Hyperion Planning Alias table question

Similar Questions

• ODI - Hyperion Planning metadata load question

  Hi all
  
  Loading metadata in Hyperion planning through SQl IKM - Hyperion Planning, a movement of a member from one parent to the other create a duplicate instead of moving.
  
  Here is an Ex:
  
  Oracle table - update data Source:
  parent, child, alias, storage, aggregation
  G3K, G285, xxxxxx, shared, +.
  
  In planning (before loading the interface):
  parent, child, alias, storage, aggregation
  G2A, G285, xxxxxx, shared, +.
  
  In planning (after loading the interface):
  parent, child, alias, storage, aggregation
  G2A, G285, xxxxxx, shared, +.
  G3K, G285, xxxxxx, shared, +.
  
  As you can see above, Member "G285" got double in planning. Not sure why this happens? am I missing something?
  
  ODI 10.1.3.5 & planning 9.3.1.09
  
  Appreciate your feedbacks.
  
  Thank you.

  Hello

  If you think about it so it is kind of correct what he does.

  If you have a member stored then you can't duplicate, so if you give the Member a different parent, then she will move the Member.

  Now shared members, you can have several duplicate, then when you load a shared member metadata, and a new parent so he does not know if you want to move the Member so it goes in the way of the creation of another shared member.

  If you are a member who is shared in two times and then give another parent, how would he know that you wanted to move.

  A possible solution to this is have an interface to remove members shared that you require no more, and then run the normal load of members shared in the correct location.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Question about RKM Hyperion Planning

  Hello
  
  We had set up the environment to load data into Hyperion Planning and environmental works very well since the first introduction. Recently, we add a new 'table Alias' in the planning application, and in order to load new description in the aliases table, re-run us the process reverses in ODI. However, we cannot find the new table "Alias" in ODI for the mapping of data after completing the reverse process. Any thoughts?
  
  The environment, we have:
  ODI 10.1.3.4.6 on Windows 2003 Server
  Hyperion Planning merger Edition 11.1.1.0.0
  RKM Hyperion Planning version 9.3.1.1
  
  Kind regards
  James.

  Hello

  While you say that he has failed, he produced errors?
  In any case, you could still use the new data store, or just manually add a column in the existing data store.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Strange question: Hyperion Planning Forms becomes read-only and data are destroyed: 11.1.2.2

  Hello

  Let me start by saying that I am not new to Hyperion Planning. We encounter a weird problem in our Test System. We notice that some (NOT ALL) of our tour of webforms in readonly webforms. all the cells in the gray form. It comes to despite the fact that the read-only checkbox is not checked in the form as well as the security is fine on all dimensions; Basically, all the cells of the form are valid combinations.

  The form becomes readonly, and all the data on this form is always Wiped. This has happened only for two web forms so far. We took a lot of Calc (none of the Calc have cleardata command). We do not know why this is happening. Maybe it's a bug in the product... not sure. has anyone seen this behavior before?

  Please let me know.

  -

  PK

  Please skip this question. It happened because someone on my team had added a member under umbrella of level 0.

• Issue of Hyperion Planning Smart View with the names of the members & alias

  Hello
  
  IM using Smart View "Essbase' connection to a worm 11.1.1.3, however the connection of essbase, Hyperion Planning Application I'm not able to select the view options smart to see the alias, the members or both. I change the setting (duplicate names allowed members = true) directly the properties of the sketch in EAS, and now I am able to see the names of borrowing, but if time I update it using web/workspace planning, this setting is cancelled. In addition I don't have something I should use with planning. Any comments?
  
  Kind regards

  First of all, I hope that you have not changed the properties of the sketch in environmental assessments for a planning application.
  For more information on the use of pseudonyms in smartview have a read of:- Smartview - display options to display the names of the - alias
  Also you only will be able to view member name or alias not both at the same time.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What the tables in return for Hyperion Planning

  Hi gurus,
  I need to save Hyperion Planning application database tables. I don't know what I need to back up the tables. Could someone share the names of tables or the docs that could help me.
  
  Thank you
  Rahul-

  Hello Rahul,

  You must take the backup of application schema of planning instead of the planning tables.

