HP printer prints 5740 too dark on my Mac

Similar Questions

• Lightroom 5 prints are too dark, so a problem now!

  Hello

  Using LR 5.7

  I import images in RAW and convert to DNG.

  hen I export in a JPG and print them, the impressions are very good.

  When I print from the Lightroom print Module, impressions come out too dark with a significant loss of detail in the shadows.

  Adobe...  This is a major problem since version LR 1...  It's high time you fixed!  I wasted tens of sheets of paper because of this problem!

  My screen is just a 24 "calibrated monitor IPS ASUS.

  Windows 7, 64 bit.

  Thank you very much

  Kind rgds

  Rob

  In the print module, under Print Job, print setting, brightness level of contrast and of + 30 to + 15 (these settings work with my printer). Do a test print. If necessary, change the settings. Repeat the test. Once you have arrived at the right settings for your printer, you don't need to worry about setting the parameters for each image.

• LaserJet pro 400 m451nw - Print is too dark

  I have a LaserJet Pro 400 M451nw color, and every time I print any type of blue, it prints really dark.  Tonight, the blue on my monitor was a royal blue, and blue printed was almost black. I reduced the blue on the graph, but it's still not royal blue.  The program I use is MS Publisher 2013.

  Is it possible for me to adjust the parameters of the cyan cartridge, so it will not print so dark?

  Thank you

  SHJ

  Hello ayligcjdesign,

  Welcome to the HP Forums.

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Thank you for your time.

• LaserJet Pro M452dn color: Color LaserJet Pro M452 prints too dark

  All prints much too dark. Even in Photoshop, InDesign, Illustrator. I downloaded the user guide, but not able to find a way to adjust the intensity of output. Setting the output seems to be available for Windows only. Is - everyone there knows the secret formula for Mac users? Thanks in advance.

  Hello

  I usually check the option of directly on setting intensity her pinter.

  Go to system set up, select the print intensity or density and 3 is the default setting, it goes on a scale of 1 to 5, five being really dark, replace it with a 1 or 2 and try out it.

  Concerning

• large format HP 7110 prints come out too dark when using the choice of photo paper.

  My officejet 7000 would be to print borderless photos size beautiful poster even using a brand off paper. (Staples brand)

  But my new 7110 printer prints much too dark.  I choose the option "other photo paper.

  Hi @Ratboy2k Sunshyn here for help.

  I see that you're having trouble with your 7110 newly purchased. If your photos appear darker when you used the 7000 all programs? Have you tried to change the settings for print quality? You may need to change the quality at the standard. With the help of high quality may cause more ink on the page, your impressions would therefore appear darker.

  It could also be the selection of paper. Even if you are off mark paper, you don't have to choose "other photo paper. What are the options available in the selection of paper and what kind of paper do you use? I understand it of paper Staples, but must have a particular type as advanced, or premium and so on.

  I would like to do everything I can to help. Please post back with the requested details and I'll gladly come back and work with you to find a solution. Thank you.

• Canon ip4950 - prints too dark

  Canon Pixma iP4950 printer - prints much too dark. Different profiles tried both through Windows and Photoshop. The difference is well beyond the profiles.

  Parameters of the screen changed, altered the printer, photoshop changed settings. Service customer of Canon unaided with their suggested parameters. Up to date drivers.

  Former Canon iP4600 very good (a lot of use, worn, this display has & is not good up here!)

  Original toner cartridge or cartridges recycled / reloaded / reconditioned?

  It could be a faulty cartridge.

• hp deskjet 1510 printing too dark

  Hello

  As says the subject, my HP Deskjet 1510 printer is printing too dark. Does anyone know how to change this?

  Thank you

  Thanks for the reply.

  You try to print a photo, if so what program? If you print word documents, try printing in draft mode.

  I would like you open the printer from the desktop icon or go to Start> all programs> HP> Deskjet 1510> 1510 Deskjet series. The Printer Wizard, click the estimated ink levels> Services> print quality diagnostic report, not this dark printing page as well?

• Pictures Printing too dark

  HP Officejet 6500 a Plus All in One.  Windows 7, 64 bit.  Print all pictures too dark.  I have checked the cartridges, cleaned print head, set preferences - set everything I can think of.  Provides excellent print quality but all of a sudden this change.  Can not think of any change I made to the computer itself.  Any thoughts?  And thank you very much.  Small drives me crazy!

  Thanks for help. I did NOTthink of printing as a PROJECT; may have worked. But only one solution temporary vs a fix, right? I finally gave up and changed the black ink cartridge, even though it was almost new. With the new cartridge, returned to perfect photo printing. Now I think I bought a faulty cartridge. Once again, thaks for taking the time!

• CP1515n print too dark photos

  I have a printer HP color laserjet CP1515n's and no matter what I try settings, I can't seem to change the photo printing

  Print too dark

  Can someone help me with this problem

  Welcome to the Forums of HP Bazza46,

  By your post, I see that the photos are too dark print.
  I can help you with this problem.

