I also need the BIOS A8M2N - THE (Naos GL-6) 3.0

Similar Questions

• CQ61-313us: maestro also needing help code is 75957252 for the bios password reset

  Maestro also needing help code is 75957252 for the bios password reset

  Check your other post. I answered here.

• Need the original BIOS for Satellite C850-B237

  I was updating Toshiba Satellite C850-B237 insydeh20 bios, but after having restarted the laptop its bricks.

  Now I need the Original bios (no updates) to boot from USB might work. Who should I contact for oraiginal bios?

  I can imagine that Toshiba service provider in your country can help you with this. They must have access to the database of Toshiba and also access to all previous versions of the BIOS.

• I need the BIOS for my gateway T - 63 Lap Top series.

  I have a gateway T - 63 Lap Top series. The part of the motherboard is #: ACEH-40GAB1700-F605.
  The serial number is: V94DM03707.

  I tried to contact the bridge, but the information (serial number) that the system is requested to attend my request are scratched down my Lap Top.  So, I'm unable to download a copy of the BIOS that I need.

  I have problems with;
  (1) the fan constantly racing
  (2) the slow computer
  (3) the CPU constantly rotates between 55% and 75%

  The computer was working fine until my daughter started to use it.

  I have;
  (1) clean all cooling assembly and charges
  Heat sink compound
  (2) with doing the checking various sources on
  the web is recommended.
  (3) I also replaced the hard disk; The laptop was
  OK for about two days later and then the problem comes back.

  It was suggested that I should re-flashing the BIOS, but as I mentioned previously, I can't download from the Gateway Web site.

  I am seeking support from this community to help solve this problem.

  Thank you very much.

  [edited to partial serial number for privacy - please do not post personal or unique information such as but not limited to full of names, email addresses, phone numbers, full of serial numbers, etc.]

  the only BIOS available is:

  BIOS

  Entry door

  BIOS

  89.91.24

  3.2 MB

  13/07/2010

  Download

  You can find it, do a manual search here:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

• I need the old Bios for my Satellite A100-233 PSAA8E

  I had updated my BIOS to version 6 and now my battery doesn t even hard 10 min... it see the 103 percent when it is fully charged...
  Is it possible that I can get my old BIOS... I think than v5.1

  Hello

  It's very strange

  First of all you will not be able to download the old version of the BIOS for Toshiba page provides only the most recent versions.
  So if you need the old BIOS, you will have to ask the help of the ASP

  With regard to the issue;
  I'm not very well if the BIOS has something to do with it, maybe you should unload until the battery would be total empty m and then try to charge it again.

  Check it out!

• Satellite U400-10W (PSU40E): need of BIOS to fix the battery problem

  Hello

  I already have a Satellite U400-10W (PSU40E) with the issue reported in the technical knowledge base (the battery is not recognized and does not load after a long period without power).

  To solve this problem I need a bios or above 3.0 but the latest available bios (4.00 - bios - 20090430082154.zip) in the download page refers to an invalid link.

  Please is - someone has a bios (version 3.0 or higher) for Win32 poster systems?

  Thanks in advance.

  OK, thanks for this entry.
  I think there could be something wrong with the Server driver Toshiba European page
  I think it will be corrected in the next time lets hope ;)

• Re: Satellite A210-MS5 - I need the original BIOS

  Dear colleague,

  I am very sad to have a failure on the update of the BIOS. Now, unable to start my machine (Satellite A210 MS5). I'm trying to reflash using the method of the crisis recovery disk. I need the original BIOS Version. : 1.00. Anyone have this version and send it to me? Thank you very much! My email is [email protected]

  Do you have an experience about it? How can I recover my BIOS?

  Thanks again

  Hey Buddy!

  Sorry but I n the new good t for you. On the Toshiba site, you can download the most recent BIOS and older versions of BIOS are only for the available authorized service providers.
  In addition a BIOS downgrade is possible to the ASP.

  So in your case, I would go to the nearest ASP that you can find on the Toshiba site and ask for help. Technicians can help you:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Help I need the Bios pass HP Mini 110 - 1125NR

  Hello, I need help me please I'm going crazy! I need the password for the bios of HP Mini 110 - 1125NR
  And s/n: [number of Series edited by Moderator]

  Hello

  Enter: e9lov3q01z (to be noted that the 3rd character is a lowercase L and the 8th is zero)

  Kind regards

  DP - K

• Trying to install: WindowsXPMediaCenter2005-KB900325-usa__but I discovered that I also need this, but it gives me the error code 1706: KB867460 - NDP1.1sp1 - X 86

  Hello, I have Windows Media Center, and I tie to get the 2 Roll-up so I can connect my computer to my xbox, but I need to do this: WindowsXPMediaCenter2005 KB900325-United States, but it will not install. I think the problem is that I do not have this: NDP1.1sp1 - KB867460 - X 86

  But when I try to install that, I get the error code 1706

  And Yes, I checked the solution to this on the support Web site, and it says to install the Net 1.1 sp1 which as I have said, does not install

  I have checked the updates in my Add & Remove Programs, and I have no patch 1.1 (but take note I have two 1.0 patches) which is something that my computer can not have on it in order to install Net 1.1 sp1

  So yes, I tried to call microsoft for some time, but can not get a person, and the machine cannot help. I also tried the Fix - it program. So yes, I could really use some help, I tried to understand this for quite awhile.

  Thank you.

  P.S. Don't copy and paste this, that of what I tried to do http://support.microsoft.com/kb/900325...

  Edit: I did a search in all files and folders, and my computer found no netfx.msi (I also tried to run) which is the place where I think that my computer wanted Net 1.1 sp1 must be installed...

