HTTP proxy for AS2 delivery channel

Similar Questions

• Configure the HTTP Proxy for ESX4i

  Hey all,.

  I am fairly new to the virtual technology so excuse my ignorance. I just finished the training of PCV and I get some hands on experience using laboratory of my company. The laboratory network restrictions allow only internet access (and any other) my ESX hosts through a proxy server where I have to enter my credentials. (I need internet access for the NTP settings - for now).

  I tried to understand this for about 12 hours and I am very close to madness... I'm either missing something obvious like: 'you can't' or something that is not easy to find for someone like me.

  Thank you, Derek.

  Welcome to the Forums - I don't think it's possible to provide the proxy settings for your ESXi host - the around who is to create a virtual machine where you can configure the proxy settings that need to connect to the NTP source and whether your NTP Server internal -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Can I use IBM HTTP Server as Proxy for WebCenter content?

  When I worked in development, I used Apache 2.2 as a Proxy for WebCenter content.

  I would use the WebLogic Server plugin 'mod_wl_22.so' in Apache to redirect the request of WebLogic.

  In Production, I need to use IBM HTTP Server (IHS) as a proxy.

  I couldn't find any plugin WLS for IBM HTTP Server.

  When I looked at the note of support Doc-ID 1111903.1 , it does not included of IHS in the list.

  This means that IHS is not supported as a proxy for WebCener content?

  If not, can someone tell me where I could download the plugin, please?

  I tried to use the same configurations for Apache 2.2 to the IHS.

  Startup is fine, which means that IHS could load the module 'mod_wl_22.so '.

  But I got error 403 for the connection.

  I couldn't see any access connected the WLS, so I guess that the connection failed introduce to the IHS.

  Any suggestion, please?

  If you want to use for the work of pure http proxy that I don't see why it wouldn't work. However, I didn't a study on this specific topic. However, you may need to do more things manually in the configuration box, and it cannot be officially supported. The unsupported part is often a point where I suggest you use another product that is supported.

  Kind regards

  Johan.

• Transfer of licenses of Proxy for the UC phone to ASA newest

  A few questions about the issuance of licenses for the ASA and the licenses UC phone Proxy.

  1 if I buy a block of 24 licenses UC phone Proxy for the ASA 5510, I am able to add more than 24 blocks needed?

  2 can if/when tire upward to the ASA and ASA 5510 5520 or 5540, I transfer phone licenses Proxy to the ASA again?

  Thanks in advance.

  1. Yes, you can buy licensed user CPU upgrade for ASA 5510, with up to 100 users for ASA5510 UC. You can not buy however a user 24 existing UC to be added to the license of the 24 user license. You must acquire a license from 24 to 50 or 24 to 100-user license upgrade.

  Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  (Article 'Lines additional guidelines and Limitations', fourth ball point)

  2. No, the license is linked in the serial of your ASA no existing, and it is not transferable. Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  (Section 'Guidelines and additional Limitations', second indent)

  Hope that answers your questions.

• You can change the manual HTTP Proxy on windows 8 / Surface Access Sever, Port, and authentication

  On the iPhone and iPad, you can go on the Wi - Fi connection settings tap modern you have.  After that, you change the HTTP Proxy in manual.  Once you press it, you can put server, port, and authentication that put my school.  You can access these things on Windows 8 or the Surface Pro?

  I need to connect to the school for Wi - Fi to access the internet.

  Hello

  To change the proxy settings, try the following steps.

  (a) press the Windows key + R, type inetcpl.cpl , and then press enter.

  (b) click on the connections tab, and then click LAN settings.

  (c) put check Mark to use a proxy server for your LAN check box.

  (d), and then make your changes in the settings. You can also click on the Advanced tab for more options.

  (e) after making necessary changes click on apply then Ok to save the changes.

  Check out the link for more information.

  To connect to the Internet
  http://Windows.Microsoft.com/en-in/Windows-8/connect-Internet

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HTTPS proxy to WLS as HTTP client connection

  Hello
  
  I have an interesting situation with the WLS plug-in for iPlanet Web Server (to the WLS 10.3.6). Server 7u15
  
  I followed the installation instructions in the README file provided with the plugin, as well as in the reference manual Oracle Fusion Middleware using Web Server Plug - Ins® with Oracle WebLogic Server 11 g Release 1 (10.3.4) . With active debugging, I see that applications are indeed past WLS paths that I have defined. A test, I configured my WS7 obj.conf to pass the context/console to WLS (the admin webapp WLS console). This is the entry that I did in obj.conf:
  
  < ppath = object "/ console / *" >
  Service fn = "wl-proxy" WebLogicHost = localhost WebLogicPort = 7001
  "Debug = 'ALL' WLLogFile ='... /logs/WL-proxy.log ' DebugConfigInfo = 'ON '.
  < / object >
  
  If any URI that starts with /console/ will be sent to the instance WLS running on the local host, listening on port 7001 (HTTP). Since this is the loopback interface, I took a conscious decision to use HTTP to communicate with WLS as HTTPS would just slow things down right here.
  