  I have provided a document to solve Print quality problems see if that will help solve the problem.

  Make sure you select the type of paper in the printer driver and is not a default unspecified paper.

  Most of the settings should be set the application you are printing from.

  You use Genuine HP Toner?

  What kind of paper do you use?

  What are the results when you print the page of diagnostic quality and print?

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet 1300: LaserJet prints too dark gray

  I suspect that this can happen several HP Laser Jet printers.

  Even when I print a C = 0, M = 0, Y = 0, K = 10 Gray (a setting that makes gray barely distinguishable on screen) to the black wire, black is very difficult to read in print. Gray is simply too dark.

  I've looked everywhere and complaints most people about gray printing have to with the gray print thread too light. This isn't my problem.

  I have updated drivers with no luck.

  I am hoping there is a kind of software that will allow me to recalibrate the gray my HP Print.

  Any help would be greatly appreciated.

  There is no utility calibration for this printer. I am certified on them when they were new. Grey s printing too dark and you use the OEM toner cartridges then I would replace the engine Board. If you use replacement cartridges they print darker than the new HP cartridges and I just turn to OEM.

• My pictures are too dark when printing on an epson printer. they were ok on my last printer

  I just bought a new epson printer xp960. All my images printed from photoshop CS6 are too dark. If the print outside photoshop, they're ok. They printed accurately on my old Kodak printer. Epson sent me to Adobe

  Could you please uninstall the printer drivers once and then install the latest drivers for the printer.

• Too dark prints

  In CS5 I get printed pictures coming out too dark and with altered color. Regardless of evidence or settings paper settings that I use, they are always the same. I does not always seem to have this problem, but the impression that I am trying to print today is like it no matter what I do. What I am doing wrong?

  Well, it get close enough to the change of ink so he could be a suspect? I guess a lot of ink is possible. A rather tedious next step may be reinstall drivers printing factory.  You can also try a preference reset Photoshop: Mac - press and hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '. Try to hold the space bar when you click on the Photoshop print button too.

  Benjamin

• LR 2: workflow colorproofed but prints too dark. Help, please.

  Hello

  I'm new here. I have read all the other threads on this problem and tried all the proposals. But I can't solve the problem.

  In detail:

  IMac

  Progs: CS 2, CS 4, LT 2

  Printer: HP Photosmart B 9180

  Display: iMac + Eizo CG21

  ColorProof by eye - one display and colorvision spectrophotometer for printers.

  I even put the brightness and Gamma of the monitor for each type of paper measuring the brightness/white paper.

  In CS 2 all works very well. 100% matching printmakers.

  In LR 2: too dark images. Printer has the default value. Color-correct profile is selected. Printer is set up for color management software...

  If I send the same image of LR2 to PS2 to modify, print in PS2 without changes, everthing is ok.

  CS 4: Too dark prints as in LR2

  Help, please! I love LT2 to manage the huge amount of images and you want to use for printing photobooks (easier to print if you want to print pictures 20 or more...)

  Anyone have more tips?

  Thanks in advance

  I have the same setup as you, perhaps with the exception of the osX version (10.5.7).

  The impressions of my B9180 are thin and assorted in color managed LR and printer managed.

  Wheter that the printer is set up by default or not never made no difference.

  My printer driver version is 2.3.3

  However, I have the same problem with another printer and LR.

  The fact that people with the same configuration and drivers get different results only confirm my idea that there is a bug / flag in LR who gets together and then all your prints for a certain printer is screwed up.

  I am rather disappointed that Adobe has not corrected this and seems even to the same bug in CS4.

  I won't pay for LR or CS4 until I have confirmation that this bug is gone (if I were to upgrade to CS4 and get the same problem, I would not be able to print over all)

• Color LaserJet CP1515n print images too red

  I just changed all the color cartridge four new and original.

  Now the prints are too reddish.

  It concerns photo and documents pdf in color prints.

  Thanks for the quick response. The solution, however, was that I should address both the printer and the PC-program (Photoshop Elements) which colorprofile to use and also if the printer or PC to control the colors.

• My printer prints everything too small and landscape. It also doesn't let me choose Properties?

  I try to print on my printer and everything is too small and landscape. It doesn't let me go to properties when I'm ready to print?

  Hi KEVIN KATEMC * DONOUGH,.

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the question with the printer prints everything too small and landscape and not able to choose Properties.

  What is the brand and model of the printer?

  Did you change to the computer?

  This problem only occurs with this application?

  I suggest you to follow the steps and check.

  1. click on printer properties by clicking on the printer and select Properties.

  2. go in the general tab, and then to the bottom of the window, select Printing Preferences.

  3. in the next window remove the button called advance.

  4. in the eyes of graphics for scaling article. If you do not set to 100%, that might be your problem. Change to 100%, and test.

  I also suggest you to see the links and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  You experience problems when you view the printer properties in Windows XP or Windows Server 2003

  http://support.Microsoft.com/kb/922975

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows