HP P6674Y: Had to reformat the hard drive HP Pavilion the recovery disc sending the error message
After reformatting the Original HP Pavilion drive I got the recovery disk, but I keep geeting a message
If you receive this message on a hp PAvillion call HP support
Hello
HP has an official presence on this forum other than for administration and moderation. The help you receive is mainly by volunteers.
HP support number is 800-474-6836 or 800-HPINVENT or online here.
Tags: HP Desktops
Similar Questions
-
has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)
has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problemHello
I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.
If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...
1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.
2. change the setting in BIOS on IDE / ATA
3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html
After the back if your BIOS is IDE / ATA
Tricky
-
I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.
Help, please
Post edited by: Bil Colthurst
Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations
If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server
-
Original title: portable destroyed - need for car access
I don't know if this is the right forum - please advice if it is not.
My friend's laptop computer was destroyed in a car accident. I pulled the drive and placed it in my desktop XP system and the drive appear in good health. However, I received permission issues trying to access records on the disk and thought that it was because of me using Win XP and the laptop was Win7x64. My questions below are based on the assumption that I'm not able to access these files on my Win XP system. If this assumption is incorrect, so please let me know.
I have a laptop that I don't use and put the disk in it. I was hoping it would be plug and play all the new material, but after reading a little online, I know that this is not the best thing to do and will probably not work as did the earlier versions of Windows.
In the end, I care retrieves the contents of the disc, although it would be great if I could lend my laptop for a few weeks with "its files" until it sorts how to replace the laptop.
Can I get the player Win7x64 working on the laptop computer of replacement by reinstalling Win7x64 on this laptop? I'm not "means a clean install/reformat, but have rather the Setup program detects an existing installation, and do its magic to get the operating system runs on new hardware?"
I know that this raises questions of MS licenses. If the installation process could get his old system running on the laptop replacement, if I have a small window of time completely to access his files before being forced to re-register the OS? I'm hoping so.
I'm looking for only a short-term solution - I do not recommend that he hopes that drive long term because the laptop got quite truncated of the accident, and once he gets a new laptop it will have everything he needs on this subject (OS, licenses, etc.). If I have a small window of time where I can simply copy their important files, or to lend him my laptop with its player and him can bring to its domestic network and the print out of all the things that are important, that it's going to be all together to move them to a new laptop when it is available.
Thank you
Hello
You experience this problem because of the permissions applied to these s folder. To resolve this problem, you will need to take ownership of these files and folders.
Method 1: You can follow the steps mentioned in the link below to take possession of the records
Troubleshoot "access denied" when opening files or folders
(Article above applies to Windows Vista, not valid for Windows XP)
Also check out the article below
How to capture a file or a folder in Windows XP
http://support.Microsoft.com/kb/308421Method 2: You can try a custom installation (not a format\clean facility).
See the link below for custom installation
using the install option custom without formatting the hard driveNote: In custom installation only data would be transferred in Windows. Drivers, applications and the old folder will need to be reinstalled.
-
Original title: startup problem
I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error. I have since run the hard drive test in bios and it passed. Anyway, clone has failed, and now the original hard drive will not boot. My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit). Clonezilla removes the start settings for the original disc? And if so, how can I restore it? The computer starts just a black screen with a cursor at the top left. When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.
Hi DougEisenmann,
Clonezilla is not supported by Microsoft.
If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.
Check out the link:
Windows to boot from a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
See also the thread which has some troubleshooting steps for this same issue.
The above link contains third party links provided by other users.
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer -
Hard Drive failed with no recovery disc
I'm working on a h8 desire - 1417c. My client had a catastrophic hard drive failure and after replacing the same, I can't have Windows 8 to activate. I spent over an hour on the phone with Microsoft and they couldn't activate it, either. I have the product key from the bios, that's all right. Why MS do not block the key once it has activated the first time? The client is blocked to buy recovery disks? Thank you.
I spent a few hours on the phone with Microsoft and they have finally capitulated and sent me a copy the retail 8 Win and the new product key. They access the system remotely and could not activate the installation with the built-in key. Yes, problem solved. It was not easy.
-
I have a HP A1730N with factory installed Vista Home premium installed. I had a problem and after that windows has saved my computer I did a system restore
operating mode. I reinstalled Vista and now I'm trying to recover my files in the backup.