  My WS7 instance is configured to listen for HTTPS requests (on port 443) - there is no listener running on port 80, because I want all applications to this SSL server. This configuration poses a problem with the console application.
  
  When I point my browser to the root context, WLS sends a header to redirect to the login page to the client, but it passes the https protocol to http. For example, I point my browser here:
  
  https://server.domain.LCL/console/
  
  I then see in the wl - proxy.log:
  
  2012-08-14 T 11: 52:25.1993 - 05:00 < 886813449631452 > header of WLS: [location] = [http://server.domain.lcl/console/login/LoginForm.jsp]
  
  .. .and Firefox will attempt to load this URL, but since I don't have any HTTP listener running, I get an FF error telling me that it cannot connect. If I manually update the URL in FF and specify https, it loads the login page. I then provide my user name and password and click Connect, and that returns a redirect of http://server.domain.lcl/console/index.jsp again defective because of bad Protocol.
  
  I have experimented with the WLProxySSL and WLProxyPassThrough parameters to the plugin, but they seem to have no effect.
  
  In comparison, if I use the WS7 integrated reverse proxy feature, the console app works perfectly. I guess that the WLS plugin is more effective that the proxy reverse WS7, however, this is why I am trying to get this to work.
  
  This raises two questions:
  
  1 is the WLS plugin really more effective than the proxy feature reverse WS7?
  2. How can I make sure that redirects be returned to the client are on https even though WLS sees the connection as being http?
  
  If the answer to #1 is no, then I'll just move on to use the reverse proxy and ignore the difficulty of dealing with the plugin.
  
  Thank you
  Bill

  Hi Bill,

  Try to activate WeblogicPluginEnabled.

  You can find this option under.

  Servers--> AdminServer---> Configuration--> General

  In advance.

  Kind regards
  Kal

• What are the good tutorials for AS2?

  l would like to build my portfolio using AS2 site.

  Anyone would be able to recommend a good site with tutorials for AS2?

  These Sites are very useful for you.

  http://www.freeadobeflashtutorials.com/

  http://www.Adobe.com/support/Flash/action_scripts/actionscript_tutorial/

  http://www.Flash-game-design.com/Flash-tutorials/funky-Flash-website-tutorial.html

  http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/2/help.html?

• Domestic delivery channel in 11g

  Hi gurus,
  Can anyone suggest the creation of a domestic delivery channel in Oracle 11 g.
  My scénarion is to send a file on the local computer using file system remote trading partner.
  
  Concerning
  REDA

  Hi reda,.

  is this two are identical or different.

  11 g, internal channels (for documents receipt of the main applications to send remote TP) is created in the host TP--> channels tab and they are marked as internal. If you want to set up a delivery for the host channel partner sales (for the receipt of documents from TP remote), then configure it in administration--> listening channels tab and make sure that it is not marked as internal. In addition, listening to the channels do not participate to an agreement.

  We must send an ASn to them by way of delivering inside using the protocols file

  You are unable to send message to a remote TP using internal delivery channel. IDC used to receive/send messages from/to final applications.

  In case you have any confusion, remember.

  Kind regards
  Anuj

• How to create a delivery channel internal CUSTOM QA.

  Hello
  
  I want to use a custom for inbound delivery internal QA channel. Can someone help me please in the configuration details.

  URI cannot be something. It takes an existing location to which Oracle B2B can connect using the credentials to connect (hostname, port, number and location identifier-URI).
  In your case, it must be b2b.custom_queue

  Kind regards
  Anuj

• Dialog box for browsing the channels DAQmx looks different on a PC without development of LV system

  Hello!

  When I browse for the physical channels or cDAQ from my development PC (Windows 7 64 bit, LabVIEW 2013), the following dialog box appears:

  

  This screenshot is the stand-alone executable. And the resulting string is: "cDAQ2Mod1 / ai0:2". Perfect.

  However, when I run the same executable on a machine that doesn't have a development system LabVIEW, but only runtime environment 2013 (automatically included with the Installer), the dialog box looks like this:

  

  "windows is tiny and not resizable, so he won't let not the user see the entire line, there no nice tree and the resulting string is: 'cDAQ9181-18B96FEMod1/ai0, cDAQ9181-18B96FEMod1/ai1, cDAQ9181-18B96FEMod1/ai2" which is much less readable than cDAQ9181-18B96FEMod1 / ai0:2.

  Apart from that, the apps work well.

  Is it possible to get the dialog box 1 on a PC running only the runtime environment?

  Thank you

  Baobob

  Support for Configuration DAQmx for MAX

  

• What is the name of the API for automatic delivery of planned order

  Hi, we do customization for automatic delivery of planned order what is the name of the API for that.

