screen, lock screen rotation and more. Click on the AssistiveTouch menu and click on the parameter to be modified.

  To turn off your device, follow these steps:

  1. Open the AssistiveTouch menu and tap device.
  2. Touch and hold the lock screen until "slide to power off" appears.

  You can also use AssistiveTouch to access your home screen. Just open the menu AssistiveTouch and press Home. To use Siri, open the menu AssistiveTouch and press Siri. You won't see Siri on devices with iOS 5 or later.

  To access your Notifications, go to the AssistiveTouch menu and press Notification Center. To reach the control center, go to the AssistiveTouch menu and press Control Center. From there, you will be able to do things like turn Bluetooth on and off, use AirPlay and AirDrop, take pictures and much more

  If you have an iPod:

  http://www.Apple.com/support/iPod/service/prices/

  If you have an iPhone:

  Model	Replacement price
  iPhone 2G (original), iPhone 3G, iPhone 3GS, iPhone 4	$149
  iPhone 4S	$199
  iPhone 5, iPhone 5, iPhone 5 c	$269
  iPhone 6, iPhone 6 s	$299
  iPhone iPhone 6s, 6 Plus more	$329

  If you have an iPad:

  Model	Replacement price
  Mini iPad (1st generation)	$199
  (original) iPad, iPad 2, iPad mini 2	$249
  iPad (3rd or 4th generation), iPad mini iPad Air 3	$299
  iPad 2 Air	$379
  iPad Pro	$599

  Note that they will not replace the button, but rather the camera itself. Check your warranty here:

  https://selfsolve.Apple.com/agreementWarrantyDynamic.do
  The link above requires your serial number, which is located at the rear of some devices. If your device does not have the serial number printed on the back, you can go to settings > general > topic > serial number to find. If your unit is under warranty, the replacement will be free.

• Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  Is it possible to connect my Mac mini to my Mac Pro laptop using the memory on my mac mini for installing software Ableton as I don't have 3 GB available on my Mac Pro.

  I want to download Ableton software, but it requires 3 GB of free memory that I have available on my MacPro laptop not because most of it is used for my library of music because I'm a DJ.

  I'm not sure how I can do it or not at all.

  Thank you very much.

  1. a Mac Pro is not a laptop. Its a big desktop computer.  You probably have a MacBook Pro, which is a laptop.

  2. No, you cannot share the memory (live RAM) or storage (disk space, which is not memory) like that between computers.

  However, it is very very bad practice to have so little storage space available for your computer.   If you have less than 3 GB, you should seriously consider an external drive. and unload some files on the outside. Its best not to leave your hard drive to go below 10 GB of free space because it can seriously affect your computer's performance.

• Mini 210-2130NR: impossible to connect to the wifi network driver missing

  I recently did a clean Windows 7 on my mini installation because the upgrade of Windows 10 left essentially unusable. I managed to install windows 7 Professional on this topic but I am not able to connect to my wifi to do updates. In Device Manager it says missing a network controller and video controller. I was able to find an adapter (Realtek PCI FE Family Controller) but I need help to find the others. I tried looking for drivers available under my product on the HP site, but she had something specific to Windows 10.

  Device Instance path:

  Network controller: PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01\4 & EDE306C & 0 & 00E0

  Video controller: PCI\VEN_8086 & DEV_A012 & SUBSYS_1584103C & REV_00\3 & 21436425 & 0 & 11

  Thanks for any help!

  Hello:

  You need these drivers...

  Network controller:

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  Video controller: you have posted you are running W7 64 bit, but your laptop came with W7 32 bit.

  You must use the driver directly from Intel 64-bit for the 64-bit version.  a 2nd on the list.

  Note: I think the Intel driver site is messed up because when I click on the link to get the driver, nothing happens, and this happened to me twice today.

  You may need to wait until after July 4 holiday to get the driver if you have the same problem.

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/Intel-Graphics-Media-Accelerator-3150-Intel-GMA-3150.html

• My screen is not clear on the mac mini, when you use HDMI with a TV monitor

  I have just bought a new Mac Mini and plugged into my TV with the HDMI cable. The display is not very clear, and in particular, the text seems to be very low resolution. Someone has ideas how to change settings to improve quality?

  What is the native resolution of the TV?
  What is the display resolution?

  Go to System Preferences > displays and look.

  Also dot the circle that says put across and what resolutions are available?