  Hello
   
   
  a. create a folder named 'Framework' at the root of the C: drive.
  i. open workstation.
  II. right-click on "Local disk, C:" and select 'open '.
  III. on top of windows, select 'File' and then 'new' then 'folder '.
  IV. This will create a new folder and leave the cursor in the box .and files name 'framework '.
  b. download the Microsoft .net Framework v1.1-
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3
   
  and save it in the C:\Framework folder
   
  c. download the Microsoft .net Framework v1.1.4322 Service Pack 1.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A8F5654F-088E-40b2-bbdb-A83353618B38 & displaylang = in
   
  and save it in the C:\Framework folder
  (d) extract the required files by running the following commands from the
  Start-Run dialog box:
  C:\Framework\dotnetfx.exe t:c:\framework\extracted\ / c
  e. clear the Temp folder:
  i. Select 'Start' and then 'run '.
  II. Type "%temp%" without the quotes, and then select OK.
  III. delete all the files found and if they won't erase continue to another.
  f. install .NET Framework 1.1 SP1 of
  c:\framework\NDP1.1sp1-KB867460-x86.exe, if this attempt fails for some reason any
  Please, do the following and send me the c:\sp1.log that results.
  g. remove the SP in the root of C by using the following command from the
  Start, and then run the dialogue:
  C:\Framework\NDP1.1sp1-KB867460-x86.exe /xp:c:
  h. do the following to install the connection using the following command
  from the start-> Run dialog box:
  msiexec /p c:\S867460.msp/l * v c:\sp1.log REINSTALL = ALL
  * If the file is not found, please do the following as we saw some
  systems to extract the file in the local folder instead.
  msiexec /p c:\framework\S867460.msp/l * v c:\sp1.log REINSTALL = ALL
  I. Si you are prompted for the 'netfx.msi' navigate to the location
  c:\framework\extractedetfx.msi, Installation should continue without
  error.
  
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  original title: bios update

  Hello

  you have a problem here as Dell does not have Windows 7 drivers available for your model of laptop etc, etc.

  Unfortunately, you need these Windows 7 drivers, etc. to upgrade to Windows 7

  read the information on your laptop on the link below

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1720&CATID=-1&impid=-1

  For more information contact Dell about this

  Dell support:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• Adobe first Elements 13 is listed as $79.99 (alone) or WITH Adobe Photoshop elements 13 for $119.99 (for both). I bought 13 items first by itself for $79.99.   Now, I realize that I need the 13 elements of Photoshop also.     My question I

  This is my first attempt in the Adobe community. I hope I'm doing this correctly.

  Please send me an email to [email protected] If you can answer my question.

  I'll paste it again here. Thank you! John

  QUESTION:

  Adobe first Elements 13 is listed as $79.99 (alone) or WITH Adobe Photoshop elements 13 for $119.99 (for both). I bought 13 items first by itself for $79.99.   Now, I realize that I need the 13 elements of Photoshop also.

  My question is: can I put the $40 more (purchase price of $119.99 in combination) to buy the 13 elements of Photoshop? Or do I have to pay the price of $79.99 (yet) to buy the 13 elements of Photoshop?

  There is no option to upgrade on the website of the $40 more purchase price (which would be equivalent to the original price of combination $119.99) after I bought the first 13 items only ($79.99).

  gt40john

  This isn't Adobe. Instead essentially a user to user forum.

  Suppose you bought the items 13 as a download from Adobe first.

  Adobe sells more than 13 Photoshop or Premiere elements 13 elements. He sells only the latest version now (v14).

  If you bought the first 13 elements download Adobe over the last 30 days, you should be able to request a return/refund from Adobe. I do not know how he would deal with an Exchange because it sells more than 13 - May 14 deal might be involved? Just in case you are eligible, Contact Customer Care

  And, if you bought elsewhere (from an authorized dealer), you are governed by the policy of return/refund/exchange of the authorized dealer, not Adobe direct.

  But if you are not within 30 days of the purchase, you'll probably eventually find a dealer authorized to buy Photoshop elements 13, although it is still available.

  Many scenarios here, but you should have business with Adobe on this if it goes back to the purchase of Adobe. If this isn't a direct purchase from Adobe, your fate is up to the dealer.

  RTA

  Add on... Please don't include contact information in your messages to avoid unwanted nuisance to your contact information.

  A moderator may delete such information once it is noticed by a moderator.

• I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?

  I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?

  Find the serial number of your Adobe product quickly

• I had the deparquement cloud testversion and now I want to buy it in the monthly OBA for 59.99 euros. I have an Adobe ID, but when I want to pay the abo it says payment system is not available and it is also the telephone hotline adobe! I really need the

  I had the deparquement cloud testversion and now I want to buy it in the monthly OBA for 59.99 euros. I have an Adobe ID, but when I want to pay the abo it says payment system is not available and it is also the telephone hotline adobe! I really need the software of any emergency! No idea why I can't pay online? That's what he says in tiny letters below: USER_STORE_COUNTRY_MISMATCH?

  Hi Frederic,.

  The country store & the Adobe ID, payment details must be same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:

  Change the country associated with your Adobe ID

  Guinot

• Mr President I allowed Adobe Illustrator and photoshop for the windows version, but I also needed Mac version. How can I get the mac license. Please give me the right answer. Thank you, Sir, I have the license of Adobe Illustrator and photoshop for window

  Mr President

  I allowed Adobe Illustrator and photoshop for the windows version, but I also needed Mac version. How can I get the mac license. Please give me the right answer.

  Thank you.

  Shaji Samuel

  Hi Shaji, please see: a product for another language or version of trading platform

  I hope this helps.