HP pavilion dv6-1030us: enter the administration password or power on password

Similar Questions

• Pavilion 15-p133cl: enter the administrator password

  I forgot the password on my laptop bios administrator,

  the deactivation code is 1801b3d8

  Thanks for the help,

  Tanner Anderson

  Hello

  Your laptop is to produce a code hexadecimal halt which is stored in the ram as a 'one stop' and is recalculated after a reboot.  This indicates that you have a FRIEND bios later and unfortunately none of the current code generators will work for this - surprisingly, you can always remove power on password of the machine by removing the cell RTC (leave the connected Power Board) and then press and hold the power button for 60 seconds before reinserting the RTC.

  The bad news is that the RTC is on the 'wrong' side of the motherboard so is going to require a lot of disassembly - see Page 115 of your Maintenance & Service Guide.

  Kind regards

  DP - K

• Pavilion touchsmart 15 l: enter the administration password or power on password

  Powered on my computer and got this message
  Enter the administration password or power on password
  Entered the password in wrong 3 times and got this number
  61704252
  Help please!

  @Jstoth01

  Enter 74662894

  Kind regards

  DP - K

• Laptop HP 15: Enter the administration password in the BIOS Setup

  Hi, I have the problem to start my HP laptop when I enter the configuration of the BIOS of my laptop HP 15, it shows me to enter the administrator password. If I entered the wrong password three times on it, she showed me system turn off the message and the code is 73203555. Can you tell me the administrator password? Thank you...!!!

  @pcdockevin

  Enter 62161591

  Kind regards

  DP - K

• HP envy: enter the administration password or power on password

  When you start it says
  
  Enter the administration password or power on password
  
  Then, after 3 attempts failed
  
  It says disabled system
  [50790401]

  It worked! Thank you!

• Enter the administrative password or power on password

  I'm not sure this ad in the right place. But I have a notebook computer that asks me to enter the administrative password or power on password. After three attempts, it tells you "system turn off 50806608. Is anyway more to mount this?

  Try to enter > 45764228

• HP Pavilion dv6: HP Pavilion dv6 show "Enter the password administrator or power on password"

  Hello

  Can you please help me.

  I have a HP Pavilion dv6 I get the number is 54154481.

  Thank you very much

  @Malvea

  Enter 41832407

  Kind regards

  DP - K

• Enter the administrator password or power on password

  I have one enter your administrator password or power on password message and then he gave me a 58426441 code

  The laptop it displays in Spanish

  put administrator contrasena o contrasena power led

  Sistema desactivado 58426441

  You can help me to unlock. I took it apart looking for a cmos sensor but couldn't easily find.

  HP 2000-369WM

  Series [redacted for privacy]

  Hello

  Enter: 47584487

  Kind regards

  DP - K

• Need to enter the administrator password before I can download the software upgrade

  I found I need to install an upgrade of the software, but cannot do without an ADMINISTRATOR PASSWORD ... which I don't have (or I had not one when I implemented that stand-alone pc, or I forgot whether I don't have an administrator password to use).

  Can someone tell me how to find what it is, how to change it, or how to make my normal "logon" Administrator status (without having to set an administrator password, because that's the problem I have).

  I tried various methods, but everyone tells me that I need the ADMINISTRATOR PASSWORD and so I'm stuck.

  I've seen a lot of suggestions for the windows password (which I guess is different for the ADMINISTRATOR PASSWORD), because none of the suggestions for this work without an administrator password.

  Hello Jules.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. is the issue specific to the installation of software updates?
  2. what troubleshooting have you done when you say, 'I have tried different methods?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur either if the user account control settings can not correct because of where it stops installation or there is a problem with the registry keys that control the installation of a program.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  The problems that the programs cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  If this does not help, use method 2.

  Method 2:
  Disable user account control and then try to install the software updates.
  Reference:
  Disable UAC in Windows 8
  http://blogs.msdn.com/b/hyperyash/archive/2012/07/18/disabling-user-account-control-in-Windows-8.aspx

  Important notes:

  Control (UAC) user account can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP pavilion dv6: enter the administrator password

  I get the message "Enter administrator password or power on password... I use pavilion dv6 - 3120us... My error code is 51444328... Please help me...

  @Dee_Vee

  Enter 44522908

  REO

• HP Pavilion dv6 problem "Enter the password administrator or power on password"

  My children entered the BIOS on my HP Pavilion dv6 Admin password.

  After that three bad tent the screen says SYSTEM 52566801 DISABLED

  Can anyone help me, please.

  Thank you

  Stepan

  Hello

  Please enter:

  43444227

  Kind regards.

• Pavilion dv6-1230us: HP Pavilion dv6 problem "Enter the password administrator or power on password"

  Ask administrator password... when I go any number or letter after 3 times

  IT IS THE MESSAGE

  DEACTIVATION OF THE SYSTEM

  80917243

  ANY HELP?

  Boly try.

  35675885

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Pavilion dv7: enter the Administration password or power on password

  Hallo...
  My computer is blocked and on my screen, I get the Message "password entered Administration or power password"... After a few attempts, I get the message 'system turn off' and the Code 67724899...
  Can someone help me please...?

  @Manousissoti

  Enter: 78682219

  Kind regards

  DP - K

• HP 260 G4: enter the administrative password

  Hi can you help me that my laptop is hp G4 produced 260: NOZ78EA #ACQ the problem, is that it continues to ask for an administrator password or power on password so I don't find it and after that I have try typing the password 3times these numbers comes to the off screen 68579207 system

  @siyabonga1

  Enter 77451829

  Kind regards

  DP - K

• HP 1000: Enter the administrator password

  I'm having the same problem to enter administrator password or power on password

  After you have entered a wrong code 3 times. I received this number 63707618

  Help kindly as a matter of urgency

  Thank you

  @Adedeji1

  Enter 72665238

  REO