  Hyperion 9.3.1 - 78 tables created on the back-end
  Hyperion 11.1.1.1 - 83 tables created on the back-end

  Taking the backup scheme:
  -------------------------------------
  Using export dump utility, export Oracle dump file

  c:\expdp hypapp/hypapp@hyperion dumpfile = pra.dmp

  Note: the above dump file stored in the mentioned location below
  Oracle 10g: G:\oracle\product\10.2.0\admin\orcl\dpdump\pra.dmp
  Oracle 11g: E:\app\Administrator\admin\hyperion\dpdump\pra.dmp

  Please get back to me if in doubt.

  Thank you
  PC

• Unable to see IKM Hyperion Planning loading metadata from the file/Tabl

  Hello
  
  I am unable to see the IKM SQL for Hyperion Planning Knowledge Module in the stream tab. I have reverse engineered the KM and I see the KM in my project (having only 1 project). I am trying to load the metadata of the file up to planning and selected different refuelling area of target. I was able to debone planning cube models ODI successfully.
  
  ODI Version: 11.1.1.6.3
  Planning version: 11.1.2.2
  
  Any help will be appreciated.
  
  -Kash

  The workaround is

  After you import the IKM, open the KM and go to "Setting"-> "Source Technology"
  Manually change the generic value of 'Technology' of 'SQL' to 'Undefined '.
  Save and proceed with your new creation of interface

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Planning - display of security filters

  Hello Oracle Hyperion Planning gurus,

  I have a question. I have two applications Hyperion Planning. I've been editing filter security for users and have found an inconsistency.

  In one application, the user name is present as a given name + family name, and in the other application, the user name is displayed as user name.

  I tried to be consistent and change the view, but I wasn't able to find anything.

  Is there a setting for this option?

  I've attached screenshots for your comment.

  

  As noted above, the username is indicated by first name + last name

  

  As noted above, the user name appears by username.

  Two applications are built on the same version of planning an application. Does anyone know how to change this setting?

  The tables are generated by going under Administration tab-> manage-> security filters

  Thank you in advance,

  Luke

  Have you tried the Administration > Application > settings

  Display the full name of the user, change the setting to Yes/No and save

  See you soon

  John

• Hyperion Planning calco - FIX and IF condition script.

  Gurus

  I'm new to Hyperion Planning and have a question:

  I'm writing the script of followgin and he looks up and as the listed error.

  SCRIPT:

  / * STARTCOMPONENT:SCRIPT * /.

  COPYMISSINGBLOCK OFF SET;

  DIFFICULTY ('AC_91100', 'AC_91380', 'AC_92105', 'AC_93100', 'AC_94105', 'AC_95100', 'AC_96100', 'BegBalance',

  ('Current Service level', 'FU_0', 'FN_00000', 'LO_000000', 'FD_100', 'FD_200' and ProposedYear,"Baseline",@Relative ("project", 0), @Relative("Total Entity", 0))

  ("AC_91100"

  IF ("Start Date"->"projected" is #MISSING AND 'End Date'-> 'projected' == #MISSING)

  DATACOPY 'Start Date'-> 'Budget' to 'Start Date '->' projected ';

  DATACOPY 'End Date'-> 'Budget' to 'end '->' Date projected. "

  ELSEIF ("Start Date"->"projected" == #MISSING AND 'End Date'-> 'projected'! = #MISSING)

  DATACOPY 'Start Date'-> 'Budget' to 'Start Date '->' projected ';

  ElSEIF ("Start Date"->"projected"! = #MISSING AND 'End Date'-> 'projected' is #MISSING)

  DATACOPY 'End Date'-> 'Budget' to 'end '->' Date projected. "

  )

  ENDFIX;

  / * ENDCOMPONENT * /.

  Error message when I validate the script:

  An error occurred while parsing the script.

  Please check the script between the column in the row: 9: 71 and column: C9: 78.