My question is how can I open backup. He saved my files in a file MINWINPC and inside it, there are 5 files Backup.001,.002,.003,.004,.005
Can anyone help
Hello
If HP makes recovery backup as part of their cover of the factory contact HP
http://WWW8.HP.com/us/en/contact-HP/contact.html
If Vista does the backup:
Repost in forum microsoft link that is specific to the backup below questions
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
It installed fine but it does not acknowledge all of my material, i.e. monitor, modem... the monitor works but some weird setting. Is there a solution or a download that I can burn it to a cd to allow my computer to run properly again?
You need to install the drivers from the manufacturer of your PC, if a brand of large surface or a laptop, if not by the creators of individual materials, for example, your motherboard / graphics if its own card, etc.
-
?
Simply reinstall the soft CC and connect.
Mylenium
-
I had to format my hard drive and now I need a video controller (VGA Compatible)
I have a PC laptop Toshiba Satellite A105-S4334
I am running Windows XP with SP 3
I had to reformat my hard drive. I used the disc that came with the laptop but I can not use both screens for presentations.
He says I need a video controller (VGA Compatible) but I can't find it on the Toshiba site or the site of Microsoft.
Where can I get good video controller (VGA Compatible)?
Hello
I suggest you according to the question in this forum and check if that helps:
It will be useful.
-
Reinstall lightroom aftet reformat my hard drive
I had to reformat my hard drive and now I want to reinstall Lightroom. I have my serial number when I bought last year, but where do I enter the serial number so that I can download it again? Thank you
Here is a page which may help you
Download and Installation Help | Download and Installation Help
-
I reformatted my hard drive, but I forgot to disable first the CS6
I reformatted my hard drive, but I forgot to disable CS6 first. I have CS6 installed on both computers. I disabled the CS6 on one computer and then installed CS6 on another computer. Then, I had problems with the new computer and am reformatting the drive. Problem is that I forgot to disable CS6d from the new computer. It'll ruin me?
Reconfiguration of the computer or replacement
You may receive an error of activation if your computer has been changed recently. You can't fix this problem yourself, if you have done the following:
- Changed the configuration of your computer, for example, due to a failure:
- Upgrade your computer hardware
- Replace a hard drive
- Updated the operating system
- Got a new computer and old computer is not available
Support Adobe Contact specialists via chat or by telephone to the 1-866-772-3623.
Keep your serial number range of hand. Find your serial number on the CD or DVD case, or in the email confirming your purchase. For more help finding your serial number, see find a serial number.
- Changed the configuration of your computer, for example, due to a failure:
-
I lost my product key. I had to wipe my hard drive due to the virus and I installed win xp pro back. now, I can not activate my copy. This is the disc that came with the computer. its windows xp pro sp/2 from dell. I've tried everything I know using keyfinders and research on the disk. the keyfinders and drive both will eventually go wrong. What can I do next?
original title: lost product keyHello
Contact Microsoft telephone support on this.
http://support.Microsoft.com/contactus
For more information visit: How to replace Microsoft or hardware, packs software service to order and replace product manuals
-
I had to wipe my hard drive and reinstall my system ios. I logged into Adobe After to get my programs, but they have no record of buy me something with them. How can I reinstall my programs?
you just need your order number and the installation files.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.3| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Hello. Hard drive of my computer totally crashed & I had to wipe my hard drive. I wasn't able to log out of my apps for the creation of clouds which my wife has 2 licenses for us. Can someone please explain the process to re download these apps please? Thank you..
Hello
Please refer to the help documents below to download the application Adobe CC:
Download, install, update or uninstall applications
Kind regards
Sheena
Maybe you are looking for
-
When I select a link in an email in the Mail application, it blocks the phone and none of the touch screen works
-
What stylus for use with iPad air2?
Which stylii work with iPad air2? Any ideas?
-
When you print multiple pages of a draw, the printer stops and displays an Error Message "printer cannot print the document. The location in the document where the printer stops does not but generally the last or last page.
-
Hola, Estoy realizando a project in Labview v8.0 y estoy trabajando con una waveform in the me interesaria poder apply zoom in una zona as el usuario deseara, lo no is're como hacerlo, ¿alguien me can help? MUCHAS gracias,. G.R
-
U2713HM, the functionality Windows 10
Is there anyone who knows how to get a Dell UltraSharp U2713HM to work on a Windows 10 PC? I can't work properly, strange colors, resolution etc.?