HP Mini: HP Mini Code stop
Hello
I can't get into the BIOS.
After that I tried three times, I get the code
51484506
Can someone help me?
Thank you in advance.
Hello
Enter: 44582528
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP MINI SYSTEM STOP FATAL ERROR. CNU9302RM6. Need password to connect!
Please someone SOLVE THIS PROBLEM. I HAV NOT OPEN MY PC one YEAR, please help me if you can?
Good day!
Boss!
I have the password for you
Please enter = e9lof17b4g
Kind regards
KNRK
I work for HP
-
Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat No 4 GB
Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat no limit 4 GB?
For the VIDEO?
Thank you
Almost all of the Canon 'Vixia' line of cams are less than 1 k $. The Vixia HF G30 $1150 and it is the only model over $1 k. Here are all the models to consumer prices. (X XAnn, XFnnn, & XCnn series is top of the line, and of course the EOS film bodies are much more expensive.)
As far as I know, they all supports SDXC cards.
-
HP MINI SYSTEM STOP FATAL ERROR. CNU93766CK?
HP MINI SYSTEM STOP FATAL ERROR. CNU93766CK
Hello
Please try (all lower case):
e9lofxgges (3rd tank is tiny l).
Kind regards.
-
I need to unlock compaq mini code is CNU027599F, please help
I need to unlock compaq mini code is CNU027599F, please help
Try to ashes.
e9l17xqoo8
3rd letter tiny L.
4th is number 1.
7th letter lowercase Q.
8th and 9th letter lowercase o.
Use this code to go into the BIOS.
Disable all passwords that are enabled.
IF demand for CURRENT password using this code.
REQUEST NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times. I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.
Alex
While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:
1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.
2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:
You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.
* My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.
http://www.Knoppix.NET
http://www.nu2.nu/pebuilder/ - Bart PE BuilderWhen you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows
And for future disaster recovery programs:
http://www.elephantboycomputers.com/page2.html#Backing_Up
If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!
-
800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics
800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics
Hello Michael,
Thanks for posting your query on the Microsoft Community.
You can improve your current PC to Windows 10 by going to the Windows 10 software download page to download the media creation tool. The media authoring tool can be used to create a USB or DVD media to upgrade your current PC to Windows 10 or install Windows 10 on another PC.
Follow the instructions on the download page of Windows 10 software: http://www.microsoft.com/software-download/windows10
Note:
When upgrading to Windows 10 using media, you must run setup.exe from in your version of Windows 7 or Windows 8 and authentic. If you want to boot from media, you must have upgraded to Windows 10 previously. Boot 10 Windows media directly without upgrading to Windows 10 previously is not supported and will have problems with activation.
See also:
Helps the upgrade to Windows 10
How to: solve the Setup and stop common mistakes during the Installation of Windows 10
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
HP mini: Hp mini 110-1162ev password on the code stopped
Hello
I have a Hp netbook model #: HP Mini110 - 1162 ev and it has bios password. the system code is CNU94682HZ. -Cordially.
Hello
Please try (all lower case):
e9lovgu7z0
Kind regards.
-
I just bought this Mini about 6 months of my roommate and the password they gave me the laptop worked until a few weeks ago and now this password no longer works for her. I get a password check failure Fatal Error... System stopped. Code and the Code is the serial number for the laptop itself.
Hello
Enter: e9lovo7545 (3rd character is a lowercase L)
Kind regards
DP - K
-
HP MINI SYSTEM STOP FATAL ERROR
Can you please help me. I have my husbands of hospital records, that I need to fax on to his job. I don't know that I made an error on my screen to say the password check failed.
Fatal error... System stopped.
CNU92487P0 Im not sure if the last character is a number or letter?
PLEASE DEPUTY.Hello
Shut down the laptop. Tap away at the esc you key start Notepad to open the Start Menu. Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.
Note: If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .
Post back with the details of any error message.
You can also publish returns with the complete model number and your laptop Mini Series Nr - see here for a guide on this location.
Kind regards
DP - K
-
my computer was fixed when I try to access my computer says I need to enter evidence of certificale license code number of authenticity located on the underside of the computer. the number is rubbed off. How to find where to find this company Dell or Microsoft code? mini computer Dell Inspiron Dell 910 2005.
Hello
I suggest you get in touch with Dell support using the link below.
http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn
Hope this information is useful.
-
Microsoft Explorer Mini Mouse stopped working a few days after installation
Running Vista Home Premium.
Microsoft Explorer Mini Mouse a few days ago.
Worked perfectly.
Today, it just stopped working - the mouse pointer disappeared and would not pass.
This is a wireless mouse and the blu is always lit.
Restarted Windows - no change.
Use the USB differet for sender - message this driver installed correctly.
No change.
Used to another USB Wired mouse, worked.Hello
Looks like the mouse has a problem.
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBControl Panel - Device Manager - click in the empty area - VIEW - show hidden devices
Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
It RIGHT CLICK and UNINSTALL all. The device is your mouse or similar.now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.
RESET
This refresh battery USB and hopefully it will allow the unit to install. Update the driver as needed.
Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
Try to remove all instances and restart then plug the drive.
http://www.NirSoft.NET/utils/usb_devices_view.html----------------------------------------------
If no joy:
The mini mouse has a 3 year warranty.
Joystick - see guarantee near bottom of page
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=002&active_tab=systemRequirementsWarranty
http://www.Microsoft.com/hardware/warranties.mspxClaims of Microsoft Hardware
Hardware support of MS and warranty claims - 1-800-936-5700
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Hi, my HP Mini calls for a code of administration, I get a system off message and a code = 53619810
Hello
Enter: 42771236
Kind regards
DP - K
-
When I use not comp. for 5 min. tt stops. How he stay longer.
When I do not use Comp for like 5 min it shuts down. How he stay longer.
When I do not use Comp for like 5 min it shuts down. How he stay longer.
It 'stops', or does it go to sleep?
Change the settings of your screen saver, sleep or Hibernate.
-
My mini iPad stop some games while I play on its own
For the past 6 months or so, my 1st version mini iPad, iOS 9.3.1 is just turn off the game I play on its own, while playing. Or he died.
is there a solution for this?
Is it always the same game? What is the name of the application?
Maybe you are looking for
-
My laptop crashed and I lost my recovery key. All my favorites always appear on my android samsung galaxy 4. How can I recover my original recovery key? I tried to delete my account and create a new one, as suggested, but now I get a sync error sayin
-
How to activate the iPhone that it must first contact the carrier
Dear Sir/Madam, I would like to ask onHowe for help to activate my iPhone 4 it says need to contact the carrier
-
My Mac 2011 version 10.7.5 isn't running well... Help
My Mac works strangely. Sometimes the PIN wheel takes forever. Sometimes things run really, really slow. His intermittent. And strangely it just started happening about 3 months ago. Here are my results of EtreCheck: EtreCheck version: 2.6.4 (224)
-
Remote connection rearranges the desktop on the work computer icons
Hello I arranged the icons on my desk in a medium spesific. After I connect to the computer work from home, all the icons on the computer work go to the left screen (auto arrange?) and I have to drop every time (I have many of them on the desktop). H
-
connect to hp 2540 wireless to linksys WAG200G router
I try to connect the HP DESKJET 2545 to the Linksys WAG200G router via the USB cable and the HP software. The software detects the router and the parameters (name SSID and password) but finally when it tries to connect, it says that the name of the n