  Found token '#MISSING'- expected tokens: <EOF>,<DIGIT>,<LETTER>,"/*STARTCOMPONENT:SCRIPT*/","/*ENDCOMPONENT*/","/*STARTCOMPONENT:FORMULA*/","/*STARTRULE*/","/*ENDRULE*/","/*STARTTEMPLATE*/","/*ENDTEMPLATE*/","\"File\"","\"Binfile\"","\"DSN\"","DataExportLevel","LEVEL0","\"LEVEL0\"","INPUT","\"INPUT\"","DataExportDynamicCalc","DataExportNonExistingBlocks","ON","\"ON\"","OFF","\"OFF\"","HIGH","LOW","DEFAULT","ONLY","AFTER","SUMMARY","DETAIL","ERROR","WARNS","INFO","NONE","DEBUG","WARNING","DataExportDecimal","DataExportPrecision","DataExportColFormat","DataExportColHeader","DataExportDimHeader","DataExportRelationalFile","DataExportOverwriteFile","DataExportDryRun","@_false","@_true","NUMBER" , 'MEMBER', 'BOOLEAN', 'STRING', < COMMENT_CPP_STYLE >, < SPACE >, "/ * ',' ' * / ', '\n', < token of type 56 > '\"","\"","\n', < token of type 60, > '[[',']]', '\n', < token of type 64 >, < SUBST_VARIABLE >, < hfm_VARIABLE >, < MACRO >, < REAL_NUMBER >, < INTEGER_NUMBER >, ' Tot ', 'ALL',"\ 'ALL\' ", 'AND', 'TABLE', < CALC >, 'CCONV', 'CLEARBLOCK'" ,"CLEARDATA","DATACOPY","DATAEXPORT","DATAEXPORTCOND","DATAIMPORTBIN","DIM","DYNAMIC","ELSE","ELSEIF","ENDFIX","ENDEXCLUDE","ENDIF","ENDLOOP","EXCEPT","FOR","ENDFOR","FIX","EXCLUDE","IF","LOOP","MBR","NONINPUT","EMPTY","NOT","OR","REFERENCE_TO_PARAMETER","RUNJAVA","SET","TO","TOLOCALRATE","UPPER","VAR","DATAEXPORTOPTIONS","AGGMISSG","CACHE","CALCPARALLEL","CALCTASKDIMS","CCTRACKCALC","COPYMISSINGBLOCK","CLEARUPDATESTATUS","CREATENONMISSINGBLK","CREATEBLOCKONEQ","DATAIMPORTIGNORETIMESTAMP","EMPTYMEMBERSETS","FRMLBOTTOMUP","FRMLRTDYNAMIC","LOCKBLOCK","MSG","NOTICE","REVERSE","REMOTECALC","UPDATECALC","UPTOLOCAL","::","#MISSING","=","->",<EQOP>,<MULOP> , < MDXMbr >, < SHORTQUAL >, < ID >, < INTEGER >, < CHAR >, < RELOP >, '@Loopback', < FUNCTION > "(", ";", ",", "[","]", "{","}", "-",") ReplaceAll ',' ','. ',' + ',': = ','": ' "

  *****************************

  Let me know what mistake I am doing here. Any help is greatly appreciated. Thanks in advance.

  Thank you

  SR

  A few errors in this script:

  1 DATACOPY is not allowed inside the IF block. You can use the assignment ('=') instead of datacopy

  2 ENDIF is missing. You should have ENDIF before hook closing.

• Configuration of Hyperion Planning-

  Installation on my laptop via VMware.  Following procedures by J. Turrell. Everything is fine until I'm planning configuration.  When I try to configure the SS database, I get the following message: "EMPCFG-10368: unable to connect to the database."  Check the database connection information'.

  Database is SQL Server 2008

  Couple quick questions to start:

  Version of Hyperion Planning? What OS are you installing on? The box can speak for itself (Microsoft Loopback adapter, input tables ip if some flavors of Linux). Is there a firewall in the way? Is the database that is top and listen?

  Since it's SQL Server - you have enabled TCP/IP?

  Some other positions:

  E.M.P. 11.1.2.2 Config Error - EPMCFG-10368: unable to connect to the database.

  Good luck! Let us know.

  Thank you!

• Hyperion Planning TxtCase appear in OBIEE reports.

  Hello
  
  The requirement is corresponding Hyperion Planning entered in forms on OBIEE reports comments. I was able to retrieve details about the author, content of the note as well as the corresponding dimensions in considering the following tables:
  1.HSP_CELL_NOTE
  2.HSP_CELL_NOTE_ITEM
  3.HSP_OBJECT
  4.HSP_USER
  
  But I'm confused about the later approach that I take. How the Federation would be made with the Essbase cube in the OBIEE repository? How comments should be referenced to specific OBIEE reports corresponding to the Hyperion Planning Forms?
  