  Best regards

  Sachin

  Hi Salah,

  The API called Auto arrested planned alternate program is msc_release_pk.msc_auto_release.

  Hope that helps!

  Kind regards

  Mohan Balaji

• Create proxy for the image sequence

  Hey guys,.

  Today, I was delighted to see the newly implemented for PremierePro proxy workflow.

  Unfortunately I have not yet figured out how to apply this workflow for image sequences.

  Is this possible?

  Background:

  We do not stop motion animation and all our images always comes into frame sequences with each frame being 20 MP. We want to keep the resolution up to photo-serrure, because we would like to keep the possibility to crop and zoom into images.

  So far, we have created lowquality of sequences of images as proxies (in the same resolution) and they use them for editing in a FullHD timeline, where we can evolve and frame (and of course change) images. After picture lock replaced the original media. Once the images is online and the harvest is final, we create a FullHD prores file for VFX and editing.

  But this process is error-prone.

  When I now import a sequence of images in the creation and create a proxy for her, a mov with only the first image file is created.

  Which is obviously useless.

  My question:

  1 would it not possible to import a sequence of images and create a sequence of images of proxy (with the same interpretation of the images, i.e. of framerate) from the original image sequence?

  2. the sequence of images proxy perhaps erred in lower resolution (original image in format 5760 x 3840 px, resolution 1920 x 1080 proxy), and once I pass the proxy to original scaling is adjusted accordingly.

  Really looking forward to some tips to achieve this!

  Thanks and good luck

  Max

  I had a little further:

  I made a mistake by creating templates in the MediaEncoder:

  I created a coding model and not a model of ingestion (who both the end of the .edr file), which should in fact have been obvious.

  So now I have:

  1 has created a file of 5760 x 3840 Prores4444 out of sequence of images

  2 imported the first PorRes4444

  3 creates a proxy using my own template (ProRes 422 Proxy 1920 x 1280) with aspect ratio 3:2.

  It works, BUT:

  When I play the file on the timeline proxy, the proxy file is adjusted differently than the original file (proxy disabled), but only during playback.

  It is probably a completely different question, I'll create another post for this.

• Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Vanle

  Hi, I really need help... I can't find any broadcasting EBU-100/75, test your 1 KhZ, etc... I m going to do 15 masters short for Swedish broadcasting channel at night. -haha! and I can't find anything inside the first... I m I'm blind! Help, please! Paris looks Jokum

  Bay3Bob - you are great! Thanxxx :-)

• vRealize Agents of Proxy for the Automation Center

  Hello

  I have a vRA 6.2 installation, installed a proxy for Hyper-v agent and tried to set up the same as an endpoint. I'm running into two issues during the process.

  Question No. 1:

  When I try to create an endpoint after you create the proxy agent, the ability to choose "Hyper-v", as the type of the end point is missing. The only option I see is "vSphere. Now, this makes me think there is a problem with the initial installation of the vRA framework. I enclose the screen turned to the message.

  Have any one seem this before? What are the condition that the final option please (even before configuring it)? Already checked the licensing part. Support attaches to understand. The proxy agent shows online and very much. But there is some instance where to choose "Super v" as an endpoint is available even before you install agents. (including VMware lab)

  Question 2:

  Even after uninstalling the proxy on the server of IaaS agents, agents are still displayed in VRA-> infrastructure-> setting-> agents, prevents us from make the trials more that we are not able to add the same "Compute resource" with a proxy agent different, even after uninstalling the proxy agent. It's just the multiplication of the obsolete entries that support is still studying on it as well. Is there a way we can force delete the reference agent proxy in the VRA? I have uninstall agents using Windows Add or remove programs and cannot find the appropriate steps to uninstall a proxy agent.

  For some reason, I think the two issues can be interrelated. I restarted the server several times to verify.

  I appreciate all the help from your past experience. Thanks for the time.

  Your Correct, after spending some time with support, it has been the granting of licenses, when we entered VRA Advanced Suite licenses. It worked.

  Her reason why we discarded before licenses, there was another case where the same key is used option Hyper v was available, the only difference is the species has been headed as VCAC and put at level VRA. So technically if you VCAC instance with vCloud Advanced suite you will have the option to go to the top of endpoint of Hyper v, and you upgrade that instance to VRA with the same license key, the endpoint options are preserved. (Not so smart)

  Regarding the "Incidents2":

  It seems REALLY have no feature that would automatically dsregard uninstalled proxy agents. You need run a SQL query that is provided by helping remove computers that aren't actiuve. So best approach not to install agents in VRA unless absolutely necessary.

  The question did not help the reputation of VRA.

• Can I make video tutorails on Adobe creative cloud apps for my youtube channel and website and monetize it

  Can I make video tutorails on Adobe creative cloud applications like photoshop, after effects, first for my youtube channel and website and monetize it

  Here is the official information, if you want to read the details, licenses and terms of use | Adobe