  I use Hyperion Planning 11.1.2.2 and OBIEE 11.1.1.6.
  
  Any help is appreciated.
  
  Thank you and best regards,
  Karamba.
  
  Published by: Karamba SJ on May 29, 2013 12:06 AM

  The problem has been resolved. For example. For comments, a notice must be created in the relational database where the records retrieved from the HSP_CELL_NOTE and HSP_CELL_NOTE_ITEM HSP_OBJECT, the Member of dimension alias names must be recovered form HSP_ALIAS or HSP_MEMBER in the view. Then using the lookup function in OBIEE, we can extract the value (comment) the relational database view looking upward with the names of members alias Essbase in the MDB layer. Thanks to Charles Philippe for orientation. Hope it helps others.

  Thank you and best regards,

  Karamba.

  Post edited by: DebaratiSJ

  It seems strange to own brand as a correct response, but just to make sure that the issue has been addressed and that the right answer is available.

• Hyperion Planning 9.3.1 to 11.1.2.2 applications Migration

  Nice day
  
  We need to migrate a Hyperion Planning 9.3.1 to a 'classic' Hyperion Planning 11.1.2.2 application application. Why classic? Because we don't see the need to have an application of EPMA.
  
  We are not quite sure of the procedure. Can you please help me check the steps?
  
  1 save the relational tables of demand in the 9.3.1
  2 backup essbase objects (rul, otl, CSC, rep)
  3. install EPMA 11.1.2.2 in a new server, including a new instance of sql server.
  4. create a new application database name and connection and apply a 'create', ' create a new request of planning on version 11 ensure that the admin is the same name as your old 9.3 planning app.
  If the admin of your 9.3 planning takes a native user and not the system default hyperion (account = admin) admin then
  'Go into the database for the planning tables app and HSP_USERS table, store the value of the user 50001 SID' JohnGoodwin:
  Re: upgrade planning 9.3.1 to 11.3
  
  5. stop services to stop the application.
  6 restore all relational tables of the 9.3.1 application (step 1) in the application only (step 5).
  7. change in the application of database XXXXXXXXXXXXXXXX
  8. start services, applies to create in the application.
  9. copy of objects (step 2) except otl.
  10. export the data of the 9.3.1 and import data from 11.1.2.2 application.
  
  So I guess this we will have a new Hyperion Planning application in 11.1.2.2 with contour, web forms, to-do lists, etc.
  Other questions:
  • Is it feasible? Or I need to first import a 11.1.1.3 planning application instance? And then from there move to a 11.1.2.2 instance?
  How can • what business rules, I import them at calc Manager, which is simple operations?
  • What security? What do I need to create security groups and users to the SSP before step 6.
  • All of the warnings?
  
  Sincerely, thank you for your help
  
  Published by: Pavel Moreno on March 4, 2013 05:54
  
  Published by: Pavel Moreno on March 4, 2013 05:55

  Pavel Moreno wrote:
  Hi John,.

  Thank you for you answer. Do you mean that the process should be as follows (I have add step 4 and remove step 7)? What is a migration of business rules and GestionnaireCalc, how can I move it?

  Have a read of http://john-goodwin.blogspot.co.uk/2013/01/alternative-methods-for-migrating.html

  John
  http://John-Goodwin.blogspot.com/

• Options of FDM and Hyperion Planning Mapping

  Hi, good day
  My team has an implementation of FDM and Hyperion Planning worm 11.1.2. We essentially use foot-and-mouth disease, because we need a place to keep the mapping tables different (friendly) to the dimensions of accounts, to be able to load the data.
  
  My questions are; When loading the data, we should always map sizes? Is it possible to avoid it?
  
  For example, in the model, we have 300 accounts, 20 entities and 400 products. We need to map accounts because they are different for all entities (in the source data), but not products. That is why I want to avoid mapping products (and maintain this mapping) when loading the data. Is this feasible? Any ideas?
  
  Kind regars

  Only you can do that, if you need to your dimension product to identify the data point in your application target, it must be active and must therefore be sought.

• Set up multiple alias tables

  Hi John,.
  
  We intend to implement multiple alias tables in our planning application.
  
  I have a few questions about the same. I had gone through to the planning and essbase Administrator's guide.
  
  1. in the administration of planning guide, it is mentioned that a member may have 32 alias by Member of the dimension, including the default alias.
  
  What these 32 alias (if used all 32) get stored in 32 different tables?
  
  2. in Essbase guide it says you can create up to nine tables aliases in Essbase
  
  Is it so and more from 32 can I create more than 9 tables in essbase? If I use more than 9 planning tables when I update the essbase application will have only 9 or create all aliases defined in essbase
  
  3. at a time can I use several aliases for different members or is a single table active for the entire application
  
  Please let me know some info from the use of multiple pseudonyms and how it works.

  I know that the issue is for John :) but I hope you don't mind putting me my free of cost (may be waste of time) entered ;)

  2. in Essbase guide it says you can create up to nine tables aliases in Essbase

  Is it so and more from 32 can I create more than 9 tables in essbase? If I use more than 9 planning tables when I update the essbase application will have only 9 or create all aliases defined in essbase

  The Planning and Essbase can have 32 Alias tables:
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_dbag/limits.html

  1. in the administration of planning guide, it is mentioned that a member may have 32 alias by Member of the dimension, including the default alias.
  What these 32 alias (if used all 32) get stored in 32 different tables?

  For more information about aliases, which are stored, you may need to take a look at HSP_ALIAS and HSP_OBJECT.

  3. at a time can I use several aliases for different members or is a single table active for the entire application

  You can set which Alias table to use, at the same time a single table will be active.

  For more information:
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_admin/ch12s03s01.html
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_admin/ch12s03s07.html

  Bravo...!
  Rahul S.

• ODI to load dimensions in the Application classic Hyperion Planning 11.1.2.1

  Hello
  
  I tried to load some dimensions in Hyperion Planning 11.1.2.1 Classic Application using ODI 11 g.
  
  The problem, just the other side is
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 23, < module >
  at com.hyperion.odi.planning.ODIPlanningWriter.validateColumns (unknown Source)
  
  at com.hyperion.odi.planning.ODIPlanningWriter.loadData (unknown Source)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: the source result set contains the column [C1_ACCOUNT] that has no corresponding column on the side of planning.
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  
  This is the code that returns the error
  
  from com.hyperion.odi.common import ODIConstants
  from com.hyperion.odi.connection import HypAppConnectionFactory
  import java.lang class
  import java.lang Boolean
  import java.sql *.
  from java.util import HashMap
  #
  # Get the select statement in the meeting area:
  #
  SQL = "" "select C1_ACCOUNT 'Account', 'Parent' C2_PARENT, C3_ALIAS__DEFAULT ' Alias: Default ', 'Memory' C4_DATA_STORAGE, C5_AGGREGATION__PLAN1_"(Plan1) aggregation"of" C$ _0Account "where (1 = 1) '"
  
  srcCx = odiRef.getJDBCConnection ("SRC")
  
  stmt = srcCx.createStatement)
  
  srcFetchSize = 30
  
  stmt.setFetchSize (srcFetchSize)
  
  RS = stmt.executeQuery (sql)
  
  #load data
  stats = pWriter.loadData (rs)
  
  #close the database result set, connection
  RS. Close()
  stmt. Close()
  
  I created 2 models in my designer:
  
  HYPERION_MODEL_TEST and ORACLE_SQL_SOURCE, the first has the reverse engineering dimensions ranging from planning and the other is to get the table that contains the members of my size. For the staging area, the synopsis in memory DB is used.
  
  LKM SQL for SQL and SQL IKM in Hyperion Planning is used.
  
  In the interface, I take the source table and the dimension of planning as a target I map the Parent, Alias account: by default, the data storage and ownership of aggregation (Plan1) of the target of the GBA in my dimension table.
  
  All be saved well and when I run it I get the error, clues?
  
  Cheers, Sandi

  First of all there is no interest in using the memory storage engine as the staging area if Oracle is your source, you can also use Oracle as the transit area, the staging area probably will not be used as usual a straight SQL query will be generated.
  In your target mappings have also tried setting "run on the staging.

  See you soon

  John
  http://John-Goodwin.blogspot.com/